0606050.UXTHP

High Current & Voltage Cartridge Fuse High-Current > 606 Series 606 Series High-Current SMD Fuse RoHS Pb Description The 606 series is the smallest cartridge fuse rated at 500VAC with 40A to 63A current ratings and a 2,000A@500Vac interrupting rating. It is designed for supplemental branch circuit (AC input) over-current protection or other stages of power conversion where high voltage is present. This series fuse is RoHS compliant and 100% Pb free. Features • Rated voltage @ 500VAC • 40A~63A rating available Agency Approvals AGENCY AGENCY FILE NUMBER AMPERE RANGE E71611 40A~63A • RoHS compliant and Lead-free • Available in through hole version Applications • Uninterruptible Power Supply (UPS) Electrical Characteristics for Series • Three-phase AC input for charging pile/ Electric Vehicle Supply Equipment (EVSE) % of Ampere Rating Ampere Rating Opening Time 100% 40A~63A 1 Hour, Min. 200% 40A~63A 120 Seconds, Max. • Power conversion equipment such as inverters, rectifiers, etc. • Motor protection in elevator systems Electrical Specifications by Item Ampere Rating (A) Amp Code 40 040. 50 050. 63 063. Max Voltage Rating (V) Interrupting Rating 500Vac 2000A @ 500Vac 10KA @ 250Vac Nominal Cold Resistance (mOhms) Nominal Melting I2t (A2sec) 1.70 2500 Agency Approvals X 1.31 4800 X 1.06 7000 X © 2018 Littelfuse, Inc. Application testing is strongly recommended. Specifications are subject to change without notice. Revised: 01/17/18 High Current & Voltage Cartridge Fuse High-Current > 606 Series Average Time Current Curves 160 606040 606050 606063 Temperature Re-rating Curve 10000 1000 120 100 100 80 Time in second PERCENT OF RATING 140 25°C 60 40 10 1 -60°C -76°F -40°C -40°F -20°C -4°F 0°C 32°F 20°C 68°F 40°C 104°F 60°C 140°F 80°C 176°F 100°C 212°F 120°C 248°F AMBIENT TEMPERATURE 0.1 Note: 1. Rerating depicted in this curve is in addition to the standard derating of 25% for continuous operation. 0.01 0.001 1 10 100 1000 Current in Amperes Soldering Parameters - Wave Soldering Recommended Process Parameters: 280 260 Wave Parameter 240 220 Preheat: 200 (Depends on Flux Activation Temperature) 180 160 140 120 100 80 60 40 Time (Seconds) Cooling Time Preheat Time Dwell Time © 2018 Littelfuse, Inc. Application testing is strongly recommended. Specifications are subject to change without notice. Revised: 01/17/18 240 230 220 210 200 190 180 170 160 150 140 130 120 110 90 100 80 70 60 50 40 30 20 0 10 20 0 Temperature (°C) - Measured on bottom side of board 300 Lead-Free Recommendation (Typical Industry Recommendation) Temperature Minimum: 100°C Temperature Maximum: Preheat Time: 150°C 60-180 seconds Solder Pot Temperature: 260°C Maximum Solder Dwell Time: 2-5 seconds Recommended Hand-Solder Parameters: Solder Iron Temperature: 350°C +/- 5°C Heating Time: 5 seconds max. Note: These devices are not recommended for IR or Convection Reflow process. High Current & Voltage Cartridge Fuse High-Current > 606 Series Product Characteristics Materials Body: Melamine Caps: Copper alloy Leads: Tin-plated copper alloy Operating Temperature -55ºC to +125ºC Terminal Strength MIL-STD-202, Method 211 Test condition A Thermal Shock MIL-STD-202, Method 107 Test condition B (5 cycles -65ºC to 125ºC) Solderability Reference MIL-STD-202 method 208 Vibration MIL-STD-202, Method 201 Product Marking Cap1: Brand logo, Current and Voltage ratings Cap2: Series and agency approval Marks Moisture Resistance MIL-STD-202, Method 103 Test condition A Salt Spray MIL-STD-202, Method 101Test condition B Part Numbering System Part Numbering System Unit in mm 0606 XXX. U X TH P 33.40 12.25 SERIES AMP Code* 19.30 Refer to Amp Code column of Electrical Characteristics Table QUANTITY Code U = 500 Pieces .50 PACKAGING Code X = Filler 6.30 8.80 11.30 24.5±0.80 OPTION Code TH=Through Hole Assembly Fuse 25.80 P: LEAD-FREE 11.80 23.20 1.30 3.00 Recommended Drilling Pattern 4oz (140μm) minimum Cu layer for 40A and 50A 6oz (210μm) minimum Cu layer for 63A Packaging Packaging Option Packaging Specification Quantity Quantity & Packaging Code Reel Size Tray N/A 500 UXTH N/A Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at www.littelfuse.com/disclaimer-electronics. © 2018 Littelfuse, Inc. Application testing is strongly recommended. Specifications are subject to change without notice. Revised: 01/17/18