0514005.MXP

Axial Lead & Cartridge Fuses 3AB > Fast-Acting > 514 Series 514 Series Lead-Free 3AB, Fast-Acting Fuse RoHS Pb Description The 514 Series fuses are 500VAC rated ceramic fuses with remarkable interrupting rating in a compact 6.3 x 32mm package. They are well suited for circuit protection in high energy applications. Features • Available in cartridge and axial lead form • Compact form factor of 6.3mm x 32mm • Lead-free, Halogen free, and RoHS compliant • High Interrupting Rating Agency Approvals AGENCY CERTIFICATE NUMBER AMPERE RANGE E10480 0.4 - 16A N/A 1.6 - 12.5A Applications High energy and power efficient applications Electrical Characteristics for Series % of Ampere Rating 100% 200% Ampere Rating 1.6A - 12.5A Opening Time 4hours, Min 120 sec, Max Electrical Characteristics Nominal Melting I2t (A2sec) 1.6 214 1.92 X X 002. 2 150 4.12 X X 3.15 3.15 76 5.54 X X 004. 4 49 12.43 X X 63.6 6.14 X X 43 13.5 X X Amp Rating (A) 01.6 005. 5 06.3 6.3 Max. Voltage Rating (V) Agency Approvals Nominal Cold Resistance (mOhm) Amp Code 500VAC Interrupting Rating 5000A @500Vac 008. 8 29 28.8 X X 010. 10 20.2 50.6 X X 12.5 12.5 14.9 114 X X © 2017 Littelfuse, Inc. Application testing is strongly recommended. Specifications are subject to change without notice. Revised: 09/14/17 Axial Lead & Cartridge Fuses 3AB > Fast-Acting > 514 Series 160 10000 1000 120 Time in seconds Percent of Rating 140 3.15A 4A 5A 6.3A 8A 10A 12.5A Average Time Current Curves 1.6A 2A Temperature Re-rating Curve 100 80 60 40 100 10 1 0.1 20 -60 -40 -20 0 20 40 60 80 100 120 Ambient Temperature (°C) 0.01 0.1 1 10 100 1000 Current in Amperes Note: Rerating depicted in this curve is in addition to the standard derating of 25% for continuous operation. Soldering Parameters - Wave Soldering Recommended Process Parameters: Wave Parameter 280 260 240 Preheat: 220 (Depends on Flux Activation Temperature) 200 180 160 140 Lead-Free Recommendation (Typical Industry Recommendation) Temperature Minimum: 100°C Temperature Maximum: Preheat Time: 150°C 60-180 seconds 120 100 80 60 Solder Pot Temperature: 260°C Maximum Solder Dwell Time: 2 to 5 seconds 40 Recommended Hand-Solder Parameters: 240 230 220 210 200 190 180 170 160 150 140 130 120 110 90 100 80 70 60 50 40 30 20 0 10 20 0 Temperature (°C) - Measured on bottom side of board 300 Time (Seconds) Cooling Time Preheat Time Dwell Time Solder Iron Temperature: 350°C +/- 5°C Heating Time: 5 seconds max. Note: These devices are not recommended for IR or Convection Reflow process. Product Characteristics Materials Body : Ceramic Cap : Nickel Plated Brass Leads: Tin-plated copper Terminal Strength MIL-STD-202G, Method 211A, Test condition A Solderability Reference MIL-STD-202 Method 208 Product Marking Cap1 : Brand logo, current and voltage ratings Cap2 : Series and agency approval marks © 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 09/14/17 Operating Temperature –55ºC to +125ºC Thermal Shock MIL-STD-202G, Method 107G, Test condition B: (5 cycles -65ºC to 125ºC) Vibration MIL-STD-202G, Method 201A Moisture Resistance MIL-STD-202G, Method 103B, Test condition A Salt Spray MIL-STD-202G, Method 101E, Test condition B Axial Lead & Cartridge Fuses 3AB > Fast-Acting > 514 Series Dimensions Part Numbering System 514 Series (cartridge) 0514 xxxx M X E P 514 Series (axial leaded) 6.35±0.3 (.25") SERIES AMP Code 6.985±0.3 (.275") 31.75±1.12 (1.25") Refer to Amp Code column of Electrical Characteristics Table 32.72±1.12 (1.288") Axial Lead Diameter: 1.02±0.06 (.04") for 8-12.5A 0.81±0.05(.032") for 1.6-6.3A QUANTITY Code M = 1000 Axial Lead Length: 38.1±3.15 (1.50") TYP. PACKAGING Code Axial Lead Material: Tin-coated copper OPTION Code X = Filler Blank: Catridge Type Fuse E = Axial Leaded Lead-Free Packaging Packaging Option Quantity & Packaging Code Reel Size 1000 MX N/A 1000 MXE N/A Packaging Specification Quantity Bulk N/A Bulk N/A 514 Series Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at www.littelfuse.com/disclaimer-electronics. © 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 09/14/17