16R800GF

POLY-FUSE® Resettable PPTCs Radial Leaded > 16R Series 16R Series RoHS Description  ittelfuse 16R Series Radial Leaded PTCs are designed to L provide resettable overcurrent protection serving a wide range of electronics applications. With maximum 16 volts and maximum 100-ampere short circuit rating, they offer an ideal solution for USB protection. Features • 100A short circuit rating • 16V Operating voltages • Fast time–to–trip • Meets all USB protection requirements • RoHS compliant, Lead- Free and Halogen-Free* Applications • Computers & peripherals • Any USB application • General Electronics Agency Approvals Agency Agency File Number E183209 Additional Information R50119318 Datasheet Resources Samples Electrical Characteristics Part Number I hold (A) I trip (A) V max (Vdc) I max (A) Pd typ. (W) Maximum Time To Trip Current Time (A) (Sec.) Resistance R min R 1max (Ω) (Ω) Agency Approvals 16R250G 2.5 4.7 16 100 1.0 12.5 5.0 0.0220 0.0530 X X 16R300G 3.0 5.1 16 100 2.3 15.0 1.0 0.0380 0.0975 X X 16R400G 4.0 6.8 16 100 2.4 20.0 1.7 0.0210 0.0600 X X 16R500G 5.0 8.5 16 100 2.6 25.0 2.0 0.0150 0.0340 X X 16R700G 7.0 11.9 16 100 3.0 35.0 3.5 0.0077 0.0200 X X 16R800G 8.0 13.6 16 100 3.0 40.0 5.0 0.0056 0.0175 X X 16R900G 9.0 15.3 16 100 3.3 45.0 5.5 0.0047 0.0135 X X 16R1000G 10.0 17.0 16 100 3.6 50.0 6.0 0.0040 0.0102 X X 16R1400G 14.0 23.8 16 100 4.6 70.0 9.0 0.0026 0.0064 X X CAUTION: Operation beyond the specified rating may result in damage and possible arcing and flame. I hold = Hold current: maximum current device will pass without tripping in 20°C still air. I trip = Trip current: minimum current at which the device will trip in 20°C still air. Vint = Maximum voltage the device can withstand without damage at rated current (I max) Vop = The device regular operation voltage I max = Maximum fault current device can withstand without damage at rated voltage (Vmax) P d = Power dissipated from device when in the tripped state at 20°C still air. R min = Minimum resistance of device in initial (un-soldered) state. R typ = Typical resistance of device in initial (un-soldered) state. R 1max = Maximum resistance of device at 20°C measured one hour after tripping. * Effective February 11, 2010 onward, all 600R PTC products will be manufactured Halogen Free (HF). Existing Non-Halogen Free 600R PTC products may continue to be sold, until supplies are depleted. This change will have no effect on 600R product specifications or performance. WARNING • Users shall independently assess the suitability of these devices for each of their applications • Operation of these devices beyond the stated maximum ratings could result in damage to the devices and lead to electrical arcing and/or fire • These devices are intended to protect against the effects of temporary over-current or over-temperature conditions and are not intended to perform as protective devices where such conditions are expected to be repetitive or prolonged in duration • Exposure to silicon-based oils, solvents, electrolytes, acids, and similar materials can adversely affect the performance of these PPTC devices • These devices undergo thermal expansion under fault conditions, and thus shall be provided with adequate space and be protected against mechanical stresses • Circuits with inductance may generate a voltage (L di/dt) above the rated voltage of the PPTC device. © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: BO.12/07/20 POLY-FUSE® Resettable PPTCs Radial Leaded > 16R Series Temperature Rerating Ambient Operation Temperature -40°C -20°C 0°C 20°C Part Number 40°C 50°C 60°C 70°C 85°C Hold Current (A) 16R250G 3.7 3.3 2.9 2.5 2.2 2.0 1.8 1.6 1.3 16R300G 4.4 