0218002.MXF5P

Axial Lead & Cartridge Fuses 5×20 mm > Time-Lag > 218 Series 218 Series, 5×20 mm, Time-Lag Fuse RoHS Pb PS E Description The 218 series fuse is a 5x20mm time-lag glass body cartridge fuse designed to IEC specification. Features • Designed to International IEC Standards for use globally • Meets the IEC 60127-2, Sheet 3 specification for Time-Lag fuses Agency Approvals • Available in cartridge and axial lead form • RoHS compliant and lead-free Applications Agency Agency File Number PS E Cartridge: NBK090205-E10480A NBK120802-E10480C Leaded: NBK090205-E10480B NBK120802-E10480D Ampere Range 1A – 5A 6.3A – 15A 1A – 5A 6.3A – 15A 2020970207000065 0.032A – 6.3A SU05001-3005 SU05001-2008 SU05001-2009 0.032A – 0.040A 0.050A – 0.800A 1A – 10A E10480 0.032A – 16A 29862 0.032A - 10A; 15A 1620064 0.032A – 6.3A 40013496 0.032A – 10A Used as supplementary protection in appliance or utilization equipment to provide individual protection for components or internal circuits. Additional Information Datasheet Resources Accessories For recommended fuse accessories for this product series, see ‘Recommended Accessories’ section. 40016604 15A* KM41462 0.080A – 6.3A Electrical Characteristics N/A 0.032A – 16A % of Ampere Rating * - Approval for Cartridge versions only Samples 150% 210% 275% 400% 1000% Ampere Rating Opening Time 0.032A - 0.100A 60 minutes, Minimum 0.125A - 6.3A 60 minutes, Minimum 8A - 16A 30 minutes, Minimum 0.032A - 0.100A 120 sec., Maximum 0.125A - 6.3A 120 sec., Maximum 8A - 16A 120 sec., Maximum 0.032A - 0.100A 200 ms., Min.; 10 sec. Max. 0.125A - 6.3A 600 ms., Min.; 10 sec. Max. 8A - 16A 600 ms., Min.; 10 sec. Max. 0.032A - 0.100A 40 ms., Min.; 3 sec. Max. 0.125A - 6.3A 150 ms., Min.; 3 sec. Max. 8A - 16A 150 ms., Min.; 3 sec. Max. 0.032A - 0.100A 10 ms., Min.; 300 ms. Max. 0.125A - 6.3A 20 ms., Min.; 300 ms. Max. 8A - 16A 20 ms., Min.; 300 ms. Max. © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: BA.08/26/20 Axial Lead & Cartridge Fuses 5×20 mm > Time-Lag > 218 Series Electrical Characteristics Amp Code .032 .040 .050 .063 .080 .100 .125 .160 .200 .250 .315 .400 .500 .630 .800 001. 1.25 01.6 002. 02.5 3.15 004. 005. 06.3 008. 010. 12.5 015. 016. Amp Voltage Rating Rating (A) (V) 0.032 0.04 0.05 0.063 0.08 0.1 0.125 0.16 0.2 0.25 0.315 0.4 0.5 0.63 0.8 1 1.25 1.6 2 2.5 3.15 4 5 6.3 8 10 12.5 15 16 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 Interrupting Rating 35 A @ 250 VAC 40 A @ 250 VAC 50 A @ 250 VAC 63 A @ 250 VAC 80 A @ 250 VAC 100 A @ 250 VAC 63 A @ 250 VAC 100 A @ 250 VAC 63 A @ 250 VAC Maximum Maximum Nominal Cold Nominal Voltage Drop Power Resistance Melting at Rated Dissipation (Ohms) I2t (A2 sec) Current (mV) At 1.5ln(W) 48.258 0.011 5000 1.6 31.862 0.011 4000 1.6 21.292 0.027 3500 1.6 14.268 0.046 3000 1.6 9.07 0.075 2500 1.6 6.018 0.079 2000 1.6 4.2 0.1465 1900 1.6 3.7 0.144 1500 1.6 1.6 0.341 1300 1.6 1.0495 0.5405 1100 1.6 0.8475 1.11 1000 1.6 0.535 1.325 900 1.6 0.37 2.825 300 1.6 0.275 4.675 250 1.6 0.0813 3.37 150 1.6 0.0613 6.73 150 1.6 0.0446 12.65 150 1.6 0.0336 23.35 150 1.6 0.0293 14.45 150 1.6 0.0219 23.25 120 1.6 0.0173 38.15 100 1.6 0.0129 69.1 100 1.6 0.0104 111.0 100 1.6 0.0076 198.5 100 1.6 0.0059 341.5 100 4 0.0045 568.0 100 4 0.0034 889.0 100 4 0.0028 1405.00 100 4 0.0021 1955.00 100 4 Agency Approvals PS E x x x x x x x x x x x x x x x x x x x x - x x x x x x x x x x x x x x x x x x x x x x x x x x - x x x x x x x x x x x x x x x x x x x x x x x x - x x x x x x x x x x x x x - x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x - x x x x x x x x x x x x x x x x x x x x x x x x - x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x* - * - Approval for cartidge versions only 0.032A 0.040A 