0440.500WRA

Surface Mount Fuses Ceramic Fuse > 440A Series 440A Series, 1206 High I2t Fuse RoHS Pb Description The 440A Series AECQ-Compliant fuses are specifically tested to cater to secondary circuit protection needs of compact auto electronics applications. The general design ensures excellent temperature stability and performance reliability. This high I2t fuse series is designed to have ultra high inrush current withstand capability to avoid nuisance fuse open. Features Agency Approvals Agency Agency File Number Ampere Range E10480 0.500A - 8A 29862 0.500A - 8A Electrical Characteristics for Series % of Ampere Rating Ampere Rating Opening Time at 25ºC 100% 0.50A - 0.75A 1.75A - 8A 4 hours, Minimum 350% 0.50A - 0.75A 1.75A - 8A 5 secs., Maximum • Ultra high I2t values • Operating Temperature from -55ºC to +150ºC • Fast response to faulty current to ensure over• 100% Lead-free, RoHS compliant and Halogen-free current protection to sensitive electronic • Meets Littelfuse’s component automotive qualifications* * - Largely based on Littelfuse internal AEC-Q200 test plan. Applications • Li-ion Battery • LED Lighting • Automotive Navigation System • TFT Display • Battery Management System (BMS) • Cluster Additional Information Datasheet Resources Samples Electrical Specifications by Item Ampere Rating (A) Amp Code Max. Voltage Rating (V) 0.5 .500 63 0.75 .750 63 1.75 1.75 63 2 002. 63 2.5 02.5 63 Interrupting Rating (AC/DC)1 50A @ 63VAC/DC Agency Approvals Nominal Resistance (Ohms)2 Nominal Melting I2t (A2Sec.)3 Nominal Voltage Drop At Rated Current (V)4 Nominal Power Dissipation At Rated Current (W) 0.8140 0.02642 0.4831 0.242 x X 0.4624 0.09312 0.3983 0.299 x X 0.0450 0.3312 0.0777 0.136 x X 0.0385 0.4326 0.0792 0.158 x X 0.02850 0.8191 0.0747 0.187 x X 0.02252 1.232 0.0742 0.223 x X 0.01845 1.789 0.0757 0.265 x X 3 003. 63 3.5 03.5 63 4 004. 63 0.01553 2.601 0.0709 0.284 x X 5 005. 63 0.0120 4.761 0.0654 0.327 x X 7 007. 63 0.00753 8.464 0.0696 0.487 x X 8 008. 63 0.00634 12.95 0.0655 0.524 x X 50A @ 32VAC/63VDC Notes: 1. AC Interrupting Rating tested at rated voltage with unity power factor. DC Interrupting Rating tested at rated voltage with time constant < 0.8 msec. 2. Nominal Resistance measured with < 10% rated current. 3. Nominal Melting I²t measured at 1msec. opening time. 4. Nominal Voltage Drop measured at rated current after temperature has stabilized. Devices designed to carry rated current for 4 hours minimum. It is recommended that devices be operated continuously at no more than 80% rated current. See “Temperature Derating Curve”for additional derating information. Devices designed to be mounted with marking code facing up. © 2019 Littelfuse, Inc. Application testing is strongly recommended. Specifications are subject to change without notice. Revised: 04/30/19 Surface Mount Fuses Ceramic Fuse > 440A Series 1.75A 2A 2.5A 3A 3.5A 4A 5A 7A 8A 100 140 120 100 10 80 60 40 -65 -45 -25 -5 15 35 55 75 95 115 135 155 TEMPERATURE (°C) TIME IN SECONDS PERCENT OF RATING 0.75A Average Time Current Curves 0.5A Temperature Rerating Curve 1 0.1 Note: 1. Rerating depicted in this curve is in addition to the standard derating of 20% for continuous operation. Example: 0.01 For continuous operation at 75 degrees celsius, the fuse should be derated as follows: I = (0.80)(0.85)IRAT = (0.68)IRAT 0.001 0.1 1 10 1000 100 CURRENT IN AMPERES Soldering Parameters Pb-free assembly Pre Heat - Temperature Min (Ts(min)) 150°C - Temperature Max (Ts(max)) 200°C - Time (Min to Max) (ts) 60 – 180 seconds Average Ramp-Up Rate (Liquidus Temp (TL) to peak) 3°C/second max. TS(max) to TL - Ramp-up Rate 5°C/second max. Reflow - Temperature (TL) (Liquidus) 217°C - Temperature (tL) 60 – 150 seconds Peak Temperature (TP) 260+0/-5 °C Time within 5°C of actual peak Temperature (tp) 10 – 30 seconds Ramp-down Rate 6°C/second max. Time 25°C to peak Temperature (TP) 8 minutes max. Do not exceed 260°C Wave Soldering tP TP Critical Zone TL to TP Ramp-up TL TS(max) Temperature Reflow Condition tL Ramp-down TS(min) 25 Preheat tS time to peak temperature (t 25ºC to peak) Time 260°C, 10 seconds max. © 2019 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 04/30/19 Surface Mount Fuses Ceramic Fuse > 440A Series Product Characteristics Body: Advanced Ceramic Terminations: Ag / Ni / Sn (100% Lead-free) Element Cover Coating: Lead-free Glass High Temperature Storage Moisture Sensitivity Level IPC/JEDEC J-STD-020, Level 1 Biased Humidity Solderability IPC/ECA/JEDEC J-STD-002, Condition C Operational Life MIL-STD-202, Method 108, Test Condition D Humidity Test MIL-STD-202, Method 103, Conditions D Resistance to Solder Heat MIL-STD-202, Method 215 MIL-STD-202, Method 210, Condition B Resistance to Solvents Mechanical Shock MIL-STD-202, Method 213, Test Condition C Moisture Resistance MIL-STD-202, Method 106 Thermal Shock MIL-STD-202, Method 107, Condition B Mechanical Shock MIL-STD-202, Method 213, Condition A Vibration MIL-STD-202, Method 201 Materials Vibration, High Frequency Dissolution of Metallization Terminal Strength MIL-STD-202, Method 204, Condition D IPC/ECA/JEDEC J-STD-002, Condition D IEC 60127-4 Dimensions MIL-STD-202, Method 108 with exemptions Thermal Shock Test High Frequency Vibration Resistance to Soldering Heat JESD22 Method JA-104, Test Conditions B and N MIL-STD-202, Method 103, 85C/85% RH with 10% operating power for 1000 hrs MIL-STD-202, Method 204 MIL-STD-202, Method 210, Test Condition B Solderability JESD22-B102E Method 1 Terminal Strength for SMD AEC Q200-006 Board Flex AEC Q200-005 Electrical Characterization 3 Temperature Electrical Part Marking System Amp Code 3.200 ± .1778 [.126 ± .007] 1.63 + .10/ -.20 1.000 [.039] [.064 + .004/ -.008] F 0.750 G 1.75 L 002.0 N O 02.5 .835 +/-.015 [.0329 +/-.006] TERMINATION Marking Code 0.500 003.0 P 03.5 R 004.0 S 005.0 T 007.0 W 008.0 X Part Numbering System 0440 008. W R A 0.520 ± .200 [.020 ± .008] 1.000 [.039] SERIES AMP CODE 1.500 [.059] QUANTITY CODE W = 3000 pcs 1.800 [.071] PACKING CODE R = Reel Pack 3.500 [.138] AEC-Q200 QUALIFIED Packaging Packaging Option Packaging Specification Quantity Quantity and Packaging Code 8mm Tape and Reel EIA-481, IEC 60286, Part 3 3000 WRA © 2019 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 04/30/19