050702.5MXEP

Axial Lead & Cartridge Fuses 3AB > 507 Series Fuse 507 Series Lead-Free 3AB Fuse RoHS Pb Description A 650VDC rated ceramic fuse in a compact 6.3 x 32mm package, which is well suited for circuit protection in high energy applications. Features • Rated voltage @ 650VDC • Available in cartridge and axial lead version Applications Agency Approvals Agency • RoHS compliant and Lead-free Agency File Number Ampere Range E10480 1A~8A N/A 1A~8A Additional Information • High Voltage DC power application • Inverter • High voltage Power Supplies Electrical Characteristics for Series % of Ampere Rating 100% Datasheet • DC-DC Converter Samples Resources 200% Ampere Rating 1A~8A Opening Time 4 Hours, Minimum 120 Seconds, Maximum Electrical Characteristic Specifications by Item Amp Code Ampere Rating (A) Max. Voltage Rating (V) Interrupting Rating Agency Approvals Nominal Cold Resistance (Ohms) Nominal Melting I2t (A2 sec) 0.37 0.6 x x 001. 1 1.25 1.25 0.23 1.5 x x 01.6 1.6 0.165 2.9 x x 002. 2 0.115 2.3 x x 02.5 2.5 0.083 4.1 x x 3.15 3.15 0.056 9.3 x x 004. 4 0.055 8 x x 005. 5 0.042 12.5 x x 06.3 6.3 0.0285 29 x x 008. 8 0.0207 53 x x 650VDC 150A@650VDC © 2016 Littelfuse, Inc. Application testing is strongly recommended. Specifications are subject to change without notice. Revised: 07/14/16 Axial Lead & Cartridge Fuses 3AB > 507 Series Fuse Average Time Current Curves 1.00A 1.25A 1.60A 2.00A 2.50A 3.15A 4.00A 5.00A 6.30A 8.00A Temperature Re-rating Curve 10000 Time in Seconds 1000 100 10 1 0.1 0.01 0.001 0.1 1 10 100 1000 Current in Amperes Note: Rerating depicted in this curve is in addition to the standard derating of 25% for continuous operation. Soldering Parameters - Wave Soldering Recommended Process Parameters: Wave Parameter 280 260 240 Preheat: 220 (Depends on Flux Activation Temperature) 200 180 160 140 Lead-Free Recommendation (Typical Industry Recommendation) Temperature Minimum: 100°C Temperature Maximum: Preheat Time: 150°C 60-180 seconds 120 100 80 60 Solder Pot Temperature: 260°C Maximum Solder Dwell Time: 2 to 5 seconds 40 Recommended Hand-Solder Parameters: Time (Seconds) Cooling Time Preheat Time Dwell Time © 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 07/14/16 240 230 220 210 200 190 180 170 160 150 140 130 120 110 90 100 80 70 60 50 40 30 0 0 20 20 10 Temperature (°C) - Measured on bottom side of board 300 Solder Iron Temperature: 350°C +/- 5°C Heating Time: 5 seconds max. Note: These devices are not recommended for IR or Convection Reflow process. Axial Lead & Cartridge Fuses 3AB > 507 Series Fuse Product Characteristics Materials Body : Ceramic Cap : Nickel–plated brass Leads : Tin-plated Copper Terminal Strength MIL-STD-202, Method 211, Test Condition A Solderability MIL-STD-202 Method 208 Product Marking Cap1 : Brand logo, current and voltage ratings Cap2 : Series and agency approval marks Operating Temperature: –55ºC to 125ºC. Thermal Shock: MIL-STD-202, Method 107, Test Condition B: (5 cycles -65ºCto +125ºC) Vibration MIL-STD-202, Method 201 Humidity MIL-STD-202, Method 103, Test Condition A: High relative humidity (95%) and elevated temperature (40ºC) for 240 hours Salt Spray MIL-STD-202, Method 101, Test Condition B Part Numbering System Dimensions Measurements displayed in millimeters (inches) 507 000P Series (cartridge) 0507XXX.M X E P 507 000P Series (axial leaded) Series Amp Code 6.35±0.3 (.25") 6.985±0.3 (.275") 31.75±1.12 (1.25") Refer to Amp Code column of Electrical Characteristics Table 32.72±1.12 (1.288") Axial Lead Diameter: 0.81±0.05 (.032") Quantity Code M = 1000 Axial Lead Length: 38.1±3.15 (1.50") TYP. Packaging Code Axial Lead Material: Tin-coated copper Option Codes X = Filler Blank: Cartridge Type Fuse E : Axial Leaded Fuse Lead-Free Packaging Packaging Specification Quantity Quantity & Packaging Code Reel Size Bulk N/A 1000 MX N/A Bulk N/A 1000 MXE N/A Packaging Option 507 Series © 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 07/14/16