03450701H

Cartridge Fuse Holders Enclosed Fuseholders > Panel Mounted > Circuit Board Mounted 345 HV Series Panel Mount Enclosed Fuse Holders RoHS Pb Product Characteristics Compatible Fuses Agency Approval Agency Agency File Number 3AG/AB Description Designed to eliminate the possibility of electrical shock, as defined in IEC standards 60127-6. The universal fuseholder body will accept 3AB, 3AG, and 5 × 20mm fuse sizes. Electrical Insulation Resistance: 10,000 megohm minimum at 500 VDC. Contact Resistance: Less than .005 ohm average at currents up to 1 ampere. Dielectric Strength: 4,000 volts minimum. Mounting Threaded styles withstand 15 in.-lb. mounting torque. Low profile and High profile panel thickness: .032” min./.310” max. Molded Parts Body Material: Black glass-filled thermoplastic (UL 94V0). Knob Material Grey or black glass-filled thermoplastic (UL94 V-0) Hex Nut Material: Black glass-filled thermoplastic. Knob Fuse Extractor type with plated copper alloy insert. Plated copper alloy contact clips. Spring loaded, locking mechanism provides an anti-tease feature and will not vibrate loose. Terminals Plated cooper alloy, A-187; dual purpose terminal accepts wire for soldering or a Quick-Connect receptacle. Ambient Temperature –40ºC to +85ºC. Hardware Threaded style fuseholders are supplied with a thermoplastic hex nut unassembled. 5×20mm E14721 20A, 600V 20A, 600V 7316 20A, 600V 20A, 600V For 3AB/3AG, 5×20mm Fuses * Please refer to Fuseology section for information on proper fuseholder re-rating. Additional Information Datasheet © 2017 Littelfuse, Inc. Specifications are subject to change without notice. Application testing is strongly recommended. Revised: 12/19/17 Resources Samples Cartridge Fuse Holders Enclosed Fuseholders > Panel Mounted > Circuit Board Mounted 345 HV Series Panel Mount Enclosed Fuse Holders Dimensions Terminal Styles Low Profile Screwdriver Slot Knob .65" DIA. (16.5) KNOB - GRAY: 0345601, 0345611 BLACK: 0345621, 0345631 .090" x .160" [2.3mm x 4.1mm] HOLE .187" 1.50 (38.1) 1.66 (42.2) 0.37 (9.4) [4.8mm] 1/2-32 (2A) DOUBLE-LEAD THREAD 3/16" DUAL PURPOSE SOLDER/QUICK CONNECT Bottom Terminal Suggested Mounting Holes Right Angle Straight .475" [12.1] .460" .502" [12.8] .510" [13.0] High Profile Screwdriver Slot Knob .65" DIA. (16.5) KNOB - GRAY: 0345602, 0345612 BLACK: 0345622, 0345632 0.37 (9.4) .480" [12.2] 1.21 (30.7) 1.66 (42.2) A .465" [11.8] A C Plastic Hex Nut with Flange .65" [16.5] DIA. .19" [4.8] .63" [16] .91" [23.1] DIA. Low Profile Fingergrip Knob .558" [14.2] HEX. SPECIAL 1/2" THREAD .65" DIA. (16.5) 0.37 (9.4) B in. .62" .37" .020" mm 15.7 9.4 0.5 "Push-On" Type Retaining Nut for Quick Mount Fuseholder 1/2-32 (2A) DOUBLE-LEAD THREAD B C {11.7] 1/2-32 (2A) DOUBLE-LEAD THREAD 1.21 (30.7) Rear Mount Fingergrip Knob .65" DIA. (16.5) 1.66 (42.2) Fast Mount Low Profile Screwdriver Slot Knob KNOB - GRAY: 0345701, 0345711 BLACK: 0345721, 0345731 8º| +5º| /-3º| .65" DIA. (16.5) .020 (.51) 1/2-32 (2A) DOUBLE-LEAD THREAD 1.50 (38.1) 1.66 (42.2) 0.37 (9.4) 0.80 (20.3) Part Numbering System Part Number (3AG/AB) 5x20mm Knob Type Low Profile X 03450601H 03450621H Screwdriver Slot 03450602H 03450622H Screwdriver Slot High Profile Front Mount Rear Mount Rt. Angle Terminal Straight Terminal Packing X X Bulk (100 pieces) X X X Bulk (100 pieces) X X X 03450603H 03450623H Finger Grip 03450611H 03450631H Screwdriver Slot 03450612H 03450632H Screwdriver Slot X X X Bulk (100 pieces) 03450613H 03450633H Finger Grip X X X Bulk (100 pieces) 03450701H -- Screwdriver Slot X X 03450711H -- Screwdriver Slot X X X X Bulk (100 pieces) X X Bulk (100 pieces) X 03450903H 03450923H Finger Grip X X 03450913H 03450933H Finger Grip X X Bulk (100 pieces) X Bulk (100 pieces) Bulk (100 pieces) X Bulk (100 pieces) © 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 12/19/17 Cartridge Fuse Holders Enclosed Fuseholders > Panel Mounted > Circuit Board Mounted 345 HV Series Shock Safe Circuit Board Mount Enclosed Fuse Holders RoHS Pb Product Characteristics 3AG 3AB 5×20mm Compatible Fuse Types Similar to our Shock-Safe panel mount fuseholders, this series is designed per IEC Standards 60127-6. Two different knob styles available are available for use with 3AG and 3AB (¼” × 1¼”) or 5 × 20mm fuses. Description Agency Approvals Agency Agency File Number E14721 * Please refer to Fuseology section for information on proper fuseholder re-rating. Dimensions .49" [12.5] 1.77" [45.0] .44" [11.2] .598" [15.2] .602" [15.3] .698" [17.7] .702" [17.8] Dielectric Strength 4000 volts minimum. Mounting: Intended for soldering to printed circuit boards. Molded Parts Body Material: Black glass-filled thermoplastic (UL 94V0). Knob Screwdriver slot, fuse extractor type with nickel-­plated, copper alloy insert. Spring-loaded, bayonet style. Knob Material: Grey or Black glass-filled thermoplastic (UL94 V-0) Terminals Brass. Tin-plated. Ambient Temperature –40ºC to +85ºC. Ordering Part Number 133923 .20" [5.1] .24" [6.1] Insulation Resistance: 10,000 megohm minimum at 500 VDC. Contact Resistance: Less than .005 ohm average at a current of one ampere. Ordering Information 7316 .68" [17.3] Electrical .48" [12.2] .12" [3.1] .040" [1.0] .242" [6.2] .246" [6.3] .056" [1.4] DIA. © 2017 Littelfuse, Inc. Specifications are subject to change without notice. Application testing is strongly recommended. Revised: 12/19/17 Catalog Number Fuse Size Packing 03450101H 345 101 ¼” × 1¼” Fuses Bulk (100 pieces) 03450121H 345 121 5 × 20mm Fuses Bulk (100 pieces) Body only: 03450101HX010 Knob only: 03450101HX020 (¼” × 1¼”) Grey; 03450121HX020 (5 × 20mm) Black.