1210L150PR

POLYFUSE® Resettable PTCs Surface Mount > 1210L Series 1210L Series Description The 1210L Series device provides surface mount overcurrent protection for applications where space is at a premium and resettable protection is desired. Agency Approvals AGENCY t

-PX
SFTJTUBODF t

-PXQSPmMF t

$PNQBUJCMF
XJUI
IJHI
temperature solders t

3P)4
DPNQMJBOU
BOE


lead-free t

'BTU
SFTQPOTF
UP
GBVMU
currents t

$PNQBDU
EFTJHO
TBWFT
board space AGENCY FILE NUMBER Applications E183209 t

64#
QFSJQIFSBMT t

%JTL
ESJWFT t

$%30.T t

1$
NPUIFSCPBSET

QMVH
and play protection R50119118 t

.PCJMF
QIPOFT

CBUUFSZ
and port protection t

1%"T

EJHJUBM
DBNFSBT t

(BNF
DPOTPMF
QPSU
protection Electrical Characteristics I trip (A) V max (Vdc) I max (A) Pd max. (W) Maximum Time To Trip Part Number Marking I hold (A) 1210L005 A 0.05 0.15 30 10 1210L010 B 0.10 0.30 30 1210L020 C 0.20 0.40 1210L035 E 0.35 1210L050 F 1210L075 G 1210L110 H 1.10 2.20 6 100 0.60 8.00 0.30 1210L150 K 1.50 3.00 6 100 0.80 8.00 0.50 Agency Approvals Resistance Current (A) Time (Sec.) R min (Ω) R typ (Ω) R 1max (Ω) 0.60 0.25 1.50 3.600 25.00 50.00 X X 10 0.60 0.50 1.50 1.600 7.000 15.00 X X 30 10 0.60 8.00 0.02 0.800 2.900 5.000 X X 0.70 6 100 0.60 8.00 0.20 0.320 0.810 1.300 X X 0.50 1.00 13.2 100 0.60 8.00 0.10 0.250 0.550 0.900 X X 0.75 1.50 6 100 0.60 8.00 0.10 0.130 0.290 0.400 X X 0.060 0.140 0.210 X X 0.040 0.070 0.110 X X I hold = Hold current: maximum current device will pass without tripping in 20°C still air. R typ = Typical resistance of device in initial (un-soldered) state. I trip = Trip current: minimum current at which the device will trip in 20°C still air. R 1max = Maximum resistance of device at 20°C measured one hour after tripping or reflow soldering of 260°C for 20 sec. V max = Maximum voltage device can withstand without damage at rated current (I max) I max = Maximum fault current device can withstand without damage at rated voltage (Vmax) P d = Power dissipated from device when in the tripped state at 20°C still air. Caution: Operation beyond the specified rating may result in damage and possible arcing and flame. R min = Minimum resistance of device in initial (un-soldered) state. ©2008 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com/series/1210L.html for current information. Revised: October 24, 2008 1210L Series 1210L Series Features POLYFUSE® Resettable PTCs Surface Mount > 1210L Series Temperature Rerating Ambient Operation Temperature -40°C -20°C 0°C 23°C 1210L005 0.08 0.07 0.06 0.05 1210L010 0.16 0.14 0.12 0.10 1210L020 0.29 0.26 0.22 0.20 0.16 0.14 1210L035 0.47 0.45 0.40 0.35 0.33 0.28 1210L050 0.76 0.67 0.58 0.50 0.43 0.40 1210L075 1.00 0.97 0.86 0.75 0.64 1210L110 1.69 1.48 1.29 1.10 1210L150 2.13 1.92 1.71 1.50 Part Number 50°C 60°C 70°C 85°C 0.04 0.04 0.03 0.03 0.02 0.08 0.07 0.06 0.05 0.03 0.13 0.11 0.08 0.24 0.21 0.18 0.36 0.32 0.28 0.59 0.54 0.48 0.40 0.88 0.76 0.65 0.57 0.43 1.26 1.14 1.01 0.89 0.71 Hold Current (A) Average Time Current Curves Temperature Rerating Curve 0.05A 0.10A 0.20A 0.35A 0.50A 0.75A 1.10A 1.50A 170% 10000 1000 Percentage of Rated Current 150% 1210L 100000 Time in Seconds 40°C 130% 110% 90% 70% 50% 30% 10% 100 -40 -30 -20 -10 0 10 20 30 40 Temperature (°C) 50 60 70 80 85 10 1 0.1 0.01 0.1 1 10 100 Current in Amperes The average time current curves and Temperature Rerating curve performance is affected by a number or variables, and these curves provided as guidance only. Customer must verify the performance in their application. 1210L Series Revised: October 24, 2008 ©2008 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com/series/1210L.html for current information. POLYFUSE® Resettable PTCs Surface Mount > 1210L Series Soldering Parameters Reflow Peak Temp/ Duration Time 260°C / 10 Sec Time above liquids (TAL) 220°C 60 Sec ~ 100 Sec Storage Condition 50 Sec ~ 150 Sec 0°C~35°C, < =70%RH t

