02200007MXP

Axial Lead & Cartridge Fuses 2AG > Special Fuse > 220 Series 220 Series, Lead-Free 2AG Special Fuse RoHS Pb PS E ® Description The 220 Series is a 2AG special fuse with various voltage ratings that provide special electric performance as required. Features • RoHS compliant and Lead-free • In accordance with Underwriters Laboratories Standard UL/CSA/NMX 248-14 Agency Approvals Agency Agency File Number E10480 E10480 Ampere Range 0003,0004,0010,0011, 0025,0029,0030,0031,0036 0007,0012,0013,0019, 0044,0045,0059,0060,0061 Cartridge Version NBK200405-E10480A NBK200405-E10480C NBK110512-E10480A NBK190619-E10480A PS E 1A 1.25A - 3.5A 4A - 5A 6A - 7A Axial Leaded Version NBK200405-E10480B NBK200405-E10480D NBK110512-E10480B NBK190619-E10480B ® • Conforms to DENAN’s Appendix 3 • Available in cartridge and axial lead format with various forming dimensions Applications Used as supplementary protection in appliance or utilization equipment to provide individual protection for components or internal circuits. Additional Information 1A 1.25A - 3.5A 4A - 5A 6A - 7A 29862 0003,0004,0007,0010, 0011,0013,0019,0029,0044 N/A 0003-0061 Datasheet Samples Resources Accessories For recommended fuse accessories for this product series, see ‘Recommended Accessories’ section. Electrical Characteristics for Series % of Ampere Rating 100% 135% 200% % of Ampere Rating 100% 135% 200% Amp code Opening Time 0007,0012,0013,0019, 0031,0036,0037,0044, 0054,0060,0061 4 hours, Minimum % of Ampere Rating/ Overload Current 100% 1 hour, Maximum 150% 1 sec., Maximum 0.9A Amp code Opening Time 4 hours, Minimum 0025,0030,0038,0040, 0045,0059 Overload Current 0.6A Amp code Opening Time 0010 15 mins, Maximum 4 hours, Minimum 90 secs., Maximum Amp code Opening Time 0003,0004,0011 90 secs., Maximum Amp code Opening Time 1 hour, Maximum 3 secs., Minimum 20 secs., Maximum Overload Current 0.6A 2A 6A 90 secs., Maximum 0029 2 secs., Maximum 0.5 sec., Maximum © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 01/30/20 Axial Lead & Cartridge Fuses 2AG > Special Fuse > 220 Series Electrical Characteristics Ampere Rating (A) Amp Code Max Voltage Rating (V) 0.35 0003 250 0.35 0004 250 3 0007 350 0.55 0010 250 0.35 0011 250 2 0012 350 5 0013 300 3 0019 350 1.25 0025 250 0.35 0029 250 0.375 0030 250 0.3 0031 250 0.5 0036 300 0.75 0037 300 5 0038 250 0.5 0040 250 1 0044 350 2 0045 350 7 0059 350 0.5 0060 350 0.75 0061 350 Interrupting Rating* 35A@250Vac, 10KA@125Vac 100A@350Vac, 60A@530Vac 35A@250Vac, 10KA@125Vac, 10KA@125Vdc 35A@250Vac, 10KA@125Vac 100A@350Vac 100A@350Vac, 100A@125Vdc 100A@250Vac, 10KA@125Vac, 10KA@125 Vdc 35A@250Vac, 10KA@125Vac 35A@250Vac, 10KA@125Vac, 10KA@125Vdc 35A@300Vac, 10KA@125Vac 50A@250Vac 35A@250Vac, 10KA@125Vac, 10KA@125Vdc 100A@350Vac 100A@250Vac, 100A@350Vac, 10KA@125Vac, 10KA@125Vdc 100A@350Vac / 160A@140Vdc 35A@350Vac Agency Approvals Nominal Cold Resistance (Ohms) Nominal Melting 2 I t (A2 sec) 1.3100 0.490 X - - X X 1.3100 0.490 X - - X X 0.0317 4.62 - X X X X 0.4945 2.04 X - - X X 1.3100 0.49 X - - X 0.0497 1.50 - X X PS E X X 0.0186 17.0 - X X X X 0.0317 4.62 - X X X X 0.1460 15.4 X - X - X 1.3100 0.490 X - - X X 1.1685 0.82 X - - - X 0.5900 0.0300 X - - - X 0.2650 0.365 X - - - X 0.1520 1.05 - - - - X 0.0186 267 - - - - X 0.6935 1.58 - - - - X 0.1027 2.22 - X X X X 0.0698 30.0 - X X - X 0.0116 464 - X X - X 0.2650 0.365 - X - - X 0.1520 1.05 - X - - X Note *: Interrupting Rating may differ based on Agency Approval. See Agency Approval certificate for more details. 