4.0 3.5 3.0 2.6 2.4 2.1 1.9 1.6 16R400G 5.9 5.3 4.7 4.0 3.5 3.2 2.9 2.6 2.1 16R500G 7.4 6.6 5.9 5.0 4.4 4.0 3.6 3.2 2.6 16R700G 10.4 9.3 8.2 7.0 6.1 5.6 5.0 4.5 3.7 16R800G 11.8 10.6 9.4 8.0 7.0 6.3 5.7 5.1 4.2 16R900G 13.3 12.0 10.6 9.0 7.8 7.1 6.5 5.8 4.7 16R1000G 14.8 13.3 11.8 10.0 8.7 7.9 7.1 6.4 5.3 16R1400G 20.7 18.6 16.5 14.0 12.2 11.1 10.0 9.0 7.4 Temperature Rerating Curve 14.0 A 7.0 A 8.0 A 9.0 A 10.0 A 2.5 A 3.0 A 4.0 A 5.0 A Average Time Current Curves 170% 150% Percentage of Rated Current Time in Hectoseconds (100 Seconds) 1 0.1 130% 110% 90% 70% 50% 30% 0.01 10% -40 -30 -20 0 10 20 30 40 Temperature (°C) 50 60 70 80 Note: Typical Temperature rerating curve, refer to table for derating data 0.001 0.0001 -10 1 10 100 1000 Current in Amperes The average time current curves and Temperature Rerating curve performance is affected by a number or variables, and these curves provided as guidance only. Customer must verify the performance in their application. © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: BO.12/07/20 POLY-FUSE® Resettable PPTCs Radial Leaded > 16R Series Soldering Parameters - Wave Soldering Refer to the condition recommended by the flux manufacturer. Max. ramping rate should not exceed 4°C/Sec. Soldering Zone Max. solder temperature should not exceed 260°C. Time within 5°C of actual Max. solder temperature within 3 - 5 seconds. Total time from 25°C room to Max. solder temperature within 5 minutes including Pre-Heating time. Cooling Zone Cooling by natural convection in air. Max. ramping down rate should not exceed 6°C/Sec. Soldering 260 Cooling 255 Temperature(°C) Pre-Heating Zone Preheating 125 100 25 5 max. 60 - 180 Time(s) Environmental Specifications Physical Specifications Lead Material Soldering Characteristics Insulating Material Device Labeling 2.5A: Tin-plated Copper clad Steel 3.0 - 14.0A: Tin-plated Copper Solderability per MIL–STD–202, Method 208 Cured, flame retardant epoxy polymer meets UL94V-0 requirements. Marked with ‘LF’, voltage, current rating, and date code. -40°C to +85°C Operating/Storage Temperature Maximum Device Surface Temperature in Tripped State 125°C +85°C, 1000 hours -/+5% typical resistance change +85°C, 85% R.H., 1000 hours -/+5% typical resistance change +85°C to -40°C 10 times -/+5% typical resistance change MIL–STD–202, Method 215 No change Level 1, J–STD–020 Passive Aging Humidity Aging Thermal Shock Solvent Resistance Moisture Resistance Level Dimensions & Part Marking System Figure 1 A Figure 2 E Single Sided Marking E A Littelfuse Trademark B Part Figure Number 16R250G 16R300G 16R400G 16R500G 16R700G 16R800G 16R900G 16R1000G 16R1400G 2 1 1 1 1 1 1 1 1 A Inches Max. 0.35 0.28 0.35 0.41 0.44 0.50 0.55 0.65 0.93 D Inches Max. 0.50 0.43 0.50 0.56 0.78 0.82 0.85 0.99 1.10 C F B mm Max. 8.90 7.10 8.90 10.40 11.20 12.70 14.00 16.50 23.50 C mm Max. 12.80 11.00 12.80 14.30 19.70 20.90 21.70 25.20 27.90 Voltage Rating Current Rating Date Code (Contact Littelfuse for additional information) B D C 16 250G XXXX Inches Typ. 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.40 mm Typ. 5.1 5.1 5.1 5.1 5.1 5.1 5.1 5.1 10.2 D Inches mm Min. Min. 0.13 3.18 0.30 7.6 0.30 7.6 0.30 7.6 0.30 7.6 0.30 7.6 0.30 7.6 0.30 7.6 0.30 7.6 F E Inches Max. 