03420858HXPL

Fuseholder Datasheet 342 Series Panel Mount Enclosed Fuseholders for 3AG/AB Fuses RoHS Pb Product Characteristics General Application Products Compatible Fuses Electrical Ambient Temperature Dielectric Strength General Application / Straight Terminal Product Dimensions 3/16” Q.C. .7" .090" X .12" HOLE .45" FLATS TYP. 1/4” Q.C. .78" .7" 1" 1" .3" .4" 1.31" Mounting Hole .502" .510" .032" –40ºC to +85ºC 2400 volts minimum Ingression Protection Rating .475" .480" .020" .11" DIA. 3AG/AB Rated at 20 amperes for any voltage up to 250 1500 volts minimum Withstands 15 lb.in. mounting torque; Mounting maximum panel thickness: .187” Black thermoplastic Molded Parts (UL94 V-0) Neoprene washer provide drip-proof protection on Seal the front side of the panel (upon request) Copper & copper alloy. Tin plated, except Terminals ¼” Quick-Connect terminals are nickel plated Comes with a mounting Hardware nut and neoprene washer Dimensions Solder Watertight Product Withstands 15 lb.in. mounting torque; maximum panel thickness is .250” Black thermoset (UL94 V-0) O-ring provides a watertight seal on the front side of the panel per MIL-PRF-19207 Copper & copper alloy. Tin plated O-rings (2) and hex nut, unassembled IP40 IP67 Agency Approvals .69" HEX FLATS Agency Agency File Number E14721 7316 (*Except 342 006) General Application / Right Angle Terminal Product Dimensions Solder 3/16” Q.C. 1/4” Q.C. .69" DIA. .78" Ordering Information .78" .7" Body Terminal Type Mounting Hole 1" 1" .63" .085" X .12" HOLE .187" DETENT Straight .250" .14" DIA. HOLE .56" Catalog Number Connect Fluted Knob Knurled Knob General Application Products .502" .510" .032" .06" DIA.HOLE .45" FLATS TYP. .69" HEX FLATS .475" .480" 1" .020" Angle .59" Right Angle Watertight Product Dimensions .12" DIA. HOLES Solder 342 014 342 012 3/16” Q.C. 342 038 342 058 1/4” Q.C. 342 838 342 858 Solder 342 004 342 022 3/16” Q.C. 342 028 342 048 1/4” Q.C. 342 828 342 848 Watertight Product Straight .94" DIA. Solder 342 006 * Not Applicable Note: Refer to Fuseology for information on proper fuseholder re-rating. .81" 1.3 " Additional Information MOUNTING HOLE .570" .575" .81 " .625" .635" Resources Accessories Samples Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at: www.littelfuse.com/disclaimer-electronics. 1 © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 06/04/21