021502.5MXE

Axial Lead and Cartridge Fuses Designed to IEC Standard 5 x 20 mm Time Lag Fuse (Slo-Blo ® Fuse) 215 Series ® D ® V E • Designed to International (IEC) Standards for use globally. • Meets the IEC 60127-2, Sheet 5 specification for Time Lag Fuses. • Available in Cartridge and Axial Lead Form. • Available in ratings of .2 to 12 amperes. • High breaking capacity. ELECTRICAL CHARACTERISTICS: % of Ampere Rating 150% 210% 275% 400% 1000% Ampere Rating .1-6.3 8-12 Opening Time 60 minutes, Minimum 30 minutes, Minimum .1-12 30 minutes, Maximum .1-.8 1-12 .1-.8 1– 3.15 4– 6.3 .1-.8 1-12 .25 sec., Min.; 80 sec. Max. .75 sec., Min.; 80 sec. Max. .05 sec., Min.; 5 sec. Max. .095 sec., Min.; 5 sec. Max. .150 sec., Min.; 5 sec. Max. .005 sec., Min.; .15 sec., Max. .010 sec., Min.; .15 sec., Max. 215 000 .65* (.026") 5.2 (.205") AGENCY APPROVALS: Sheet V IEC 60127-2:* SEMKO approved 1A-6.3A. BSI approved 1-6.3A. VDE approved 1A-12A. METI approved 1-12A. Recognized under the Components Program of Underwriters Laboratories and recognized by CSA from 0.5A-12A. K Mark approved 1A-12A. 20 (.787) 6.0 MAX (.236") 22.5 MAX (.886) 40 (1.58) *Ratings above 6.3A have 0.8 dia lead Average Time Current Curves 1A 1.25A 1.6A 2A 2.5A 3.15A 4A 5A 6.3A 8A 10A 12A INTERRUPTING RATING: 1500 amperes @ 250VAC, 0.7-0.8 power factor. 215 000 XE ORDERING INFORMATION: 100 Voltage Rating 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 Nominal Resistance Cold Ohms 1.750 1.170 0.873 0.560 1.080 0.660 0.436 0.110 0.085 0.0588 0.043 0.0312 0.0220 0.0163 0.0125 0.0099 0.0078 0.0060 0.0055 Nominal Melting I2t A2 Sec. 0.37 0.56 1.08 1.45 0.34 0.56 0.954 1.05 2.05 3.90 6.95 10.65 21.2 38.7 82.85 132.5 209.5 360.5 515.0 *IEC Standards for 5 x 20mm fuses do not include ratings above 6.3 amperes, but are under consideration. IEC 60127-2, Sheet 5 does not include ratings below 1 ampere (under consideration by IEC). 10 11 1 AXIAL LEAD AND CARTRIDGE FUSES Ampere Rating .200* .250* .315* .400* .500* .630* .800* 1 1.25 1.6 2 2.5 3.15 4 5 6.3 8* 10* 12* TIME IN SECONDS Cartridge Catalog Number 215.200 215.250 215.315 215.400 215.500 215.630 215.800 215 001 215 1.25 215 01.6 215 002 215 02.5 215 3.15 215 004 215 005 215 06.3 215 008 215 010 215 012 0.1 0.01 0.001 0.05 0.1 w w w. l i t t e l f u s e . c o m 1 10 CURRENT IN AMPERES 100 500 403