3FDPNNFOEFE
SFnPX
NFUIPET
*3
WBQPS
QIBTF
PWFO
IPU
BJS
oven, N2 environment for lead–free t

3FDPNNFOEFE
NBYJNVN
QBTUF
UIJDLOFTT
JT
NN

JODI t

%FWJDFT
DBO
CF
DMFBOFE
VTJOH
TUBOEBSE
JOEVTUSZ
NFUIPET
BOE
solvents. Note: If reflow temperatures exceed the recommended profile, devices may not meet the performance requirements. Physical Specifications Cooling 220 Temperature (°C) Preheat 120°C~ 180°C Soldering 260 Preheating 180 120 0 50 to 150 60 to 100 1210L Series Condition 120 Time(s) Environmental Specifications Terminal Material Solder-Plated Copper (Solder Material: Matte Tin (Sn)) Operating/Storage Temperature -40°C to +85°C Lead Solderability Meets EIA Specification RS186-9E, ANSI/J-STD-002 Category 3. Maximum Device Surface Temperature in Tripped State 125°C Passive Aging +85°C, 1000 hours -/+5% typical resistance change Humidity Aging +85°C, 85, R.H.,1000 hours -/+5% typical resistance change Thermal Shock MIL–STD–202, Method 107G +85°C/-40°C, 20 times -30% typical resistance change Solvent Resistance MIL–STD–202, Method 215 No change Vibration MIL–STD–883C, Method 2007.1, Condition A No change Moisture Level Sensitivity Level 2, J–STD–020C ©2008 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com/series/1210L.html for current information. Revised: October 24, 2008 1210L Series POLYFUSE® Resettable PTCs Surface Mount > 1210L Series Dimensions MARKING CODE VARIES WITH AMPERAGE RATING (See Electrical Characteristics Table) SHOWN IS 1.5AMP RATING C A Top View K Bottom View K Side View B 2.00 mm (.079) Pad Layout D 2.50 mm (.098) E 1.00 mm (.040) A Part Number Inches B mm Inches C mm Inches D mm E Inches mm Inches Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. Min. Min. 0.12 0.01 0.25 0.008 0.02 1210L005 0.14 3.00 3.43 0.09 0.11 2.35 2.80 0.03 0.05 0.75 1.25 mm Min Max. Min. Max. 0.20 0.50 1210L010 0.12 0.14 3.00 3.43 0.09 0.11 2.35 2.80 0.03 0.05 0.75 1.25 0.01 0.25 0.008 0.02 0.20 0.50 1210L020 0.12 0.14 3.00 3.43 0.09 0.11 2.35 2.80 0.02 0.04 0.60 1.00 0.01 0.25 0.008 0.02 0.20 0.50 1210L035 0.12 0.14 3.00 3.43 0.09 0.11 2.35 2.80 0.02 0.03 0.50 0.85 0.01 0.25 0.008 0.02 0.20 0.50 1210L050 0.12 0.14 3.00 3.43 0.09 0.11 2.35 2.80 0.02 0.03 0.50 0.85 0.01 0.25 0.008 0.02 0.20 0.50 1210L075 0.12 0.14 3.00 