0465002.DR

Axial Lead & Cartridge Fuses NANO2® > 250V UMF Time Lag Fuse > 465 Series 465 Series Fuse RoHS PS E Description The Surface Mount Nano2® 250V UMF product family complies with IEC 60127-4 which covers Universal Modular Fuse-Links [UMF]. This is an IEC standard that is accepted world wide. Features • Listed to IEC 60127-4, Universal Modular Fuse-Links (UMF) • 250VAC Voltage rating • RoHS compliant and Halogen Free Agency Approvals Agency PS E Agency File Number Ampere Range NBK030205-E10480B 1A - 5A NBK101105-E184655 6.3A E184655 0.25A - 6.3A Electrical Characteristics for Series % of Ampere Rating Applications • Power supply • White goods • Lighting system • Industrial equipment Additional Information Opening Time 125% 1 hour, Minimum 200% 2 minutes, Maximum 1000% 0.01 sec., Min.; 0.1 sec., Max. Datasheet Samples Resources Electrical Specifications by Item Ampere Rating (A) Amp Code Max Voltage Rating (V) 1.00 001. 1.25 1.25 1.60 Interrupting Rating Agency Approvals Nominal Cold Resistance (Ohms) Nominal Melting I2t (A2sec) 250 0.1070 2.5 x x 250 0.0830 5.6 x x 01.6 250 0.0560 9.0 x x 2.00 002. 250 0.0390 14.4 x x 2.50 02.5 250 0.0260 19.6 x x 3.15 3.15 250 0.0210 32.4 x x 4.00 004. 250 0.0160 48.4 x x 5.00 005. 250 0.0130 90.0 x x 6.30 06.3 250 0.0088 144.4 x x 100A@250VAC PS E Notes: - l2t calculated at 8ms. - Resistance is measured at 10% of rated current, 25ºC - For information and availability of additional ratings please contact Littelfuse © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 01/31/20 Axial Lead & Cartridge Fuses NANO2® > 250V UMF Time Lag Fuse > 465 Series Average Time Current Curves 1A 1.25A 1.6A 2A 2.5A 3.15A 4A 5A 6.3A Temperature Re-rating Curve 100 TIME IN SECONDS 10 1 0.1 Note: 1. Rerating depicted in this curve is in addition to the standard derating of 15% for continuous operation. 0.01 0.001 .05 10 1 100 1000 CURRENT IN AMPS Soldering Parameters Pb – Free assembly Pre Heat - Temperature Min (Ts(min)) 150°C - Temperature Max (Ts(max)) 200°C - Time (Min to Max) (ts) 60 - 180 secs Average ramp up rate (Liquidus Temp (TL) to peak 5°C/second max. TS(max) to TL - Ramp-up Rate Reflow 5°C/second max. - Temperature (TL) (Liquidus) 217°C - Temperature (tL) 60 - 150 secs Peak Temperature (TP) 260+0/–5 °C Time within 5°C of actual peak Temperature (tp) 20 – 40 seconds Ramp-down Rate 5°C/second max. Time 25°C to peak Temperature (TP) 8 minutes max. Do not exceed 260°C Wave Soldering Parameters tP TP Critical Zone TL to TP Ramp-up TL TS(max) Temperature Reflow Condition tL Ramp-down TS(min) 25 Preheat tS time to peak temperature (t 25ºC to peak) Time 260°C Peak Temperature, 3 seconds max. © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 01/31/20 Axial Lead & Cartridge Fuses NANO2® > 250V UMF Time Lag Fuse > 465 Series Product Characteristics Body: High Performance Ceramic Terminations: Silver plated brass. Brand, Ampere Rating, Voltage Rating, UMF Logo Materials Product Marketing Operating Temperature –55OC to 125OC Moisture Sensitivity Level J-STD-020, Level 1 Solderability IEC 60127-4 Insulation Resistance (after opening IEC 60127-4 (0.1Mohm min @ 500VDC) Shock MIL-STD-202, Method 213, Test Condition A Dimensions Vibration MIL-STD-202, Method 201 (10-55 Hz) Moisture Resistance MIL-STD-202, Method 106, 10 cycles Salt Spray Resistance to Soldering Heat MIL-STD-202, Method 101, Test Condition B (48hrs) IEC 60127-4 Part Numbering System 12.1 (.475") T500mAL AC250V F 4.5 (.177") Mechanical Shock MIL-STD-202, Method 107, Test Condition B , 5 cycles, –65OC to 125°C MIL-STD-202, Method 213, Test Condition A Thermal Shock 2.8 (.11") 0465 .500 D R 6.7 (.264") Series 5.6 (.22") Amp Code* Refer to Electrical Characteristics table 6.9 (.27") WAVE SOLDER TOP VIEW 4.5 (.177") Height END CAP 5.6 (.22") Quantity code 3.5 (.14") D = 1500 pcs Packaging Code R = Tape and Reel 6.8 (.264") REFLOW SOLDER *Example: 2.5 amp product is 046502.5DR (0.5 amp product shown above). Packaging Packaging Option Packaging Specification Quantity 24mm Tape and Reel EIA RS-481-1 (IEC 60286-3) 1500 Quantity & Packaging Code DR Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at: www.littelfuse.com/disclaimer-electronics. © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 01/31/20