0239003.HXP

Axial Lead & Cartridge Fuses 5×20 mm > Slo-Blo® Fuse > 239 Series 239 Series, 5×20 mm, Slo-Blo® Fuse RoHS PS E Pb Description 5×20mm Slo-Blo® glass body cartridge fuse designed to UL specification. Features • Designed to UL/CSA/ ANCE 248-1 and 248-14 Standards • RoHS compliant and lead-free • Available in cartridge and axial lead format Agency Approvals Agency PS E Agency File Number Cartridge: NBK030609-JP1021A NBK190609-JP1021A NBK030609-JP1021B Leaded: NBK030609-JP1021C NBK190609-JP1021B NBK030609-JP1021D SU05001 – 2004A SU05001 – 2014A E10480 29862 N/A Applications Ampere Range 1A – 3.5A 4A – 5A 7A 1A – 3.5A 4A – 5A 7A 0.200A – 3.15A 4A – 7A Used as supplementary protection in appliance or utilization equipment to provide individual protection for components or internal circuits. Electrical Characteristics for Series % of Ampere Rating Ampere Ratings 100% 0.080A – 7A 135% 0.200A – 3.15A 4A – 7A 200% Opening Time 4 hours, Minimum All Ratings 1 hour, Maximum 2 minutes, Maximum 0.080A – 7A Additional Information Datasheet Samples Resources Accessories For recommended fuse accessories for this product series, see ‘Recommended Accessories’ section. © 2019 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 07/31/19 Axial Lead & Cartridge Fuses 5×20 mm > Slo-Blo® Fuse > 239 Series Electrical Characteristic Specification by Item Nominal Melting I2t (A2 sec) 250 28.1750 0.02500 x x 250 17.3425 0.05500 x x 250 11.6000 0.08500 x x 0.15 250 8.1000 0.13000 x .200 0.2 250 3.8725 0.16500 x .250 0.25 250 .300 0.3 250 Amp Rating (A) .080 0.08 .100 0.1 .125 0.125 .150 Voltage Rating (V) Agency Approvals Nominal Cold Resistance (Ohms) Amp Code .400 0.4 250 .500 0.5 250 Interrupting Rating 35A @ 250 VAC 10kA @ 125 VAC PS E x x x x 3.0700 0.34000 x x x x 2.3000 0.61500 x x x x 1.4750 2.02000 x x x x 0.9090 1.98500 x x x x .600 0.6 250 0.6990 2.41500 x x x x .700 0.7 250 0.5375 4.12000 x x x x .750 0.75 250 0.4710 5.42500 x x x x .800 0.8 250 0.4155 7.56500 x x x x 001. 1 250 0.2965 11.29500 x x x x x 1.25 1.25 250 0.1980 19.52500 x x x x x 01.6 1.6 250 0.1205 30.43000 x x x x x 002. 2 250 0.0943 50.58500 x x x x x 02.5 2.5 250 003. 3 250 10kA @ 125 VAC 100A @ 250 VAC 0.0583 79.70500 x x x x x 0.04877 129.51000 x x x x x x x x 3.15 3.15 250 0.0414 128.05000 x 03.2 3.2 250 0.0385 128.05000 x 03.5 3.5 250 0.0370 128.05000 x 004. 4 125 0.0312 270.703 x 005. 5 125 007. 7 125 10kA @ 125 VAC x x x x x x x x 0.0199 302.836 x x x x x 0.0114 305.758 x x x x x Average Time Current Curves 0.200A 0.250A 0.300A 0.400A 0.500A 0.600A 0.700A 0.750A 0.800A 1A 1.25A 1.6A 2A 2.5A 3A 3.15A 4A 5A 7A Temperature Re-rating Curve x 10000 1000 TIME IN SECONDS 100 Note: Rerating depicted in this curve is in addition to the standard derating of 25% for continuous operation. 10 1 0.1 0.01 0.001 0.1 1 10 100 1000 CURRENT IN AMPERES © 2019 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 07/31/19 Axial Lead & Cartridge Fuses 5×20 mm > Slo-Blo® Fuse > 239 Series Soldering Parameters - Wave Soldering Recommended Process Parameters: 280 Wave Parameter 260 240 Preheat: (Depends on Flux Activation Temperature) 220 200 180 160 Lead-Free Recommendation (Typical Industry Recommendation) Temperature Minimum: 100°C Temperature Maximum: 150°C Preheat Time: 60-180 seconds 140 120 100 80 60 40 Solder Pot Temperature: 260°C Maximum Solder Dwell Time: 2-5 seconds Recommended Hand-Solder Parameters: Time (Seconds) Cooling Time Preheat Time Dwell Time 240 230 220 210 200 190 180 170 160 150 140 130 120 110 90 100 80 70 60 50 40 30 0 0 20 20 10 Temperature (°C) - Measured on bottom side of board 300 Solder Iron Temperature: 350°C +/- 5°C Heating Time: 5 seconds max. Note: These devices are not recommended for IR or Convection Reflow process. Product Characteristics Materials Body: Glass Cap: Nickel–plated brass Leads: Tin–plated Copper Operating Temperature –55ºC to +125ºC Terminal Strength MIL-STD-202, Method 211, Test Condition A Thermal Shock MIL-STD-202, Method 107, Test Condition B: (5 cycles –65ºC to +125ºC) Solderability MIL-STD-202 Method 208 Vibration MIL-STD-202, Method 201 Product Marking Cap 1: Brand logo, current and voltage rating Cap 2: Series and agency approval markings Humidity MIL-STD-202, Method 103, Test Condition A. high RH (95%) and elevated temp (40ºC) for 240 hours Salt Spray MIL-STD-202, Method 101, Test Condition B © 2019 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 07/31/19 Axial Lead & Cartridge Fuses 5×20 mm > Slo-Blo® Fuse > 239 Series Dimensions Part Numbering System 0239 xxxx M X P 20+0.5 5.2+0.1 -0.2 0239 000P 5.1+0.6 Series Amp Code 5.1+0.6 Refer to Amp Code column of Electrical Characteristics Table 5.5±0.3 21.5±1.0 40±1.0 0239 000XEP Quantity Code M = 1000 Notes: * Ratings above 6.3A have 0.8±0.05 diameter lead. Packaging Code 0.65±0.05* X = Filler All dimensions in mm Lead-free Packaging Packaging Option Packaging Specification Quantity Bulk N/A 1000 Quantity & Packaging Code Taping Width MX N/A 239 Series Bulk N/A 1000 MXE N/A Reel and Tape EIA 296-E 1000 MRET1 T1=52mm (2.062”) Bulk N/A 1000 MXB N/A Bulk N/A 100 HX N/A Bulk N/A 100 HXE N/A Recommended Accessories Accessory Type Holder Block Clip Max Application Voltage Max Application Amperage Series Description 345_ISF Panel Mount Shock-Safe Fuseholder 10 345 Shock-Safe Fuseholder with PC Mount, Solder Mount and Panel Mount options 20 830 PC Mount Shock-Safe Miniature Fuseholder 16 520 Metric OMNI-BLOK® Fuse Block 646 PC Mount Miniature Fuse Block 10 250 6.3 658 Surface Mount Miniature Fuse Block 10 520_W PC Mount Miniature Fuse Clip 6.3 111 PC Board Mount Fuse Clip 10 445 PC Board Mount Fuse Clip 10 Notes: 1. Do not use in applications above rating. 2. Please refer to fuseholder data sheet for specific re-rating information. 3. Please contact factory for applications greater than the max voltage and amperage shown. Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at: www.littelfuse.com/disclaimer-electronics. © 2019 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 07/31/19