0313010.MXP

Axial Lead & Cartridge Fuses 3AG > Slo-Blo® Fuse > 313/315 Series 313/315 Series Lead-Free 3AG, Slo-Blo® Fuse RoHS Pb PS E Description The 3AG Slo-Blo® fuse solves a broad range of application requirements while offering reliable performance and costeffective circuit protection. The fuse catalog number with the suffix “ID” instantly identifies itself upon opening by showing a discoloration of its glass body. Guesswork and time consuming circuit testing are eliminated. This unique design offers the same quality performance characteristics as the standard 3AG Slo-Blo® Fuse design. Features Agency Approvals Agency PS E Agency File Number Ampere Range E10480 0.010A - 10A** 29862 0.010A - 10A**/15A** E10480 10A - 30A 313 Series (Cartridge): NBK060618-E10480A NBK060618-E10480C 315 Series (Leaded): NBK060618-E10480B NBK060618-E10480D SU05001-6004 SU05001-5007 SU05001-5008 SU05001-5009 1-5A 6.25- 10A** N/A • Conforms to UL/CSA/ NMX 248-1 and UL/CSA/ NMX 248-14 • RoHS compliant and Lead-free • Conforms to DENAN’s Appendix 3 • Available in cartridge and axial lead format and with various forming dimensions 1-5A 6.25-10A** Applications 2.25-2.5A 2.8A - 3.2A 4A - 6.3A 7A-8A Used as supplementary protection in appliance or utilization equipment to provide individual protection for components or internal circuits. 0.010A - 10A** ** See note under Electrical Characteristics by item Electrical Characteristics by Series Additional Information Datasheet 313 Series Resources 313 Series Samples 313 Series % of Ampere Rating Ampere Rating Opening Time 100% 10mA – 30A 4 hours, Minimum 135% 10mA – 30A 1 hour, Maximum 10mA – 15A 5 sec., Min.,30 sec., Max 20A – 30A 5 sec., Min.,60 sec Max 200% Accessories 313 & 315 Series Datasheet 315 Series Resources 315 Series Samples 315 Series For recommended fuse accessories for this product series, see ‘Recommended Accessories’ section. © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 11/05/20 Axial Lead & Cartridge Fuses 3AG > Slo-Blo® Fuse > 313/315 Series Electrical Characteristic Specifications by Item Amp Code Ampere Rating (A) Voltage Rating (V) .010 .031 .040 .062 .100 .125 .150 .175 .187 .200 .250 .300 .375 .400 .500* .600 .700 .750 .800 001.* 01.2 1.25 01.5* 01.6 01.8 002.* 2.25 02.5 02.8 003.* 03.2 004.* 005.* 6.25* 06.3 007.* 008.* 010.** 010.* 012. 015. 020. 025. 030. 0.01 0.031 0.04 0.062 0.1 0.125 0.15 0.175 0.187 0.2 0.25 0.3 0.375 0.4 0.5 0.6 0.7 0.75 0.8 1 1.2 1.25 1.5 1.6 1.8 2 2.25 2.5 2.8 3 3.2 4 5 6.25 6.3 7 8 10 10 12 15 20 25 30 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 32 32 32 32 32 32 Interrupting Rating 35A@250Vac 10KA@125Vac 100A@250Vac 10KA@125Vac 200A@250Vac 10KA@125Vac 300A@32Vac Agency Approvals Nominal Cold Nominal Resistance Melting (Ohms) I2t (A2 sec) 4300.0000 430.0000 300.0000 120.0000 43.0000 30.0000 20.0000 8.6700 8.0100 6.5900 4.2700 3.1350 2.0950 1.8750 1.2600 0.9120 0.7000 0.6215 0.5540 0.3750 0.2780 0.2600 0.1910 0.1710 0.1410 0.1169 0.0968 0.0811 0.0675 0.0593 0.0529 0.0311 0.0214 0.0154 0.0154 0.0128 0.0111 0.0083 0.0083 0.0065 0.0050 0.0022 0.0017 0.0012 0.000121 0.00303 0.00630 0.0210 0.0850 0.152 0.270 0.177 0.230 0.270 0.385 0.730 1.23 1.35 2.55 4.00 5.90 7.16 8.00 14.0 21.5 24.0 38.0 49.6 92.0 77.0 121 199 269 200 209 76.1 276 388 388 547 701 1285 1285 1200 2650 9560 16500 26900 PS E x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x - x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x - x x x x x x x x x x x - x x x x x x x x x x x x x x x x x x x x x x x x x - x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x - * For 313series, these ratings available with an indicating option. Add the “ID” designation to the series number. i.e. 313.500ID. ** The 10A is designed for special voltage requirement. Available as 250Vac rated and the part number is 0313010.MX250P © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 11/05/20 Axial Lead & Cartridge Fuses 3AG > Slo-Blo® Fuse > 313/315 Series Average Time Current Curves 1/16A 1/10A 15/100A .175A 1/4A 3/8A 1/2A 3/4A 1A 1 1/2A 2A 3A 4A 5A 7A 8A 10A 12A 15A 20A 25A 30A Temperature Re-rating Curve 1000 A B 100 TIME IN SECONDS B A 10 1 A - For 313/315 Series, from 10mA to 150mA B - For all other ampere ratings of 313/315 series Note: Rerating depicted in this curve is in addition to the standard derating of 25% for continuous operation. 