0215008.MXK9SPP

Axial Lead & Cartridge Fuses 5×20 mm > Time-Lag Fuse > 215SP Series 215SP Series, 5×20 mm, Time-Lag Fuse RoHS Pb PS E Description The 215SP Series is a 5x20m Time-lag, surge withstanding ceramic body, axial-leaded cartridge fuse designed to IEC specifications. Features • High breaking capacity • RoHS compliant and lead-free Applications Agency Approvals Agency PS E Agency File Number Ampire Range NBK080205-E10480B NBK250702-E10480F CCC self-declaration No.: 2020970207000048 SU05001-2011B SU05001-10001 SU05001-10002 SU05001-2012B 1A – 5A 6.3A – 10A 1A – 2.5A 3.15A – 6.3A 8A 10A E10480 1A – 10A 29862 1A – 10A Used as supplementary protection in appliance or utilization equipment to provide individual protection for components or internal circuits. 1A - 10A 40013521 1A – 8A J50248091 10A N/A 1A – 10A Electrical Characteristics for Series % of Ampere Rating 210% 275% 400% Additional Information 1000% Datasheet • Meets Standard Sheet 5 of IEC 60127-2 as a TimeLag fuse Ampere Rating Opening Time 1A - 3.15A 30 minutes, Maximum 4A - 6.3A 30 minutes, Maximum 8A - 10A 30 minutes, Maximum 1A - 3.15A 0.75 sec. Min.; 80 secs. Max. 4A - 6.3A 0.75 sec. Min.; 80 secs. Max. 8A - 10A 0.75 sec. Min.; 80 secs. Max. 1A - 3.15A 0.095 sec. Min.; 5 secs. Max. 4A - 6.3A 0.150 sec. Min.; 5 secs. Max. 8A - 10A 0.150 sec. Min.; 5 secs. Max. 1A - 3.15A 0.010 sec. Min.; .150 secs. Max. 4A - 6.3A 0.010 sec. Min.; .150 secs. Max. 8A - 10A 0.010 sec. Min.; .150 secs. Max. Samples Resources Electrical Characteristic Specifications by Item Amp Code Amp Rating Voltage Rating Interrupting Rating** Nominal Resistance Cold Ohms (Ohms) Nominal Melting I2t* (A2 sec) Maximum Voltage Drop at Rated Current (mV) Maximum Power Dissapation at 1.5ln (W) Agency Approvals PS E 001. 1 250 0.1515 1.52000 350 2.5 x x x x x x - x 1.25 1.25 250 0.1074 3.20000 300 2.5 x x x x x x - x 01.6 1.6 250 0.0707 6.83000 200 2.5 x x x x x x - x 002. 2 250 0.0566 11.68000 190 2.5 x x x x x x - x 02.5 2.5 250 0.0386 22.29000 180 2.5 x x x x x x - x 3.15 3.15 250 0.0283 43.25500 140 4 x x x x x x - x 004. 4 250 0.0185 46.96000 100 4 x x x x x x - x 005. 5 250 0.0153 66.09500 100 4 x x x x x x - x 06.3 6.3 250 0.0108 128.75000 100 4 x x x x x x - x 008. 8 250 0.0092 209.88000 100 4 x x x x x x - x 010. 10 250 0.0066 333.56500 100 4 x x x x x - x x 1500 A @ 250 VAC *I2t test at 10x rated current ** Interrupting Rating may differ based on Agency Approval. See Agency Approval certificate for more details. © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 11/05/20 Axial Lead & Cartridge Fuses 5×20 mm > Time-Lag Fuse > 215SP Series Average Time Current Curves 1 1.25 1.6 2 2.5 3.15 4 5 6.3 8 10 Temperature Re-rating Curve 10000 1000 100 Time (seconds) 10 1 0.1 0.01 0.001 0.01 0.1 1 10 100 Amps Soldering Parameters - Wave Soldering Recommended Process Parameters: 300 Wave Parameter 280 Lead-Free Recommendation Preheat: 240 (Depends on Flux Activation Temperature) 220 200 180 160 140 (Typical Industry Recommendation) Temperature Minimum: 100°C Temperature Maximum: 150°C Preheat Time: 60-180 seconds 120 100 80 60 40 Solder Pot Temperature: 260°C Maximum Solder Dwell Time: 2-5 seconds Recommended Hand-Solder Parameters: 20 Time (Seconds) Cooling Time Preheat Time 240 230 220 210 200 190 180 170 160 150 140 130 120 110 90 100 80 70 60 50 40 30 20 0 0 10 Temperature (°C) - Measured on bottom side of board 260 Solder Iron Temperature: 350°C +/- 5°C Heating Time: 5 seconds max. Note: These devices are not recommended for IR or Convection Reflow process. Dwell Time A Different values of A and B available, please contact the Littelfuse sales representative in your region: For the pigtailed fuse, please follow the recommendations B A below for axial lead forming and mounting into PCB: Lead forming: C The distance C between cap flat surface and axial lead shall be greater than 1.0 mm. PCB mounting: C The distance between PCB and fuse cap is recommended to be a minimum of 1.5 mm. B © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 11/05/20 Axial Lead & Cartridge Fuses 5×20 mm > Time-Lag Fuse > 215SP Series Product Characteristics Materials Terminal Strength Solderability Product Marking Operating Temperature Part Numbering System Body: Ceramic Cap: Nickel–plated Brass Leads: Tin–plated Copper MIL-STD-202, Method 211, Test Condition A MIL-STD-202 Method 208 Cap 1: Brand logo, current and voltage ratings Cap 2: Agency approval marks MIL-STD-202, Method 107, Test Condition B (5 cycles, –65ºC to +125ºC) MIL-STD-202, Method 201 MIL-STD-202, Method 103, Test Condition A (High RH (95%) and elevated temp (40ºC) for 240 hours) MIL-STD-202, Method 101, Test Condition B Vibration Humidity Salt Spray Dimensions Lead-Free Current Rating Code Single-Cap Pigtail Refer to Amp Code column of Electrical Characteristics Table Option Codes E M = 1000 : Axial Leaded Fuse Packaging Code X = Filler Packaging All dimensions in mm 40 ± 1.0 Series Quantity Code –55ºC to +125ºC Thermal Shock 0215 xxxx M X E SP P 20 ± 0.5 Packaging Option Packaging Specification Bulk N/A +0.1 ø5.2 -0.2 Quantity Packaging Code Reel Size MXE N/A 215SP Series 1000 ø0.65±0.05* 5.1 ± 0.6 5.1 ± 0.6 Notes: * Ratings 8A and 10A have 0.8 ± 0.05 diameter lead. Disclaimer Notice - Littelfuse products are not designed for, and shall not be used for, any purpose (including, without limitation, automotive, military, aerospace, medical, life-saving, life-sustaining or nuclear facility applications, devices intended for surgical implant into the body, or any other application in which the failure or lack of desired operation of the product may result in personal injury, death, or property damage) other than those expressly set forth in applicable Littelfuse product documentation. Warranties granted by Littelfuse shall be deemed void for products used for any purpose not expressly set forth in applicable Littelfuse documentation. Littelfuse shall not be liable for any claims or damages arising out of products used in applications not expressly intended by Littelfuse as set forth in applicable Littelfuse documentation. The sale and use of Littelfuse products is subject to Littelfuse Terms and Conditions of Sale, unless otherwise agreed by Littelfuse. Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at www.littelfuse.com/disclaimer-electronics. © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 11/05/20