0225002.MXP

Axial Lead & Cartridge Fuses 2AG > Fast Acting > 224/225 Series 224/225 Series Lead-Free 2AG, Fast-Acting RoHS PS E Pb Description The 2AG Fast-Acting Fuses are available in cartridge form or with axial leads. 2AG Fuses provide the same performance characteristics as their 3AG counterpart, while occupying one-third the space. Sleeved fuses are available. Features • In accordance with Underwriter’s Laboratories Standard UL 248-14 • Available in cartridge and axial lead form and Agency Approvals Agency PS E Agency File Number Ampere Range E10480 0.375A - 3.5A E10480 4A - 10A 29862 0.375A - 10A NBK200405-E10480A/B/C/D NBK110512-E10480A/B NBK210405-E10480E/F 1A - 3.5A 4A - 5A 6A - 10A N/A 0.375A - 10A with various forming dimensions • RoHS compliant and Lead-free Applications Used as supplementary protection in appliance or utilization equipment to provide individual protection for components or internal circuits. Electrical Characteristics for Series % of Ampere Rating Opening Time 100% 4 hours, Minimum 135% 1 hour, Maximum 200% 1 sec., Maximum Additional Information Datasheet Datasheet Samples Resources Resources 224 Series 224 Series 224 Series 225 Series 225 Series For recommended fuse accessories for this product series, see ‘Recommended Accessories’ section. Samples 225 Series Accessories 224 & 225 Series Electrical Characteristic Specifications by Item Amp Code Ampere Rating (A) Voltage Rating (V) .375 .500 .750 001. 01.5 002. 02.5 003. 03.5 004. 005. 005. 006. 007. 008. 010. 0.375 0.5 0.75 1 1.5 2 2.5 3 3.5 4 5 5 6 7 8 10 250 250 250 250 250 250 250 250 250 125 125 250 125 125 125 125 Interrupting Rating 35A@250Vac 10KA@125Vac 10KA@125Vdc 100A@250Vac 10KA@125Vac 10KA@125Vdc 100A@250Vac 500A@125Vac 500A@125Vac Nominal Cold Resistance (Ohms) 0.3950 0.2650 0.1520 0.1027 0.0712 0.0497 0.0372 0.0317 0.0265 0.0240 0.0186 0.0186 0.0154 0.0130 0.0107 0.0075 Agency Approvals Nominal Melting I2t (A2 sec) 0.171 0.365 1.050 2.220 0.800 2.180 3.820 4.620 6.700 9.400 17.0 17.0 22.1 40.0 56.0 116.0 ® x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x PS E x x x x x x x x x x x x x x x x x x x x x x x x x x x x * 10A with 500A @ 125 Vdc internal breaking capacity testing. © 2016 Littelfuse, Inc. Application testing is strongly recommended. Specifications are subject to change without notice. Revised: 07/26/16 Axial Lead & Cartridge Fuses 2AG > Fast Acting > 224/225 Series Temperature Re-rating Curve .375A .500A .750A 1.00A 1.50A 2.00A 2.50A 3A 4A 5A 6A 7A 8A 10A Average Time Current Curves 100 TIME IN SECONDS 10 1 0.1 Note: Rerating depicted in this curve is in addition to the standard derating of 25% for continuous operation. 0.01 0.001 0.1 1 10 100 CURRENT IN AMPERES 1000 Soldering Parameters - Wave Soldering Recommended Process Parameters: 280 260 Wave Parameter 240 220 Lead-Free Recommendation Preheat: 200 (Depends on Flux Activation Temperature) 180 160 140 120 100 80 60 40 (Typical Industry Recommendation) Temperature Minimum: 100°C Temperature Maximum: Preheat Time: 150°C 60-180 seconds Solder Pot Temperature: 260°C Maximum Solder Dwell Time: 2-5 seconds Time (Seconds) Cooling Time Preheat Time Dwell Time 240 230 220 210 200 190 180 170 160 150 140 130 120 110 90 100 80 70 60 50 40 30 0 0 20 20 10 Temperature (°C) - Measured on bottom side of board 300 Recommended Hand-Solder Parameters: Solder Iron Temperature: 350°C +/- 5°C Heating Time: 5 seconds max. Note: These devices are not recommended for IR or Convection Reflow process. © 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 07/26/16 Axial Lead & Cartridge Fuses 2AG > Fast Acting > 224/225 Series Product Characteristics Body : Glass Cap : Nickel–plated brass Leads: Tin–plated Copper MIL-STD-202, Method 211, Test Condition A Operating Temperature: –55ºC to 125ºC. Thermal Shock: MIL-STD-202, Method 107, Test Condition B (5 Cycles -65ºC to +125ºC). Solderability MIL-STD-202 Method 208 Vibration MIL-STD-202, Method 201 Product Marking Cap1 : Brand logo, current and voltage ratings Cap2 : Series and agency approval marks Humidity MIL-STD-202, Method 103, Test Condition A: High RH (95%) and elevated temp (40ºC) for 240 hours Salt Spray MIL-STD-202, Method 101, Test Condition B Materials Terminal Strength Dimensions Part Numbering System 0224 xxxx M X P 225 000P Series 224 000P Series 4.2 - 4.8 (.16" - .19”) Amp Code .635 ± .06 (.025" ± .002”) 4.2 - 4.8 (.16" - .19”) 14.1 - 14.9 (.56" - .59”) Series 14.1 - 14.9 (.56" - .59”) Refer to Amp Code column of Electrical Characteristics Table Quantity Code 38.1 ± 1 (1.50" ± .04”) TYP. M = 1000 Packaging Code X = Filler Lead-free Note: The ratings from 4A to 10A with MXUP in the suffix Packaging Packaging Specification Quantity Quantity & Packaging Code Taping Width Bulk N/A 1000 MX N/A Bulk N/A 100 HX N/A Reel and Tape EIA 296-E 1500 DRT1 T1=53mm (2.087”) Bulk N/A 1000 MX N/A Bulk N/A 100 HX N/A Packaging Option 224 Series 225 Series Recommended Accessories Series Description Max Application Voltage Max Application Amperage 245 Panel Mount Shock-Safe Fuseholder 300 10 150 In-Line Fuseholder 350 10 286 Panel Mount Flip-Top Shock-Safe Fuseholder 250 10 Block 254 OMNI-BLOK Fuse Block 400 10 Clip 111 PC Board Mount Fuse Clip 250 10 Accessory Type Holder ® Notes: 1. Do not use in applications above rating. 2. Please refer to fuseholder data sheet for specific re-rating information. 3. Please contact factory for applications greater than the max voltage and amperage shown. © 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 07/26/16