0.1 0.01 0.05 0.1 1 10 CURRENT IN AMPERES 100 1000 Soldering Parameters - Wave Soldering Recommended Process Parameters: 300 Wave Parameter 280 Lead-Free Recommendation Preheat: 240 (Depends on Flux Activation Temperature) (Typical Industry Recommendation) 220 200 180 160 140 120 100 80 Temperature Minimum: 100°C Temperature Maximum: 150°C Preheat Time: 60-180 seconds Solder Pot Temperature: 260°C Maximum Solder Dwell Time: 2-5 seconds Recommended Hand-Solder Parameters: 60 Solder Iron Temperature: 350°C +/- 5°C Heating Time: 5 seconds max. 40 20 Note: These devices are not recommended for IR or Convection Reflow process. 240 230 220 210 200 190 180 170 160 150 140 130 120 110 90 100 80 70 60 50 40 30 20 10 0 0 Temperature (°C) - Measured on bottom side of board 260 Time (Seconds) Cooling Time Preheat Time Dwell Time Packaging Packaging Option Packaging Specification Quantity Quantity & Packaging Code Taping Width 313 Series Bulk N/A 1000 MX N/A Bulk N/A 100 HX N/A 315 Series Bulk N/A 1000 MX N/A Bulk N/A 100 HX N/A Bulk N/A 1000 MXB N/A © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 11/05/20 Axial Lead & Cartridge Fuses 3AG > Slo-Blo® Fuse > 313/315 Series Product Characteristics Body: Glass Cap: Nickel–plated brass Leads: Tin–plated Copper MIL-STD-202, Method 211, Test Condition A Materials Terminal Strength Operating Temperature Thermal Shock MIL-STD-202 method 208 Cap1: Brand logo, current and voltage ratings Cap2: Series and agency approval marks Solderability Product Marking Vibration Humidity Salt Spray –60ºC to +125ºC* MIL-STD-202, Method 107, Test Condition B: (5 cycles -65°C to +125°C) MIL-STD-202, Method 201 MIL-STD-202, Method 103, Test Condition A: High RH (95%) and Elevated temperature (40°C) for 240 hours MIL- STD-202, Method 101, Test Condition B * See Temperature Re-rating Curve Dimensions Part Numbering System 313 000P Series (cartridge) 315 000P Series (axial leaded) 6.35±0.3 (.25") 0313 xxxx M X P Series 6.985±0.3 (.275") 31.75±1.12 (1.25") 313=Cartridge 315=Axial Leaded Amp Code Refer to Amp Code column of Electrical Characteristics Table 32.72±1.12 (1.288") Axial Lead Diameter: 0.81±0.05 (.032") for (0.01A - 15A) 1.02±0.06 (.040") for (20A - 30A) Quantity Code Axial Lead Length: 38.1±3.15 (1.50") TYP. Axial Lead Material: Tin-coated copper Measurements displayed in millimeters (inches) M = 1000 Packaging Code X = Filler Lead-free Recommended Accessories Accessory Type Holder Block Clip Series Description Max Application Max Application Voltage Amperage 32 20 155100 Twist-Lock In-Line Fuseholder 342 Traditional Panel Mount Fuseholder 250 20 346 Panel Mount Flip-Top Shock-Safe Fuseholder 250 15 345 Shock-Safe Fuseholder with PC Mount, Solder Mount and Panel Mount options 250 354 Low Profile OMNI-BLOK® Fuse Block 359 High Current Screw Terminal Fuse Block 122 High Current Traditional PC Board Fuse Clip 1000 30 101 Rivet/Eyelet Type Fuse Clip 1000 15 600 16 30 30 Notes: 1. Do not use in applications above rating. 2. Please refer to fuseholder data sheet for specific re-rating information. 3. Please contact factory for applications greater than the max voltage and amperage shown. Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at https://www.littelfuse.com/legal/disclaimers/product-disclaimer.aspx. © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 11/05/20