Infrared LED
L9337 series
High power LED for optical switches
The L9337 series is an infrared LED developed for optical switches. Because a high-power LED chip is mounted, the L9337 series provides higher radiant output power than previous devices, yet is available at a low cost due to the improved manufacturing process. The L9337-01/-02 use a high reliability package making them suitable for automobile applications.
Features
High radiant output power High reliability Low price
Applications
Optical switches Automobiles
Absolute maximum ratings (Ta=25 °C, unless otherwise noted)
Parameter Symbol Condition Reverse voltage VR Forward current IF Forward current decrease rate Ta > 25 °C Pulse width=10 μs Pulse forward current IFP Duty ratio=1% Pulse forward current Ta > 25 °C decrease rate Power dissipation P Operating temperature Topr Storage temperature Tstg *1: The L9337 is guaranteed to resist temperature cycle test of up to 5 cycles. Value 5 80 1.1 1.0 13 150 -30 to +85 -40 to +100*1 Unit V mA mA/°C A mA/°C mW °C °C
Electrical and optical characteristics (Ta=25 °C)
Parameter Peak emission wavelength Spectral half width Forward voltage Pulse forward voltage Reverse current Radiant flux Cut-off frequency*2 Symbol λp Δλ VF VFP IR φe fc Condition IF=50 mA IF=50 mA IF=50 mA IF=1 A VR=5 V IF=50 mA IF=50 mA ± 4 mAp-p Min. 840 18 25 L9337 Typ. 870 45 1.47 3.5 23 40 L9337-01 L9337-02 Max. Min. Typ. Max. Min. Typ. Max. 900 840 870 900 840 870 900 45 45 1.55 1.47 1.55 1.47 1.55 4.3 3.5 4.3 3.5 4.3 5 5 5 10 13 7.5 10 25 40 25 40 Unit nm nm V V μA mW MHz
*2: Frequency at which the optical output drops by -3 dB from that at 100 kHz.
www.hamamatsu.com
1
Infrared LED
L9337 series
Emission spectrum
100 (Typ. Ta=25 °C, IF=50 mA)
Radiant flux vs. forward current
1000 (Typ. Ta=25 °C, tw=100 µs, 0.1%)
80
Relative radiant output (%)
60
Radiant flux (mW)
100
L9337
40
L9337-01 10 L9337-02
20
0 810
830
850
870
890
910
930
1
10
100
1000
Wavelength (nm)
KLEDB0249EA
Forward current (mA)
KLEDB0250EB
Forward current vs. forward voltage
1000 (Typ. Ta=25 °C, tw=100 µs, 0.1%)
Directivity
(Typ. Ta=25 °C) 20° 10°
100 %
10°
20°
L9337-01 30° L9337 L9337-02 80% 30°
Forward current (mA)
100
40°
60%
40°
50° 60° 70° 10 1.0 80° 1.5 2.0 2.5 3.0 3.5 4.0 90°
40%
50° 60°
20 %
70° 80° 90°
Forward voltage (V) Relative radiant output (%)
KLEDB0251EB KLEDB0252EB
2
Infrared LED
L9337 series
Radiant output vs. ambient temperature
2 (Typ. IF=50 mA)
Allowable forward current vs. ambient temperature
(Typ.)
Relative radiant output (dB)
1
Relative allowable forward current (%)
100
80
0
60
-1
40
-2
20
-3 -40
-20
0
20
40
60
80
100
0 -40 -20 0 20 40 60 80 100
Ambient temperature (°C)
KLEDB0253EA
Ambient temperature (°C)
KLEDB0254EA
Allowable forward current vs. duty ratio
10 (Typ. Ta=25 °C)
Allowable forward current (A)
PULSE WIDTH=1 µs 1 PULSE WIDTH=10 µs PULSE WIDTH=100 µs 0.1
0.01 0.01
0.1
1
10
100
Duty ratio (%)
KLEDB0038EA
3
Infrared LED
L9337 series
Dimensional outlines (unit: mm)
L9337
2.3 ± 0.3 5.4 ± 0.1 Clear epoxy resin 4.2 ± 0.1
L9337-01
5.4 ± 0.2 4.65 ± 0.1
L9337-02
5.4 ± 0.2 4.7 ± 0.1 3.0 ± 0.1 3.6 ± 0.2 13.5 2.54 ± 0.2
KLEDA0093EA
1.12 ± 0.1
0.45 ± 0.05 Lead 2.54 ± 0.2
13.5 ± 1
4.5 ± 0.2 0.45 Lead 2.54 ± 0.2
13.5
6.65 ± 0.2
0.45 Lead
Common to case
KLEDA0081EA
Common to case
Common to case
KLEDA0092EA
Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. Type numbers of products listed in the specification sheets or supplied as samples may have a suffix “(X)” which means tentative specifications or a suffix “(Z)” which means developmental specifications. ©2010 Hamamatsu Photonics K.K.
www.hamamatsu.com
HAMAMATSU PHOTONICS K.K., Solid State Division 1126-1 Ichino-cho, Higashi-ku, Hamamatsu City, 435-8558 Japan, Telephone: (81) 53-434-3311, Fax: (81) 53-434-5184
U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P.O.Box 6910, Bridgewater, N.J. 08807-0910, U.S.A., Telephone: (1) 908-231-0960, Fax: (1) 908-231-1218 Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49) 8152-375-0, Fax: (49) 8152-265-8 France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: 33-(1) 69 53 71 00, Fax: 33-(1) 69 53 71 10 United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44) 1707-294888, Fax: (44) 1707-325777 North Europe: Hamamatsu Photonics Norden AB: Smidesvägen 12, SE-171 41 Solna, Sweden, Telephone: (46) 8-509-031-00, Fax: (46) 8-509-031-01 Italy: Hamamatsu Photonics Italia S.R.L.: Strada della Moia, 1 int. 6, 20020 Arese, (Milano), Italy, Telephone: (39) 02-935-81-733, Fax: (39) 02-935-81-741
Cat. No. KLED1043E02 Aug. 2010 DN
4