0603L300/9SLYR

0603L SL Series Device Specification ELECTRICAL CHARACTERISTICS Part Number Marking I hold (A) 0603L300/9SL Z 3.00 Note: Ihold I trip (A) V max (Vdc) I max (A) Pd max (W) 6.00 9 50 0.60 Maximum Time-to-Trip Current Time (A) (Sec.) 8.00 1.00 Resistance R min (Ω) 0.003 R 1max (Ω) 0.030 = Hold current: maximum current device will pass without tripping in 20℃ still air. Itrip = Trip Current: minimum current at which the device will trip in 20℃ still air. Vmax = Maximum voltage device can withstand without damage at rated current (Imax) Imax = Maximum fault current device can withstand without damage at rated voltage (Vmax) Pd = Power dissipated from device when in the tripped state at 20℃ still air. Rmin = Minimum resistance of device in initial (un-soldered) state. R1max = Maximum resistance of device at 20℃ measured one hour after tripping or reflow soldering of 260℃ for 20 sec. Caution :Operation beyond the specified rating may result in damage and possible arcing and flame. Figure Solder Pad Layout (mm) A C 1.20 Marking D 1.50 B 1.00 E 1.00 PHYSICAL DIMENSIONS (mm) A Part Number 0603L300/9SL 0603L SL Series B C D E Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. 1.40 1.80 0.60 1.00 0.40 1.00 0.15 0.50 -- 0.40 Revision: F THERMAL DERATING CHART – Ihold/Itrip (Amps) Recommended Data Ambient Operation Temperature Part Number -40°C -20°C 0°C 23°C 40°C 50°C 60°C 70°C 85°C Ihold 4.70 4.15 3.60 3.00 2.50 2.20 2.00 1.65 1.20 Itrip 9.50 8.30 7.30 6.00 5.00 4.40 4.00 3.30 2.50 0603L300/9SL AVERAGE TIME-CURRENT CURVE 0603L SL Series Revision: F