S11155-2048

Driver circuit for CCD image sensor C11165 Driver circuit for CCD image sensor (S11155/S11156-2048) The C11165 is a driver circuit designed for HAMAMATSU CCD image sensor S11155/S11156-2048. The C11165 can be used in spectrometers when combined with the S11155/S11156-2048. The C11165 holds a CCD driver circuit, analog video signal processing circuit (16-bit A/D converter), timing generator, control circuit and power supply. The C11165 converts analog video signals from a CCD into digital signals and outputs them. The USB connector (USB 2.0) provided as a standard feature easily connects to a PC for the C11165 control and data acquisition. The C11165 also has a BNC connector for external trigger input and pulse output. The C11165 is compact, lightweight and very easy to handle. Application software (DCam-USB) that comes with the C11165 allows easy operation from a PC running on Windows 2000/XP. A function library (DCamUSB.DDL) included with the application software helps you to develop your own software. This software is available with DLL to help you develop your own software programs under various developmental environments. Features Built-in 16-bit A/D converter Adjustable offset Adjustable gain Interface of computer: USB 2.0 Power supply: DC+5 V Applications Spectrometer Control of CCD image sensor (S11155/S11156-2048) and data aquisition The table below shows CCD image sensor applicable for the C11165. Since the C11165 does not include a CCD image sensor, so select the desired sensor and order it separately. Type no. C11165 Type no. S11155-2048 S11156-2048 Number of pixels 2068 × 1 CCD area image sensor Number of active pixels 2048 × 1 Pixel size (μm) 14 × 500 14 × 1000 Active area [mm (H) × mm (V)] 28.672 × 0.500 28.672 × 1.000 Absolute maximum ratings Parameter Supply voltage Operating temperature* Storage temperature* Operating humidity* * No condensation Symbol Topr Tstg Condition Ta=25 °C Value +7 0 to +50 -20 to +70 70 max. Unit V °C °C % www.hamamatsu.com 1 Driver circuit for CCD image sensor C11165 Specifications (Typ. Ta=25 °C, unless otherwise noted) Parameter Scanning Line readout time Data transfer time Total transfer time A/D conversion resolution Conversion gain Readout noise Dynamic range Interface Supply voltage Dimension Weight Condition Specification 6 Unit MHz μs μs μs bit e-/ADU ADU V mm g 377.5 344.67 722.17 65535ADU Gain=1 16 3.6 12 5461 USB 2.0 DC + 4.5 to 5.5 80 (H) × 80 (W) Approx. 65 950 mA typ. Functions Parameter Suspend mode (LED-off) Operating Standby mode (LED-white) mode setting Data transfer mode (LED-green, aqua, blue) Internal synchronous mode ("INT" mode) Selectable External synchronous mode 1 data ("EXT.EDGE" mode) acquisition modes External synchronous mode 2 ("EXT.LEVEL" mode) Gain adjustment Offset adjustment Pulse output signal setting Specification The power supply is turned off. It is Standby state, in which the data acquisition is possible. In this mode, the driver circuit sends the data to PC. Data is acquired on the basis of the trigger timing generated by application software. Data is acquired in synchronization with the external trigger signal input from the BNC connector. In synchronization with an edge of the external trigger signal, data is accumulated for the set integration time and is then output. Data is acquired in synchronization with the external trigger signal input from the BNC connector. Data is accumulated for a period equal to the pulse width of the external trigger signal and is then output. The gain value can be varied in the range of “1 to 10” with the step of 1. Default value is "1". The offset value can be varied in the range of “0 to 1020” with the step of 4. Default value is "40". It is possible to set the timing of the pulse output signal that is output from the “BNC connector for pulse output” of the driver circuit. 