0230.500MXP

Axial Lead & Cartridge Fuses 2AG > Time Lag > 229/230 Series 229/230 Series 2AG, Slo-Blo® Fuse with Indicating Option RoHS Pb PS E Description Littelfuse 229/230 series Slo-Blo® Fuses are available in 2AG size cartridge or axial lead form, offer tripped fuse indicating option, and offer features designed to meet rigorous Telecom industry requirements. 229/230 series product ordered with the tripped fuse indicating option show discoloration of the glass body immediately after trip. They offer the same performance characteristics as standard product, and help to reduce time locating the tripped fuse and troubleshooting circuit issues. Agency Approvals Agency PS E Agency File Number Ampere Range E10480 0.250A - 3.5A 29862 0.250A - 7A E10480 4A - 7A NBK200405 - E10480C/D NBK110512 - E10480A/B NBK210405 - E10480E/F 1A - 3.5A 4A - 5A 6A - 7A N/A 0.250A - 7A Electrical Characteristics for Series % of Ampere Rating Opening Time 100% 4 hours, Minimum 135% 1 hour, Maximum 200% 3 seconds, Minimum The 229/230 series 0.25A - 1.25A range combines conventional overcurrent protection with ability to withstand high current, short duration pulses which complies to short circuit requirements of UL 60950 for telephone equipment. Insulating sleeve option is also available. Please refer to the Surge Withstand Specifications section of this document for additional information. Features • Available in cartridge and axial lead form, and a wide range of lead forming dimension and packaging options • Fuses are available for board washable with the additional sealing process (add suffix ‘A’ to part number) • In accordance with UL Standard 248-14 • Sleeved fuse option available (contact Littelfuse for additional information) • RoHS compliant and Lead-free • Tripped fuse indicating option (add suffix ‘S’ to part number) Additional Information 20 seconds, Maximum Datasheet 229 Series Resources 229 Series Samples 229 Series Datasheet 230 Series Resources 230 Series Samples 230 Series Accessories 229 & 230 Series For recommended fuse accessories for this product series, see ‘Recommended Accessories’ section. © 2016 Littelfuse, Inc. Specifications are subject to change without notice. Application testing is strongly recommended. Revised: 06/23/16 Axial Lead & Cartridge Fuses 2AG > Time Lag > 229/230 Series Electrical Characteristic Specification by Item Amp Code Ampere Voltage Rating Rating (A) (V) Interrupting Rating Nominal Melting I2t (A2 sec) 2.4300 1.3100 1.1685 0.6935 0.4805 0.3430 0.3060 0.2120 0.1460 0.1077 0.0698 0.0567 0.0502 0.0383 0.339 0.640 0.820 1.64 1.75 2.95 3.45 5.64 16.8 20.0 30.0 39.0 50.0 77.0 x x x x x x x x x x x x x x x .250 .350 .375 .500 .600 .750 .800 001. 1.25 01.5 002. 2.25 02.5 003. 0.25 0.35 0.375 0.5 0.6 0.75 0.8 1 1.25 1.5 2 2.25 2.5 3 250 250 250 250 250 250 250 250 250 250 250 250 250 250 03.5 3.5 250 100A@250Vac 10KA@125Vac 10KA@125Vdc 0.0312 110.0 004. 005. 006. 007. 4 5 6 7 125 125 125 125 400A@125Vac 400A@125Vdc 0.0258 0.0186 0.0141 0.0116 148.0 267 380 464 35A@250Vac 10KA@125Vac 10KA@125Vdc 80A@310Vac 100A@250Vac 10KA@125Vac 10KA@125Vdc 80A@310Vac Agency Approvals Nominal Cold Resistance (Ohms) PS E x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x Surge Withstand Specificatons Peak Withstand Current(lp): These fuses will withstand 50 repetitions of a double exponential impulse wave having peak currents(lp) and peak voltages as listed. Amp Code Ampere Rating (A) .250 .350 .375 .500 .600 .750 .800 001. 1.25 0.25 0.35 0.375 0.5 0.6 0.75 0.8 1 1.25* Interrupting Rating Nominal Cold Resistance (Ohms) Nominal Melting I2t (A2 sec) 10×160 µs 1500V 10×560 µs 800V 10×1000 µs 1000V 60A@600Vac 40A@600Vac 7A@600Vac 2.2A@600Vac 2.4300 1.3100 1.1685 0.6935 0.4805 0.3430 0.3060 0.2120 0.1460 0.339 0.640 0.820 1.64 1.75 2.95 3.45 5.64 16.8 23.0A 34.0A 40.0A 60.0A 71.0A 91.0A 104.0A 130A 162.0A 16.6A 25.8A 25.4A 37.7A 47.2A 65.5A 68.9A 88.6A 118.1A 12.4A 19.3A 19.0A 28.2A 35.3A 49.0A 51.6A 66.3A 100.0A * 500A peak, 2500V, 2×10 microseconds, 20 repetitions © 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 06/23/16 Axial Lead & Cartridge Fuses 2AG > Time Lag > 229/230 Series Average Time Current Curves 1000 .250A .375A .500A .750A 1.00A 1.50A 2.0A 2 .5A 3.0A 3.5A 4A 5A 7A Temperature Re-rating Curve TIME IN SECONDS 100 Note: Rerating depicted in this curve is in addition to the industry practice derating of 25% for continuous operation. 