0LMF001.H

POWR-GARD® Fuse Datasheet 2.25" 0.263" 7/8" lgr • lmf in-line Fuses and lhr holders 3/4" 0.423" 0.50" Knock-out Hole 0.50" 2.25" Specifications Fast-Acting  •  300 VAC Voltage Rating 300 VAC Maximum Interrupting Rating 10 kA Approvals Standard 248-14 UL Listed (File: E10480) 0.263" 7/8" CSA Certified (File: LR29862) Used as in-line protection for fluorescent fixtures, this fast-acting fuse is ideal for increasing the safety and reliability of lighting fixtures.3/4" Ordering Information 0.630" / 1 Hole Knock-out 1 1/2 1 2 0.610" 1.82" 0.610" LMF Fuses ampere ratings 1 6/10 0.423" 3 6 2Keyhole Punch 4 7 2 1/2 5 8 series amperage LGR 5 9 10 12 15 — — Catalog Number Ordering Number LGR005 0LGR005.V Specifications Time-Delay  •  300 VAC 1.82" Perfect for use in lighting 0.610" systems, this 300 VAC timedelay fuse is designed to handle ballast transformer 1.82" in-rush currents. Voltage Rating 300 VAC Maximum In­ter­rupt­ing Rating 10 kA Approvals Standard 248-14 UL Listed (File: E10480) CSA Certified (File: LR29862) Ordering Information / 1/2 6/10 3 10 0.610" 1.82" series LMF / 1 1 1/4 8 10 Specifications Used as in-line protection for fluorescent fixtures, the Littelfuse LGR and LMF series fuses and LHR holder offer increased safety and reliability to lighting systems. Voltage Rating 2.25" Ampere Rating Fuse holders are rated up to 10 amperes at0.50" 300 volts and are equipped with 7" 18 AWG leads. Order part number LHR000 for two leads, and part number LHR001 for one lead; with the other terminal used for insertion of 18 AWG ballast lead. 1 of 1 ampere ratings 1 6/10 2 8/10 2 3 2 1/2 3 2/10 amperage 5 LHR Fuse Holder By individually fusing fixtures, electrical problems are 2.25" isolated from the rest of the circuit. The added benefits of this is the ability to quickly identify the problem fixture and reduce the repair time. Littelfuse.com Keyhole Punch LGR Fuses 0.50" 0.50" 0.630" 4 5 6 1/4 7 8 10 Catalog Number Ordering Number LMF005 0LMF005.V 300 VAC LHR000 10 A LHR001 10 A Approvals UL Recognized CSA Certified (File: 73160) 0.50" UL94 V-0 Flammability Rating Example part number LHR001 0.50" Ordering number 0LHR0001T 7/8" 3/4" 0.42 Knock-out Hole Knock-out Hole 0.263" 7/8" Mounting Information 0.630" 3/4" LHR001/LHR000 will fit keyhole punch 0.50" or 0.875" knock-out hole. Anti-ro­ta­tion fea­ture is pro­vid­ed Knock-out Hole when used with key­hole punch. A “U-shaped” clip is avail­able for panel mount­ing (pack­aged 10 clips per bag): Order part 0.610" number LHROCA. Keyhole 0.423" Keyhole KeyholePunch Punch 2.25" 3/4" 0.50" Kno 0.50" 1.82"Littelfuse POWR-GARD® Products © 2020 Rev: 4-A-040720