2 Driver circuit for CCD image sensor C11165 Timing chart Internal synchronous mode (“INT” mode) Non-MPP operation Trigger in (software) Exposure time Exposure signal REGH/REGL ARG TG P1H/P2H Data acquisition time A/D conversion Line readout time Data transfer time Data transfer Total transfer time KACCC0528EA MPP operation Trigger in (software) Exposure time Exposure signal REGH/REGL ARG TG P1H/P2H Data acquisition time A/D conversion Line readout time Data transfer time Data transfer Total transfer time KACCC0529EA 3 Driver circuit for CCD image sensor C11165 External synchronous mode 1 (“EXT.EDGE” mode) Non-MPP operation Trigger in (from BNC) Exposure time Exposure signal REGH/REGL ARG TG P1H/P2H Data acquisition time A/D conversion Line readout time Data transfer time Data transfer Total transfer time KACCC0530EA MPP operation Trigger in (from BNC) Exposure time Exposure signal REGH/REGL ARG TG P1H/P2H Data acquisition time A/D conversion Line readout time Data transfer time Data transfer Total transfer time KACCC0531EA 4 Driver circuit for CCD image sensor C11165 External synchronous mode 2 (“EXT.LEVEL” mode) Non-MPP operation Trigger in (from BNC) Exposure time Exposure signal REGH/REGL ARG TG P1H/P2H Data acquisition time A/D conversion Line readout time Data transfer time Data transfer Total transfer time KACCC0532EA MPP operation Trigger in (from BNC) Exposure time Exposure signal REGH/REGL ARG TG P1H/P2H Data acquisition time A/D conversion Line readout time Data transfer time Data transfer Total transfer time KACCC0533EA 5 Driver circuit for CCD image sensor C11165 Dimensional outline (unit: mm) 45.4 8.8 4.6 35 BNC connector for pulse output (4 ×) 3.2 5.0 BNC connector for external trigger input USB connector 80 DC jack 5.0 Image sensor (optional) 23 14.4 5.0 80 5.0 3.1 1.6 13 CCD image sensor mount position 16.5 35 45 29.5 50.5 Index mark KACCC0271EB 6 Driver circuit for CCD image sensor C11165 Connection examples Refer to the following diagram to connect hardware peripherals. Laser Mechanical shutter Pulse generator USB 2.0 DC +5 V C11165 PC KACCC0527EA Accessories · CD-ROM (includes C11165 instruction manual, application software, SDK) · USB cable · AC adapter Related information CCD linear image sensors S11155-2048, S11156-2048 http://jp.hamamatsu.com/resources/products/ssd/pdf/s11155-2048_etc_kmpd1118e03.pdf Characteristics and use of resistive gate type CCD linear image sensors with electronic shutter http://jp.hamamatsu.com/sp/ssd/CCD_e.html Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. Type numbers of products listed in the specification sheets or supplied as samples may have a suffix “(X)” which means tentative specifications or a suffix “(Z)” which means developmental specifications. ©2010 Hamamatsu Photonics K.K. www.hamamatsu.com HAMAMATSU PHOTONICS K.K., Solid State Division 1126-1 Ichino-cho, Higashi-ku, Hamamatsu City, 435-8558 Japan, Telephone: (81) 53-434-3311, Fax: (81) 53-434-5184 U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P.O.Box 6910, Bridgewater, N.J. 08807-0910, U.S.A., Telephone: (1) 908-231-0960, Fax: (1) 908-231-1218 Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49) 8152-375-0, Fax: (49) 8152-265-8 France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: 33-(1) 69 53 71 00, Fax: 33-(1) 69 53 71 10 United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44) 1707-294888, Fax: (44) 1707-325777 North Europe: Hamamatsu Photonics Norden AB: Smidesvägen 12, SE-171 41 Solna, Sweden, Telephone: (46) 8-509-031-00, Fax: (46) 8-509-031-01 Italy: Hamamatsu Photonics Italia S.R.L.: Strada della Moia, 1 int. 6, 20020 Arese, (Milano), Italy, Telephone: (39) 02-935-81-733, Fax: (39) 02-935-81-741 Cat. No. KACC1178E01 Aug. 2010 DN 7