10 1 0.1 0.01 0.1 1 10 100 CURRENT IN AMPERES 1000 Soldering Parameters - Wave Soldering Recommended Process Parameters: 280 Wave Parameter 260 240 Lead-Free Recommendation Preheat: 220 (Depends on Flux Activation Temperature) 200 180 160 140 120 100 80 60 (Typical Industry Recommendation) Temperature Minimum: 100°C Temperature Maximum: Preheat Time: 150°C 60-180 seconds Solder Pot Temperature: 260° C Maximum Solder Dwell Time: 2-5 seconds 40 Recommended Hand-Solder Parameters: Time (Seconds) Cooling Time Preheat Time Dwell Time © 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 06/23/16 240 230 220 210 200 190 180 170 160 150 140 130 120 110 90 100 80 70 60 50 40 30 0 0 20 20 10 Temperature (°C) - Measured on bottom side of board 300 Solder Iron Temperature: 350°C +/- 5°C Heating Time: 5 seconds max. Note: These devices are not recommended for IR or Convection Reflow process. Axial Lead & Cartridge Fuses 2AG > Time Lag > 229/230 Series Product Characteristics Body: Glass Cap: Nickel–plated brass Leads: Tin–plated Copper Materials Terminal Strength MIL-STD-202, Method 211, Test Condition A Solderability MIL-STD-202 method 208 Product Marking Cap1: Brand logo, current and voltage ratings Cap2: Series and agency approval marks Dimensions Operating Temperature –55ºC to +125ºC Thermal Shock MIL-STD-202, Method 107, Test Condition B: (5 cycles - -65ºC to 125ºC) Vibration MIL-STD-202, Method 201 Humidity MIL-STD-202, Method 103, Test Condition A: High RH (95%) and Elevated temperature (40ºC) for 240 hours Salt Spray MIL-STD-202, Method 101, Test Condition B Part Numbering System 229 000P Series 0229 xxxx M X P Series 230 000EP 000P Series 4.2 - 4.8 (.16" - .19”) 4.2 - 4.8 (.16" - .19”) 14.1 - 14.9 (.56" - .59”) Series .635 ± .06 (.025" ± .002”) 14.1 - 14.9 (.56" - .59”) Amp Code Refer to Amp Code column of Electrical Characteristics Table 38.1 ± 1 (1.50" ± .04”) TYP. Quantity Code M = 1000 Axial Lead Material: Solder coated Copper. Packaging Code X = Filler Lead-free Recommended Accessories Series Description Max Application Voltage Max Application Amperage 245 Panel Mount Shock-Safe Fuseholder 300 10 150 In-Line Fuseholder 350 10 286 Panel Mount Flip-Top Shock-Safe Fuseholder 250 10 Block 254 OMNI-BLOK Fuse Block 400 10 Clip 111 PC Board Mount Fuse Clip 250 10 Accessory Type Holder ® Notes: 1. Do not use in applications above rating. 2. Please refer to fuseholder data sheet for specific re-rating information. 3. Please contact factory for applications greater than the max voltage and amperage shown. © 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 06/23/16 Axial Lead & Cartridge Fuses 2AG > Time Lag > 229/230 Series Packaging Packaging Specification Quantity Quantity & Packaging Code Taping Width Bulk N/A 5 VX N/A Bulk N/A 5 VXS N/A Bulk N/A 100 HX N/A Bulk N/A 100 HXS N/A Bulk N/A 1000 MX N/A Bulk N/A 1000 MXS N/A Bulk N/A 5 VX N/A Bulk N/A 5 VXS N/A Packaging Option 229 Series 230 Series Bulk N/A 100 HX N/A Bulk N/A 100 HXS N/A Bulk N/A 1000 MX N/A Bulk N/A 1000 MXE N/A Bulk N/A 1000 MXF1 N/A Bulk N/A 1000 MXF16 N/A Bulk N/A 1000 MXF16O N/A Bulk N/A 1000 MXF17 N/A Bulk N/A 1000 MXF17O N/A Bulk N/A 1000 MXF23 N/A Bulk N/A 1000 MXF23O N/A Bulk N/A 1000 MXF32 N/A Bulk N/A 1000 MXO N/A Bulk N/A 1000 MXS N/A Reel and Tape EIA 296-E 1500 DRT2 T2=63mm (2.500”) Reel and Tape EIA 296-E 1500 DRT2S T2=63mm (2.500”) Reel and Tape EIA 296-E 1500 DRT4 N/A Reel and Tape EIA 296-E 2500 ERT2 T2=63mm (2.500”) Reel and Tape EIA 296-E 2500 ERT2S T2=63mm (2.500”) Reel and Tape EIA 296-E 1000 MRT1E T1=53mm (2.087”) Reel and Tape EIA 296-E 1500 DAT1 T1=53mm (2.087”) Reel and Tape EIA 296-E 1500 DAT1O T1=53mm (2.087”) Reel and Tape EIA 296-E 1500 DRT1 T1=53mm (2.087”) Reel and Tape EIA 296-E 1500 DRT1S T1=53mm (2.087”) Reel and Tape EIA 296-E 1500 DRT1SS T1=53mm (2.087”) Reel and Tape EIA 296-E 1500 DRT3 T3=73mm (2.874”) Reel and Tape EIA 296-E 1500 DRT3S T3=73mm (2.874”) Reel and Tape EIA 296-E 2500 ERT1 T1=53mm (2.087”) Reel and Tape EIA 296-E 2500 ERT1S T1=53mm (2.087”) Reel and Tape EIA 296-E 2500 ERT3 T3=73mm (2.874”) Reel and Tape EIA 296-E 2500 ERT3S T3=73mm (2.874”) © 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 06/23/16