0468003.NR..

Surface Mount Fuses Thin Film > 1206 Size > Slo-Blo® > 468 Series 468 Series Fuse Description The 468 Series Time-Lag (Slo-Blo®) SMF is a small (1206 size) thin-film device designed for secondary protection of circuits used in space constrained applications such as hand-held portable electronic devices. Features Agency Approvals AGENCY AGENCY FILE NUMBER AMPERE RANGE E10480 500MA - 3A LR29862 500MA - 3A t
$PNQMJFT
XJUI
electronic industry environmental standards for lead reduction. t
1BDLBHF
JT
WJTVBMMZ
distinct from fastacting version for easy identification. t
1SPEVDU
JT
DPNQBUJCMF
with lead-free solders and higher temperature profiles. t
5PQ
TJEF
NBSLJOH
BMMPXT
visual verification of amperage rating. t
5JNF
EFMBZ
GFBUVSF
withstands high inrush currents and prevents nuisance openings. Electrical Characteristics for Series % of Ampere Rating Opening Time at 25OC 100% 4 hours, Minimum 200% 1 sec., Min.; 120 sec., Max. 300% 0.05 sec., Min.; 1.5 sec., Max 800% 0.0015 sec., Min.; .05 sec., Max. Applications Secondary protection for space constrained applications: t
$FMM
QIPOFT t
%7%
QMBZFST t
#BUUFSZ
QBDLT t
)BSE
EJTL
ESJWFT t
%JHJUBM
DBNFSBT Electrical Specifications by Item Ampere Rating (A) Amp Code Max Voltage Rating (V) 0.50 .500 63 1.00 001. 63 1.50 01.5 63 2.00 002. 63 2.50 02.5 63 3.00 003. 32 Interrupting Rating 50 amperes @63 VAC/VDC Agency Approvals Nominal Melting I2t (A2sec) Nom Voltage Drop (mV) Nom Power Dissipation (W) 0.27000 0.0310 156.77 0.0784 x x 0.08250 0.1270 94.70 0.0947 x x Nominal Cold Resistance (Ohms) 0.04750 0.2880 82.32 0.1235 x x 35 amperes @63 VAC 50 amperes @63 VDC 0.03240 0.5060 77.27 0.1545 x x 0.02240 1.0110 73.92 0.1848 x x 50 amperes @32 VAC/VDC 0.01950 1.2700 72.95 0.2189 x x 1. Measured at 10% of rated current, 25ºC. 2. Measured at rated voltage. © 2009 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com/series/468.html for current information. 37 Revised: January 7, 2009 468 Series 468 Series This series is 100% lead-free and meets the requirements of the RoHS directive. New Halogen-Free 468 Series fuses are available–to order use the “HF” suffix. See Part Numbering section for additional information. Mount Fuses IntroductionSurface to Circuit Protection ® Thin Film > 1206 Size > Slo-BloTransientology > 468 Series 2A 2.5A 3A 1A 100 1.5A Average Time Current Curves .5A Temperature Rerating Curve Time in Seconds 10 1 0.1 Note: 0.01 1. Derating depicted in this curve is in addition to the standard derating of 25% for continuous operation. Example: For continuous operation at 70 degrees celsius, the fuse should be deratedas follows: I = (0.75)(0.80)IRAT = (0.60)IRAT 0.001 0 1 10 100 Current in Amperes Soldering Parameters Pre Heat Pb – Free assembly 150°C - Temperature Max (Ts(max)) 200°C - Time (Min to Max) (ts) 60 – 180 secs TL TS(max) 5°C/second max TS(max) to TL - Ramp-up Rate 5°C/second max - Temperature (TL) (Liquidus) 217°C - Temperature (tL) 60 – 150 seconds 250 Time within 5°C of actual peak Temperature (tp) 20 – 40 seconds Ramp-down Rate 5°C/second max Time 25°C to peak Temperature (TP) 8 minutes Max. Do not exceed 260°C Wave Soldering 468 Series tL Ramp-down TS(min) Preheat tS 25 Peak Temperature (TP) +0/-5 Critical Zone TL to TP Ramp-up - Temperature Min (Ts(min)) Average ramp up rate (Liquidus Temp (TL) to peak Reflow tP TP Temperature Reflow Condition time to peak temperature (t 25ºC to peak) Time °C 260°C, 10 seconds max. 38 Revised: January 7, 2009 © 2009 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com/series/468.html for current information. Surface Mount Fuses Thin Film > 1206 Size > Slo-Blo® > 468 Series Product Characteristics Materials Body: Epoxy Substrate Terminations: 100% Tin Element Cover Coat: Conformal Coating Operating Temperature –55OC to 90OC. Consult temperature rerating curve chart. For operation above 90°C please contact Littelfuse Thermal Shock Withstands 5 cycles of – 50OC to 125OC Humidity MIL-STD-202F, Method 103B, Condition D Withstands 10-55 Hz per MIL-STD-202F, Method 201A and 10-2000 Hz at 20 G’s per MIL-STD-202F, Method 204D, Condition D Insulation Resistance (After Opening) Greater than 10,000 ohms. Resistance to Soldering Heat MIL-STD-202G, Method 210F, Condition D Part Marking System MARKING CODE VARIES WITH AMPERAGE RATING (SEE CHART) .66 (.026") .58 (.023") 1.27 (.050") Coating 1.52 (.060") Amp Code Marking Code .500 TF 001. TH 01.5 TK 002. TN 02.5 TO 003. TP 468 Series Dimensions Vibration Part Numbering System 3.18 (.125") 0468002.NRHF 1.65 (.065") 1.52 (.060") SERIES 4.83 (.190") 2.03 (.080") WAVE SOLDER 3.81 (.150") 1.52 (.060") 1.14 (.045") AMP Code The dot is poisitioned before the Packaging Suffix with whole ratings and within the numbering sequence for fractional ratings. Refer to Amp Code column in the Electrical Specifications table. 2.03 (.080") INFARED SOLDER PACKAGING Code Example: 1.5 amp product is 046801.5NRHF (2 amp product shown above). NR = Tape and Reel, 5000 pcs ‘HF’ SUFFIX HALOGEN FREE ITEM Packaging Packaging Option Packaging Specification Quantity Quantity & Packaging Code Tape & Reel – 8mm tape EIA RS-481-1 (IEC 286, part 3) 5000 NR © 2009 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com/series/468.html for current information. 39 Revised: January 7, 2009 468 Series