0.050A 0.063A 0.080A 0.100A 0.125A 0.160A 0.200A 0.250A 0.315A 0.400A 0.500A 0.630A 0.800A 1A 1.25A 1.6A 2A 2.5A 3.15A 4A 5A 6.3A 8A 10A 12.5A 15A 16A Average Time Current Curves 10000 1000 100 TIME IN SECONDS Temperature Re-rating Curve 10 1 0.1 0.01 0.01 0.1 1 10 100 CURRENT IN AMPERES © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: BA.08/26/20 Axial Lead & Cartridge Fuses 5×20 mm > Time-Lag > 218 Series Soldering Parameters - Wave Soldering Recommended Process Parameters: 280 Wave Parameter 260 240 Preheat: 220 Lead-Free Recommendation (Depends on Flux Activation Temperature) 200 180 160 140 120 100 80 60 (Typical Industry Recommendation) Temperature Minimum: 100°C Temperature Maximum: 150°C Preheat Time: 60-180 seconds Solder Pot Temperature: 260°C Maximum Solder Dwell Time: 2-5 seconds Recommended Hand-Solder Parameters: Solder Iron Temperature: 350°C +/- 5°C Heating Time: 5 seconds max. Note: These devices are not recommended for IR or Convection Reflow process. 40 240 230 220 210 200 190 180 170 160 150 140 130 120 110 90 100 80 70 60 50 40 30 0 0 20 20 10 Temperature (°C) - Measured on bottom side of board 300 Time (Seconds) Cooling Time Preheat Time Dwell Time Product Characteristics Terminal Strength Body: Glass Cap: Nickel–plated Brass Leads: Tin–plated Copper MIL-STD-202, Method 211, Test Condition A Solderability MIL-STD-202, Method 208 Product Marking Cap1: Brand logo, current and voltage ratings Cap2: Agency approval marks Packaging Available in Bulk (M=1000 pcs/pkg) or on Tape/Reel (MRET1=1000 pcs/reel) Material Operating Temperature Thermal Shock Vibration –55ºC to +125ºC MIL-STD-202, Method 107, Test Condition B (5 cycles, –65°C to +125°C) MIL-STD-202, Method 201 Humidity MIL-STD-202, Method 103, Test Condition A (High RH (95%) and elevated temperature (40°C) for 240 hours) Salt Spray MIL-STD-202, Method 101, Test Condition B © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: BA.08/26/20 Axial Lead & Cartridge Fuses 5×20 mm > Time-Lag > 218 Series Dimensions Part Numbering System 0218 xxxx M X E P 20+0.5 5.2+0.1 -0.2 0218 000P 5.1+0.6 Amp Code Refer to Amp Code column of Electrical Characteristics Table 5.6±0.4 21.5±1.0 40±1.0 0218.032 XEP to Series 5.1+0.6 Quantity Code 0218.100XEP M = 1000 0.65±0.05 Packaging Code X = Filler 0218016. XEP Option Codes 5.5±0.3 21.5±1.0 40±1.0 0218.125 XEP to Blank : Cartidge Type Fuse E : Axial Lead Fuse See Notes* Notes: * 0.032A-6.3A have 0.65±0.05 diameter lead. 8A-16A have 0.8±0.05 diameter lead. Lead-free All dimensions in mm Packaging Packaging Option Packaging Specification Quantity Quantity & Packaging Code Taping Width 218 Series Bulk N/A 1000 MX N/A Bulk N/A 1000 MXE N/A Reel and Tape EIA 296-E 1000 MRET1 T1=53mm (2.087”) Bulk N/A 1000 MXG N/A Bulk N/A 1000 MXB N/A Bulk N/A 100 HX N/A Recommended Accessories Accessory Type Series 345_ISF Holder Block Max Application Voltage Panel Mount Shock-Safe Fuseholder Max Application Amperage 20 345 Shock-Safe Fuseholder with PC Mount, Solder Mount and Panel Mount options 20 830 PC Mount Shock-Safe Miniature Fuseholder 16 520 Metric OMNI-BLOK® Fuse Block 646 PC Mount Miniature Fuse Block 658 Surface Mount Miniature Fuse Block 10 PC Mount Miniature Fuse Clip 6.3 111 PC Board Mount Fuse Clip 10 445 PC Board Mount Fuse Clip 10 520_W Clip Description 10 250 6.3 Notes: 1. Do not use in applications above rating. 2. Please refer to fuseholder data sheet for specific re-rating information. 3. Please contact factory for applications greater than the max voltage and amperage shown. Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at: www.littelfuse.com/disclaimer-electronics. © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: BA.08/26/20