3.43 0.09 0.11 2.35 2.80 0.02 0.03 0.50 0.85 0.01 0.25 0.008 0.02 0.20 0.50 1210L110 0.12 0.14 3.00 3.43 0.09 0.11 2.35 2.80 0.04 0.05 0.90 1.30 0.01 0.25 0.008 0.02 0.20 0.50 1210L150 0.12 0.14 3.00 3.43 0.09 0.11 2.35 2.80 0.03 0.07 0.80 1.80 0.01 0.25 0.008 0.02 0.20 0.50 Part Ordering Number System 1210 L 110 W R PACKAGING STYLE R: Tape & Reel SERIES QUANTITY CODE: W=3000 Y=4000 P=2000 I HOLD HOLD CURRENT CODE (SEE TABLE BELOW) L: LITTELFUSE SURFACE MOUNT PPTC SIZE Packaging Part Number Ordering Number I hold (A) I hold Code Packaging Option Quantity Quantity & Packaging Codes 1210L005 1210L005WR 0.05 005 Tape and Reel 3000 WR 1210L010 1210L010WR 0.10 010 Tape and Reel 3000 WR 1210L020 1210L020WR 0.20 020 Tape and Reel 3000 WR 1210L035 1210L035YR 0.35 035 Tape and Reel 4000 YR 1210L050 1210L050YR 0.50 050 Tape and Reel 4000 YR 1210L075 1210L075YR 0.75 075 Tape and Reel 4000 YR 1210L110 1210L110WR 1.10 110 Tape and Reel 3000 WR 1210L150 1210L150PR 1.50 150 Tape and Reel 2000 PR 1210L Series Revised: October 24, 2008 ©2008 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com/series/1210L.html for current information. POLYFUSE® Resettable PTCs Surface Mount > 1210L Series Tape and Reel Specifications TAPE SPECIFICATIONS: EIA-481-1 (mm) 1210L005, 1210L010, 1210L020, 1210L110 1210L150 REEL DIMENSIONS: EIA-481-1 (mm) W 8.0+/- 0.30 8.0+/- 0.30 8.0+/- 0.30 H 12.0+/- 0.05 F 3.5+/- 0.05 3.5+/- 0.05 3.5+/- 0.05 W 9.0+/- 0.5 E1 1.75+/- 0.10 1.75+/- 0.10 1.75+/- 0.10 D Ø 60+0.5 D0 1.55+/- 0.05 1.55+/- 0.05 1.55+/- 0.05 F Ø 13.0+/- 0.2 D1 1.0 (min) 1.0 (min) 1.0 (min) C Ø 178+/- 1.0 P0 4.0+/- 0.10 4.0+/- 0.10 4.0+/- 0.10 H1 11+/- 0.5 P1 4.0+/- 0.10 4.0+/- 0.10 4.0+/- 0.10 W1 2.2+/- 0.5 P2 2.0+/- 0.05 2.0+/- 0.05 2.0+/- 0.05 W2 3.0+0.5 A0 2.82+/- 0.10 2.82+/- 0.10 2.67+/- 0.10 W3 4.0+0.5 B0 3.46+/- 0.10 3.46+/- 0.10 3.36+/- 0.10 W4 5.5+0.5 T 0.25+/- 0.10 0.25+/- 0.10 0.25+/- 0.10 K0 1.00+/- 0.10 1.30+/- 0.10 1.65+/- 0.10 Leader min. 390 390 390 Trailer min. 160 160 160 1210L Series 1210L035, 1210L050, 1210L075 Tape and Reel Diagram H P1 P2 D0 E1 P0 W4 W3 D F W T W2 W F D2 C W1 A0 K0 ©2008 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com/series/1210L.html for current information. H1 B0 Revised: October 24, 2008 1210L Series