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.14 F mm Max. 3.00 3.00 3.00 3.00 3.00 3.00 3.00 3.00 3.50 Inches Typ. 0.035 0.047 0.047 0.047 0.047 0.047 0.047 0.047 0.055 mm Typ. 0.9 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.4 Physical Characteristics Lead (dia) Material Inches mm 0.020 0.51 Sn/CuFe 0.032 0.81 Sn/Cu 0.032 0.81 Sn/Cu 0.032 0.81 Sn/Cu 0.032 0.81 Sn/Cu 0.032 0.81 Sn/Cu 0.032 0.81 Sn/Cu 0.032 0.81 Sn/Cu 0.039 1.00 Sn/Cu © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: BO.12/07/20 POLY-FUSE® Resettable PPTCs Radial Leaded > 16R Series Part Ordering Number System 16 R 700 G KL M R Packaging Style Blank: Bulk R: Tape & Ammo Series Quantity Code: F=200 H=100 M=1000 P=2000 U=500 Kinked Lead Device Option Identifier (16R700GKL product only) Type: G (16vdc) IHold Current Code (See Table Below) R: Radial Voltage Rating (Vdc) Packaging Options Part Number Ordering Number 16R250G 16R250GU 16R300GU 16R300GPR 16R400GU 16R400GPR 16R500GU 16R500GPR 16R700GMR 16R800GF 16R900GF 16R900GMR 16R1000GMR 16R1400GH 16R300G 16R400G 16R500G 16R700G 16R800G 16R900G 16R1000G 16R1400G I hold (A) 2.50 I hold Code Packaging Option Quantity Quantity & Packaging Codes 250 Bulk Bulk Tape and Ammo Bulk Tape and Ammo Bulk Tape and Ammo Tape and Ammo Bulk Bulk Tape and Ammo Tape and Ammo Bulk 500 500 2000 500 2000 500 2000 1000 200 200 1000 1000 100 U U PR U PR U PR MR F F MR MR H 3.00 300 4.00 400 5.00 500 7.00 8.00 700 800 9.00 900 10.00 14.00 1000 1400 WARNING • Users shall independently assess the suitability of these devices for each of their applications • Operation of these devices beyond the stated maximum ratings could result in damage to the devices and lead to electrical arcing and/or fire • These devices are intended to protect against the effects of temporary over-current or over-temperature conditions and are not intended to perform as protective devices where such conditions are expected to be repetitive or prolonged in duration • Exposure to silicon-based oils, solvents, electrolytes, acids, and similar materials can adversely affect the performance of these PPTC devices • These devices undergo thermal expansion under fault conditions, and thus shall be provided with adequate space and be protected against mechanical stresses • Circuits with inductance may generate a voltage (L di/dt) above the rated voltage of the PPTC device. © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: BO.12/07/20 POLY-FUSE® Resettable PPTCs Radial Leaded > 16R Series Tape and Ammo Specifications Devices taped using EIA468-B/IE286-2 standards. See table below and Figure 1 for details. Dimension EIA Mark IEC Mark Carrier tape width W Hold down tape width: Dimensions Dim. (mm) Tol. (mm) W 18 -0.5 /+1.0 W4 W0 11 min. Top distance between tape edges W6 W2 3 max. Sprocket hole position W5 W1 9 -0.5 /+0.75 Sprocket hole diameter* D0 D0 4 -0.32 /+0.2 Abscissa to plane(straight lead) H H 18.5 -/+ 3.0 Abscissa to plane(kinked lead) H0 H0 16 -/+ 0.5 Abscissa to top - - 45.0 max. Overall width w/o lead protrusion - - 56 max. Overall width w/ lead protrusion - - 57 max. Lead protrusion L1 l1 1.0 max. Protrusion of cut out L L 11 max. Protrusion beyond hold-down tape l2 l2 Not specified Sprocket hole pitch P0 P0 25.4 Device pitch: - - 25.4 Pitch tolerance - - 20 consecutive. -/+ 1 Tape thickness t t 0.9 max. Tape thickness with splice t1 - 2.0 max. Splice sprocket hole alignment -/+ 0.5 - - 0 -/+ 0.3 Body lateral deviation Δh Δh 0 -/+ 1.0 Body tape plane deviation Δp Δp 0 -/+ 1.3 Ordinate to adjacent component lead* P1 P1 3.81 -/+ 0.7 Ordinate to adjacent component lead* - - 7.62 -/+ 0.7 Lead spacing:16R250G-16R1000G F F 5.08 -/+ 0.8 Lead spacing:16R1400G F F 10.18 -/+ 0.8 *Differs from EIA specification Tape and Ammo Diagram ∆h Figure 1 ∆h ∆h ∆p Reference plane A1 H1 H1 C1 H C2 F A L B H0 W4 W5 W I2 L1 P0 D0 Direction of unreeling Cross section A - B t Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at www.littelfuse.com/disclaimer-electronics. Reel © 2020 Littelfuse, Inc. Specifications are subject change without notice. Uppertoside Revised: BO.12/07/20 Tape