088501.6DR

Surface Mount Fuses NANO2® > 500 VDC Rated Fuse > 885 Series 885 Series Fuse Pb RoHS Description The 885 Nano2® Surface Mount Fuses are high voltage rated fuses with high interrupting current ratings at 450VDC/500VDC and 350VAC. It complies with IEC 60127-7 Standard. Features • Heat resistant plastic housing, UL 94 V-0 • High pulse resistance • Lead-free -- compatible with lead-free solders and higher temperature profiles • Meets Littelfuse's Automotive qualifications* Agency Approvals • Low voltage drop AGENCY • Internationally approved AGENCY FILE NUMBER AMPERE RANGE E10480 1A–5A R50395911 1A–5A • Available in ratings of 1A to 5A * Largely based on Littelfuse internal AECQ-200 test plan Applications • Automotive Electrical Characteristics for Series % of Ampere Rating Additional Information Opening Time 125% 1 hour, Minimum 200% 2 minutes, Maximum 1000% 1 second, Maximum Datasheet Resources Samples Electrical Specifications by Item Ampere Rating (A) Amp Code 1.00 001. 1.25 1.25 1.60 01.6 2.00 002. 2.50 02.5 3.15 3.15 4.00 004. 5.00 005. Max Voltage Rating (V) 500 450 Agency Approvals Nominal Cold Resistance (Ohms) 1 Nominal Melting I2t (A2sec) Nominal Voltage Drop (mV) Nom Power Dissipation (mW) 0.0780 0.80 105 105 X X 0.0630 1.25 105 131 X X 0.0473 2.30 98 157 X X 0.0322 4.70 91 182 X X 1500A @ 125VDC 100A @ 500VDC 100A @ 350VAC 0.0267 6.90 88 220 X X 0.0196 13.35 79 249 X X 1500A @ 125VDC 100A @ 450VDC 100A @ 350VAC 0.0152 21.30 79 316 X X 0.0119 35.00 79 395 X X Interrupting Rating 1500A @ 350VDC 100A @ 500VDC 100A @ 350VAC Notes: 1. Cold resistance measured at less than 10% of rated current at 23°C. 2. l2t values slated for 10xIn opening time 3. If you have special electrical characteristic needs, please contact Littelfuse to discuss application specific options. © 2018 Littelfuse, Inc. Application testing is strongly recommended. Specifications are subject to change without notice. Revised: 02/05/18 Surface Mount Fuses NANO2® > 500 VDC Rated Fuse > 885 Series Average Time Current Curves 1A 1.25A 1.6A 2A 2.5A 3.15A 4A 5A Temperature Re-rating Curve 1000 100 Time in Seconds (S) 10 1 0.1 Note: 1. Rerating depicted in this curve is in addition to the standard derating of 25% for continuous operation. 0.01 0.001 0.1 1 10 1000 100 Current in Amperes (A) Soldering Parameters Pre Heat Pb – Free assembly - Temperature Min (Ts(min)) 150°C - Temperature Max (Ts(max)) 200°C - Time (Min to Max) (ts) 60 – 120 secs Average ramp up rate (Liquidus Temp (TL) to peak 5°C/second max. TS(max) to TL - Ramp-up Rate 5°C/second max. Reflow - Temperature (TL) (Liquidus) 217°C - Temperature (tL) 60 – 90 seconds Peak Temperature (TP) 260+0/–5 °C Time within 5°C of actual peak Temperature (tp) 20 – 40 seconds Ramp-down Rate 5°C/second max. Time 25°C to peak Temperature (TP) 8 minutes max. Do not exceed 260°C Wave Soldering Parameters 260°C Peak Temperature, 3 seconds max. © 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 02/05/18 tP TP Critical Zone TL to TP Ramp-up TL TS(max) Temperature Reflow Condition tL Ramp-down TS(min) 25 Preheat tS time to peak temperature (t 25ºC to peak) Time Surface Mount Fuses NANO2® > 500 VDC Rated Fuse > 885 Series Product Characteristics Materials Body: Plastic UL 94 V-0 Cap: Tin Plated Brass Operating Temperature –40°C to +85°C with proper derating Product Marking Body: Brand Logo, Current Rating, Voltage Rating, Series, Date Code Climatic Category IEC60068-1, -2-1, -2-2, -2-78 (–40°C to +85°C/21 days) Solderability JESD22-B102E Method 1 Vibration MIL-STD-202 Method 201 and 204 Resistance to Soldering Heat MIL-STD-202 Method 210 Test Condition K Moisture Sensitivity Level J-STD-020, Level 1 Part Numbering System Dimensions 2.8±0.1mm 2.8±0.1mm 0885 001 D R SERIES 1A 4.78±0.1 LF 885 F0417 500V AMP Code Refer to Electrical characteristics table QUANTITY Code 10.86±0.23mm 4.78±0.1 D = 1500 pcs PACKAGING Code Recommended Pad Layout 4.9+.05/-0 5.6+.05/-0 7.23+.05/-0 5.6+.05/-0 R = Tape and Reel Thickness of the layer: Cu 35μm±1,8μm Packaging Packaging Option Packaging Specification Quantity Quantity & Packaging Code Tape and Reel EIA-481-D 1500 D Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at www.littelfuse.com/disclaimer-electronics. © 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 02/05/18