0239.300MXP

Axial Lead & Cartridge Fuses 5×20 mm > Slo-Blo® Fuse > 239 Series 239 Series, 5×20 mm, Slo-Blo® Fuse RoHS PS E Pb Description 5×20mm Slo-Blo® glass body cartridge fuse designed to UL specification. Features • Designed to UL/CSA/ ANCE 248-1 and 248-14 Standards • RoHS compliant and lead-free • Available in cartridge and axial lead format Agency Approvals Agency PS E Agency File Number Cartridge: NBK030609-JP1021A NBK190609-JP1021A NBK030609-JP1021B Leaded: NBK030609-JP1021C NBK190609-JP1021B NBK030609-JP1021D SU05001 – 2004A SU05001 – 2014A Applications Ampere Range 1A – 3.5A 4A – 5A 7A 1A – 3.5A 4A – 5A 7A 0.200A – 3.15A 4A – 7A Used as supplementary protection in appliance or utilization equipment to provide individual protection for components or internal circuits. Electrical Characteristics for Series % of Ampere Rating 100% 135% E10480 0.080A – 7A 29862 0.200A – 3.15A 4A – 7A N/A 0.080A – 7A Ampere Ratings Opening Time 4 hours, Minimum All Ratings 200% 1 hour, Maximum 2 minutes, Maximum Additional Information Datasheet Resources Samples Accessories For recommended fuse accessories for this product series, see ‘Recommended Accessories’ section. © 2017 Littelfuse, Inc. Application testing is strongly recommended. Specifications are subject to change without notice. Revised: 01/31/17 Axial Lead & Cartridge Fuses 5×20 mm > Slo-Blo® Fuse > 239 Series Electrical Characteristic Specification by Item Amp Rating Amp Code (A) .080 .100 .125 .150 .200 .250 .300 .400 .500 .600 .700 .750 .800 001. 1.25 01.6 002. 02.5 003. 3.15 03.2 03.5 004. 005. 007. 0.08 0.1 0.125 0.15 0.2 0.25 0.3 0.4 0.5 0.6 0.7 0.75 0.8 1 1.25 1.6 2 2.5 3 3.15 3.2 3.5 4 5 7 Voltage Rating (V) 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 125 125 125 © 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 01/31/17 Interrupting Rating 35A @ 250 VAC 10kA @ 125 VAC 10kA @ 125 VAC 100A @ 250 VAC 10kA @ 125 VAC Nominal Cold Resistance (Ohms) Nominal Melting I2t (A2 sec) 28.1750 17.3425 11.6000 8.1000 3.8725 3.0700 2.3000 1.4750 0.9090 0.6990 0.5375 0.4710 0.4155 0.2965 0.1980 0.1205 0.0943 0.0583 0.04877 0.0414 0.0385 0.0370 0.0312 0.0199 0.0114 0.02500 0.05500 0.08500 0.13000 0.16500 0.34000 0.61500 2.02000 1.98500 2.41500 4.12000 5.42500 7.56500 11.29500 19.52500 30.43000 50.58500 79.70500 129.51000 128.05000 128.05000 128.05000 270.703 302.836 305.758 Agency Approvals PS E x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x Axial Lead & Cartridge Fuses 5×20 mm > Slo-Blo® Fuse > 239 Series Average Time Current Curves 0.200A 0.250A 0.300A 0.400A 0.500A 0.600A 0.700A 0.750A 0.800A 1A 1.25A 1.6A 2A 2.5A 3A 3.15A 4A 5A 7A Temperature Re-rating Curve 10000 1000 TIME IN SECONDS 100 10 1 0.1 Note: Rerating depicted in this curve is in addition to the standard derating of 25% for continuous operation. 0.01 0.001 0.1 1 10 100 1000 CURRENT IN AMPERES Soldering Parameters - Wave Soldering Recommended Process Parameters: 280 Wave Parameter 260 240 Lead-Free Recommendation Preheat: 220 (Depends on Flux Activation Temperature) 200 180 160 140 120 100 60 (Typical Industry Recommendation) Temperature Minimum: 100°C Temperature Maximum: Preheat Time: 150°C 60-180 seconds Solder Pot Temperature: 260°C Maximum Solder Dwell Time: 2-5 seconds 80 40 Recommended Hand-Solder Parameters: Time (Seconds) Cooling Time Preheat Time Dwell Time 240 230 220 210 200 190 180 170 160 150 140 130 120 110 90 100 80 70 60 50 40 30 0 0 20 20 10 Temperature (°C) - Measured on bottom side of board 300 Solder Iron Temperature: 350°C +/- 5°C Heating Time: 5 seconds max. Note: These devices are not recommended for IR or Convection Reflow process. © 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 01/31/17 Axial Lead & Cartridge Fuses 5×20 mm > Slo-Blo® Fuse > 239 Series Product Characteristics Operating Temperature Thermal Shock Materials Body: Glass Cap: Nickel–plated brass Leads: Tin–plated Copper Terminal Strength MIL-STD-202, Method 211, Test Condition A Solderability MIL-STD-202 Method 208 Product Marking Cap 1: Brand logo, current and voltage rating Cap 2: Series and agency approval markings –55ºC to +125ºC MIL-STD-202, Method 107, Test Condition B: (5 cycles –65ºC to +125ºC) MIL-STD-202, Method 201 Vibration Dimensions MIL-STD-202, Method 103, Test Condition A. high RH (95%) and elevated temp (40ºC) for 240 hours MIL-STD-202, Method 101, Test Condition B Humidity Salt Spray Part Numbering System 0239 xxxx M X P 20+0.5 5.2+0.1 -0.2 0239 000P 5.1+0.6 40±1.0 0239 000XEP Series 5.1+0.6 Amp Code Refer to Amp Code column of Electrical Characteristics Table 5.5±0.3 21.5±1.0 Quantity Code M = 1000 0.65±0.05* Packaging Code All dimensions in mm X = Filler Notes: * Ratings above 6.3A have 0.8±0.05 diameter lead. Lead-free Packaging Packaging Option 239 Series Bulk Bulk Reel and Tape Bulk Bulk Bulk Packaging Specification Quantity Quantity & Packaging Code Taping Width N/A N/A EIA 296-E N/A N/A N/A 1000 1000 1000 1000 100 100 MX MXE MRET1 MXB HX HXE N/A N/A T1=52mm (2.062”) N/A N/A N/A Recommended Accessories Accessory Type Holder Block Clip Max Application Voltage Max Application Amperage Series Description 345_ISF Panel Mount Shock-Safe Fuseholder 10 345 Shock-Safe Fuseholder with PC Mount, Solder Mount and Panel Mount options 20 830 PC Mount Shock-Safe Miniature Fuseholder 16 520 Metric OMNI-BLOK® Fuse Block 10 250 646 PC Mount Miniature Fuse Block 658 Surface Mount Miniature Fuse Block 10 520_W PC Mount Miniature Fuse Clip 6.3 111 PC Board Mount Fuse Clip 10 445 PC Board Mount Fuse Clip 10 Notes: 1. Do not use in applications above rating. 2. Please refer to fuseholder data sheet for specific re-rating information. 3. Please contact factory for applications greater than the max voltage and amperage shown. © 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 01/31/17 6.3