0213005.MRET1P

Fuse Datasheet 213 Series 5×20 mm, Time-Lag Fuse RoHS Pb PS E Description The 213 Series is a 5x20mm time-lag, surge-withstand, glass body cartridge fuse that is designed to IEC specifications. Features & Benefits ■ Conforms to EN/IEC/K/J 60127-1 and EN/IEC/K/J 60127-2 ■ Recognized to UL/CSA/NMX 248-1 and UL/CSA/NMX 24814 ■ Available in cartridge and axial lead form ■ Conforms to GB 9364.1 and GB 9364.2 ■ Meets the IEC 60127-2, Sheet 3 specification for time-Lag fuses ■ CE Mark indicates compliance with Low-Voltage and RoHS Directives. ■ RoHS compliant and lead-free. Additional Information Applications Used as supplementary protection in appliance or utilization equipment to provide individual protection for components or internal circuits. Resources Accessories Agency Approvals Samples Agency Electrical Characteristic for Series % of Ampere Rating PS E Ampere Rating Opening Time All Ratings 60 minutes, Minimum 2 minutes, Maximum 0.6 sec., Min.; 10 sec. Max. .15 sec., Min.; 3 sec. Max. 0.02 sec., Min.; 0.3 sec. Max. 150% 210% 275% 400% 1000% Agency File Number Ampere Range 1A-5A 6.3A 1A-5A 6.3A 0.200A – 6.3A Cartridge: NBK090205-E10480A NBK120802-E10480C Leaded: NBK090205-E10480B NBK120802-E10480D 2020970207000056 E10480 029862 1914693 40015638 KM41462 SU05001-12002 SU05001-12001 N/A 0.200A – 6.3A 0.200A – 6.3A 3.15A-5A 6.3A 0.200A – 6.3A Electrical Characteristic Specifications by Item Amp Code Ampere Rating Voltage Rating (V) 0.2 0.25 0.315 0.4 0.5 0.63 0.8 1.0 1.25 1.6 2.0 2.5 3.15 4.0 5.0 6.3 0.2 0.25 0.315 0.4 0.5 0.63 0.8 1 1.25 1.6 2 2.5 3.15 4 5 6.3 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 Interrupting Rating 35A@250Vac 40A@250Vac 50A@250Vac 63A@250Vac Nominal Cold Resistance (Ohms) Nominal Melting I2t (A2 sec) Maximum Voltage Drop at Rated Current(mV) Maximum Power Dissipation at 1.5ln (W) 1.6000 1.0495 0.8475 0.5350 0.3700 0.2750 0.1635 0.1165 0.0817 0.0551 0.0452 0.0305 0.0231 0.0170 0.0116 0.0095 0.22500 0.55500 1.14000 1.36000 2.90500 4.80000 9.42000 19.20000 27.15000 44.20000 92.70500 138.00000 202.00000 226.50500 314.00000 600.00000 1500 1300 1100 1000 900 300 250 150 150 150 150 120 100 100 100 100 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1 Agency Approvals PS E x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 11/06/20 Fuse Datasheet 213 Series 5×20 mm, Time-Lag Fuse Average Time Current Curves 0.200A 0.250A 0.315A 0.400A 0.500A 0.630A 0.800A 1A 1.25A 1.6A 2A 2.5A 3.15A 4A 5A 6.3A Temperature Re-rating Curve 10000 1000 TIME IN SECONDS 100 10 1 0.1 0.01 0.001 0.1 1 100 10 1000 CURRENT IN AMPERES Soldering Parameters - Wave Soldering Recommended Process Parameters: 280 Wave Parameter 260 240 Preheat: 220 (Depends on Flux Activation Temperature) 200 180 160 140 120 100 80 60 40 (Typical Industry Recommendation) Temperature Minimum: 100° C Temperature Maximum: 150° C Preheat Time: 60-180 seconds Solder Pot Temperature: 260° C Maximum Solder Dwell Time: 2-5 seconds Solder Iron Temperature: 350° C +/- 5°C Heating Time: 5 seconds max. Time (Seconds) Cooling Time Preheat Time Lead-Free Recommendation Recommended Hand-Solder Parameters: 240 230 220 210 200 190 180 170 160 150 140 130 120 110 90 100 80 70 60 50 40 30 0 0 20 20 10 Temperature (°C) - Measured on bottom side of board 300 Dwell Time Note: These devices are not recommended for IR or Convection Reflow process. 2 © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 11/06/20 Fuse Datasheet 213 Series 5×20 mm, Time-Lag Fuse Product Characteristics Terminal Strength Body: Glass Cap: Nickel–plated brass Leads: Tin–plated Copper MIL-STD-202, Method 211, Test Condition A Solderability MIL-STD-202, Method 208 Material Product Marking Packaging Operating Temperature –55ºC to +125ºC Thermal Shock MIL-STD-202, Method 107, Test Condition B: (5 cycles –65°C to +125°C) Cap1: Brand logo, current and voltage Cap2: Agency approval marks Series Available in Bulk (M=1000 pcs/pkg) or on Tape/Reel (MRET1=1000 pcs/reel) Humidity Salt Spray Dimensions Part Numbering System 20±0.5 0213 000P 5.1±0.6 0213 000 XEP Note: - All dimensions in mm 0213 xxxx M X E P 5.2+0.1 -0.2 5.1±0.6 21.5±1.0 40±1.0 MIL-STD-202, Method 201 MIL-STD-202, Method 103, Test Condition A. High RH (95%) and elevated temperature (40°C) for 240 hours. MIL-STD-202, Method 101, Test Condition B Vibration 5.5±0.3 Series Lead-free Amp Code Option Codes Refer to Amp Code column of Electrical Characteristics Table 0.65±0.05* Blank : Cartidge Type Fuse E : Axial Leaded Fuse Quantity Code Packaging Code M = 1000 X = Filler Packaging Packaging Option Packaging Specification Quantity Quantity & Packaging Code Taping Width Bulk N/A 1000 Bulk MX N/A N/A 1000 MXE N/A Reel and Tape N/A 1000 MRET1 T1=53mm (2.087”) Bulk N/A 1000 MXG N/A Bulk N/A 1000 MXB N/A Bulk N/A 100 HX N/A 213 Series Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at: www.littelfuse.com/disclaimer-electronics. 3 © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 11/06/20