0235001.HXE

Axial Lead & Cartridge Fuses 5×20 mm > Time-Lag > 235 Series 235 Series, 5×20 mm, Fast-Acting Fuse RoHS Pb PS E Description 5×20mm fast-acting glass body cartridge fuse designed to UL specification. Features • Designed to UL/CSA/ ANCE 248 Standard • RoHS compliant and lead-free • Available in cartridge and axial lead format Applications Agency Approvals Agency PS E Agency File Number Ampere Range Cartridge: NBK030609-JP1021A NBK190609-JP1021A NBK030609-JP1021B Leaded: NBK030609-JP1021C NBK190609-JP1021B NBK030609-JP1021D 1A - 3.5A 4A -5A 6A -7A SU05001 – 3007 SU05001 – 2002 SU05001 – 2003 0.100A – 0.400A 0.500A – 3A 4A – 6A E10480 1A - 3.5A 4A -5A 6A -7A Used as supplementary protection in appliance or utilization equipment to provide individual protection for components or internal circuits. Electrical Characteristics for Series % of Ampere Rating Ampere Rating 100% 135% Opening Time 4 hours, Minimum 0.100A – 7A 200% 1 hour, Maximum 5 seconds, Maximum 0.100A - 7A 29862 0.100A - 7A N/A 0.100A – 7A Additional Information Datasheet Resources Samples Accessories For recommended fuse accessories for this product series, see ‘Recommended Accessories’ section. © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: BA.08/26/20 Axial Lead & Cartridge Fuses 5×20 mm > Time-Lag > 235 Series Electrical Characteristic Specifications by Item Amp Code Amp Rating (A) Voltage Rating (V) Interrupting Rating Nominal Cold Resistance (Ohms) Agency Approvals Nominal Melting I2t (A2 sec) PS E .100 0.1 250 8.4000 0.00127 x x x - x .125 0.125 250 5.7500 0.00273 x x x - x .200 0.2 250 3.1500 0.00867 x x x - x .250 0.25 250 2.2500 0.01660 x x x - x .300 0.3 250 1.6000 0.03215 x x x - x .400 0.4 250 1.075 0.05845 x x x - x .500 0.5 250 0.4265 0.06915 x x x - x .600 0.6 250 0.3195 0.11200 x x x - x .700 0.7 250 0.2625 0.15600 x x x - x .800 0.8 250 0.1920 0.25300 x x x - x 001. 1 250 0.1530 0.46750 x x x x x 1.25 1.25 250 0.1055 1.08500 x x x x x 01.6 1.6 250 0.0758 2.02500 x x x x x 002. 2 250 0.0603 2.64500 x x x x x 02.5 2.5 250 0.0437 5.44500 x x x x x 003. 3 250 0.0347 8.39500 x x x x x 03.5 3.5 250 0.0331 17.14000 x x - x - 004. 4 125 0.0246 17.14000 x x x x x 005. 5 125 0.0184 27.41000 x x x x x 006. 6 125 0.0148 47.32500 x x x x x 007. 7 125 0.0157 64.81500 x x - x - 100A @ 250VAC 10kA @ 125VAC 10kA @ 125VAC Average Time Current Curves 0.100A 0.125A Temperature Re-rating Curve 0.200A 0.250A 0.300A 0.400A 0.500A 0.600A 0.700A 0.800A 1A 1.25A 1.6A 2A 2.5A 3A 4A 5A 6A 35A @ 250VAC 10kA @ 125VAC 10000 TIME IN SECONDS 1000 100 10 1 0.1 Note: Rerating depicted in this curve is in addition to the standard derating of 25% for continuous operation. 0.01 0.1 1 10 100 1000 CURRENT IN AMPERES Please contact Littelfuse for details on T-C curve for 7A rating © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: BA.08/26/20 Axial Lead & Cartridge Fuses 5×20 mm > Time-Lag > 235 Series Soldering Parameters - Wave Soldering Recommended Process Parameters: Wave Parameter 280 260 Preheat: 240 Lead-Free Recommendation (Depends on Flux Activation Temperature) 220 (Typical Industry Recommendation) 200 Temperature Minimum: 100°C 180 Temperature Maximum: 150°C Preheat Time: 60-180 seconds 160 140 120 Solder Pot Temperature: 260°C Maximum 100 Solder Dwell Time: 2-5 seconds 80 60 40 240 230 220 210 200 190 180 170 160 150 140 130 120 110 90 100 80 70 60 50 40 30 0 0 20 20 10 Temperature (°C) - Measured on bottom side of board 300 Recommended Hand-Solder Parameters: Solder Iron Temperature: 350°C +/- 5°C Heating Time: 5 seconds max. Note: These devices are not recommended for IR or Convection Reflow process. Time (Seconds) Cooling Time Preheat Time Dwell Time Product Characteristics Materials Body: Glass Cap: Nickel–plated brass Leads: Tin–plated Copper Operating Temperature Terminal Strength MIL-STD-202, Method 211. Test Condition A Vibration Solderability MIL-STD-202 Method 208 Cap 1: Brand logo, current and voltage rating Cap 2: Series and agency approval markings Available in Bulk (M=1000 pcs/pkg) or on Tape/Reel (MRET1=1000 pcs/reel) Product Marking Packaging Thermal Shock Humidity Salt Spray –55ºC to +125ºC MIL-STD-202, Method 107, Test Condition B: (5 cycles –65OC + 125OC) MIL-STD-202, Method 201 MIL-STD-202, Method 103, Test Condition A high RH (95%) and elevated temperature (40O C) for 240 hours MIL-STD-202, Method 101, Test Condition B © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: BA.08/26/20 Axial Lead & Cartridge Fuses 5×20 mm > Time-Lag > 235 Series Dimensions Part Numbering System 0235 xxxx M X E P 20+0.5 5.2+0.1 -0.2 0235000P 5.1+0.6 Series Amp Code 5.1+0.6 Refer to Amp Code column of Electrical Characteristics Table 21.5±1.0 40±1.0 0235.100 XEP to 0235.400 XEP Quantity Code 5.6±0.4 M = 1000 Packaging Code X = Filler 0.65±0.05 Option Code E = Axial Leaded 21.5±1.0 40±1.0 0235.500 XEP to 0235007.XEP Lead-free 5.5±0.3 See Notes* All dimensions in mm Notes: * 0.1A-6A have 0.65±0.05 diameter lead. 7A have 0.8±0.05 diameter lead. Packaging Packaging Option Packaging Specification Bulk N/A Bulk N/A Reel and Tape EIA 296-E Quantity & Packaging Code Taping Width 1000 MX N/A 1000 MXE N/A 1000 MRET1 T1=53mm (2.087”) Quantity 235 Series Recommended Accessories Accessory Type Series 345_ISF Holder Block Max Application Voltage Max Application Amperage Panel Mount Shock-Safe Fuseholder 20 345 Shock-Safe Fuseholder with PC Mount, Solder Mount and Panel Mount options 20 830 PC Mount Shock-Safe Miniature Fuseholder 16 520 Metric OMNI-BLOK® Fuse Block 646 PC Mount Miniature Fuse Block 658 10 250 6.3 Surface Mount Miniature Fuse Block 10 PC Mount Miniature Fuse Clip 6.3 111 PC Board Mount Fuse Clip 10 445 PC Board Mount Fuse Clip 10 520_W Clip Description Notes: 1. Do not use in applications above rating. 2. Please refer to fuseholder data sheet for specific re-rating information. 3. Please contact factory for applications greater than the max voltage and amperage shown. Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at: www.littelfuse.com/disclaimer-electronics. © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: BA.08/26/20