100 .250A .375A .500A .750A 1.0A 1.5A 2.0A 2.5A 3A 4A 5A 6A 7A 8A 10A Average Time Current Curves .100A .200A Temperature Re-rating Curve TIME IN SECONDS 10 1 0.1 Note: Rerating depicted in this curve is in addition to the standard derating of 25% for continuous operation. 0.01 0.001 0.1 1 10 100 CURRENT IN AMPERES 1000 © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 01/30/20 Axial Lead & Cartridge Fuses 2AG > Special Fuse > 220 Series Soldering Parameters - Wave Soldering Recommended Process Parameters: 280 260 Wave Parameter 240 Lead-Free Recommendation Preheat: 220 (Depends on Flux Activation Temperature) 200 180 160 140 120 100 80 60 (Typical Industry Recommendation) Temperature Minimum: 100°C Temperature Maximum: 150°C Preheat Time: 60-180 seconds Solder Pot Temperature: 260°C Max. Solder Dwell Time: 2-5 seconds Recommended Hand-Solder Parameters: 40 240 230 220 210 200 190 180 170 160 150 140 130 120 110 90 100 80 70 60 50 40 0 30 0 20 20 10 Temperature (°C) - Measured on bottom side of board 300 Time (Seconds) Note: These devices are not recommended for IR or Convection Reflow process. Cooling Time Preheat Time Solder Iron Temperature: 350°C +/- 5°C Heating Time: 5 seconds max. Dwell Time Product Characteristics Material Terminal Strength Body: Glass Cap: Nickel–plated brass Leads: Tin–plated Copper MIL-STD-202, Method 211, Test Condition A MIL-STD-202 method 208 Cap1: Brand logo, current and voltage ratings Cap2: Series and agency approval marks Solderability Product Marking Operating Temperature Thermal Shock Vibration Humidity Salt Spray Dimensions -55 ºC to +125 ºC MIL-STD-202, Method 107, Test Condition B: (5 cycles - 65ºC to 125ºC) MIL-STD-202, Method 201 MIL-STD-202, Method 103, Test Condition A: High RH (95%) and Elevated Temp (40 ºC) for 240 hours MIL-STD-202, Method 101, Test Condition B Part Numbering System 220 000P Series 4.2 - 4.8 (.16" - .19”) 4.2 - 4.8 (.16" - .19”) 14.1 - 14.9 (.56" - .59”) For 02200029MXP 0220 xxxx M X P .635 ± .06 (.025" ± .002”) 14.1 - 14.9 (.56" - .59”) Length L: 14.1 - 14.9 (.56" - .59”) Series Current Rating Code Length L 1. TYP.38.1±1(1.50”±.04”) 2. 24.8±1(.98”±.04”) 3. 27.8±3(1.09”±.12”) 4. 34.9±1(1.37”±.04”) For MXP For T1 For T2 For T3 Refer to Amp Code Column of Electrical Characteristics Table Quantity Code 4.2 - 4.8 (.16" - .19”) .635 ± .06 (.025" ± .002”) 20 ± 1.5 (.79" ± .059”) For 02200019MXP M = 1000 Package Code 15 ± 1.2 (.591" ± .047”) X = Loose Pack Lead-Free Note: Please contact Littelfuse for other lead length or forming type. Packaging Packaging Option Packaging Specification Quantity Quantity & Packaging Code Reel Size Bulk N/A 1000 MX N/A Bulk N/A 1000 MXSL N/A Reel and Tape EIA 296-E 1000 MRT1 53mm (2.087”) Reel and Tape EIA 296-E 1500 DAT1 53mm (2.087”) Reel and Tape EIA 296-E 1500 DRT1 53mm (2.087”) Reel and Tape EIA 296-E 1500 DRT2 63mm (2.500”) Reel and Tape EIA 296-E 1500 DRT3 73mm (2.874”) Reel and Tape EIA 296-E 2500 ERT1 53mm (2.087”) © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 01/30/20 Axial Lead & Cartridge Fuses 2AG > Special Fuse > 220 Series Recommended Accessories Series Description Max Application Voltage Max Application Amperage 245 Panel Mount Shock-Safe Fuseholder 300 10 150 In-Line Fuseholder 350 10 286 Panel Mount Flip-Top Shock-Safe Fuseholder 250 10 Block 254 OMNI-BLOK® Fuse Block 400 10 Clip 111 PC Board Mount Fuse Clip 250 10 Accessory Type Holder Notes: 1. Do not use in applications above rating. 2. Please refer to fuseholder data sheet for specific re-rating information. 3. Please contact factory for applications greater than the max voltage and amperage shown. Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at: www.littelfuse.com/disclaimer-electronics. © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 01/30/20