20101000021P

Cartridge and Axial Lead Fuses 5×20mm > Medium Acting > 201P Series 201P Series, 5×20mm, Medium–Acting Fuse RoHS Pb Description The 201P Series is a 5×20mm Medium–Acting, Time-lag, Glass Body Cartridge Fuse. Features • Visual fault indication • Worldwide availability • Direct solderable or plug-in versions • RoHS compliant and Lead-free Applications Used as supplementary protection in appliance or utilization equipment to provide individual protection for components or internal circuits. Agency Approvals Agency Agency File Number Ampere Range E67006 0.050A-1.25A Electrical Characteristics for Series Additional Information Datasheet Resources Samples % of Ampere Rating Opening Time 150 1 Hour Minimum 210 600 s Maximum Accessories 400 40 ms Minimum 2 s Maximum 1000 5 ms Minimum 90 ms Maximum For recommended fuse accessories for this product series, see ‘Recommended Accessories’ section. Electrical Characteristic Specifications by Item Amp Code Amp Rating Voltage Rating 0050 0.050 250V 0063 0.063 250V 0080 0.080 250V Interrupting Rating Nominal Resistance Cold Ohms (mohms) Nominal Melting Integral 10 x IN (A2s) Voltage Drop 1.0 x IN max. (mV) Power Dissipation 1.5 x IN max. (W) Agency Approvals 9200 0.00900 640 0.10000 x 7400 0.01100 600 0.10000 x 5330 0.01700 540 0.20000 x 0100 0.100 250V 3550 0.03100 500 0.20000 x 0125 0.125 250V 2650 0.05700 440 0.20000 x 0160 0.160 250V 1780 0.08500 400 0.20000 x 0200 0.200 250V 1250 0.12000 340 0.30000 x 0250 0.250 250V 870 0.13000 320 0.30000 x 80A @ 250VAC 0315 0.315 250V 590 0.16000 300 0.30000 x 0400 0.400 250V 435 0.28000 230 0.40000 x 0500 0.500 250V 160 0.35000 210 0.40000 x 0630 0.630 250V 130 0.80900 190 0.50000 x 0800 0.800 250V 85 1.10000 170 0.60000 x 1100 1.000 250V 70 2.00000 160 0.70000 x 1125 1.250 250V 50 5.12000 160 0.80000 x Note: 1.00 means the number one with two decimal places. 1,000 means the number one thousand. © 2018 Littelfuse, Inc. Specifications are subject to change without notice. Application testing is strongly recommended. Revised: 02/14/18 Cartridge and Axial Lead Fuses 5×20mm > Medium Acting > 201P Series Temperature Re-rating Curve Average Time Current Curves 00 0,0 10 I-t Characteristics ,00 10 (Min-Max Limit) DIN 41571, T.2 (50mA ... 1.25A) 0 0 1,0 0 10 10 Time (sec.) 0 1 0.1 1 0.0 01 0.0 1 1.5 2 3 4 I Fault / I Rated 5 6 7 8 9 10 15 Soldering Parameters - Wave Soldering Recommended Process Parameters: 280 260 Wave Parameter 240 220 Preheat: 200 (Depends on Flux Activation Temperature) 180 160 140 120 80 60 40 Lead-Free Recommendation (Typical Industry Recommendation) Temperature Minimum: 100°C Temperature Maximum: Preheat Time: 150°C 60-180 seconds 100 Solder Pot Temperature: 260°C Maximum Solder Dwell Time: 2-5 seconds Time (Seconds) Cooling Time Preheat Time Dwell Time 230 240 220 210 200 190 180 170 160 150 140 130 120 110 90 100 80 70 60 50 40 20 0 0 30 20 10 Temperature (°C) - Measured on bottom side of board 300 Recommended Hand-Solder Parameters: Solder Iron Temperature: 350°C +/- 5°C Heating Time: 5 seconds max. Note: These devices are not recommended for IR or Convection Reflow process. © 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 02/14/18 Cartridge and Axial Lead Fuses 5×20mm > Medium Acting > 201P Series Product Characteristics Operating Temperature -25ºC to +70ºC Materials Body: Glass End Caps: Nickel–plated brass Optional Holders: Nickel-plated caps Tin-plated wires Climatic Category -25ºC/+70ºC/21 days (IEC 60068-1-3) Product Marking Cap1: Brand mark, current and voltage ratings Cap2: Series and agency approval marks Stock Conditions -10ºC to +60ºC RH, ≤ 75% yearly average, without dew, maximum value for 30 days-95% Solderability MIL-STD-202, Method 208 Vibration Resistance 24 cycles at 15 min. each (IEC 60068-2-6) 10 - 60 Hz at 0.75 mm amplitude 60 - 2000 Hz at 10 g acceleration Soldering Heat Resistance 260ºC, 10 sec. (IEC 60068-2-20) Dimensions Part Numbering System max. 5.5 201 xxxx 0 xx 1 P Ø 5.2 +0.1/-0.2 20 +0.5/-0.5 0.65 +0.04/-0.01 Series Lead-free Current Rating Code Filler Refer to Amp Code column of Electrical Characteristics Table Ø 5.9 21 +0.5/-0.5 Filler Packaging Code Refer to below Packaging 103.5 max. Packaging Packaging Code Fuse Type Packing Option Quantity 00 Cartridge Type Fuse Bulk 1000 02 Cartridge Type Fuse Bulk 100 30 Cartridge Type Fuse Bulk with Four Color Code 1000 43 Axial Lead Fuse Tape and Reel 1250 53 Axial Lead Fuse Tape and Reel with Four Color Code 1250 Recommended Accessories Accessory Type Holder Block Clip Max Application Voltage Max Application Amperage Series Description 345_ISF Panel Mount Shock-Safe Fuseholder 10 345 Shock-Safe Fuseholder with PC Mount, Solder Mount and Panel Mount options 20 830 PC Mount Shock-Safe Miniature Fuseholder 16 520 Metric OMNI-BLOK® Fuse Block 646 PC Mount Miniature Fuse Block 658 Surface Mount Miniature Fuse Block 10 520_W PC Mount Miniature Fuse Clip 6.3 111 PC Board Mount Fuse Clip 10 445 PC Board Mount Fuse Clip 10 10 250 6.3 Notes: 1. Do not use in applications above rating. 2. Please refer to fuseholder data sheet for specific re-rating information. 3. Please contact factory for applications greater than the max voltage and amperage shown. Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at: www.littelfuse.com/disclaimer-electronics. © 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 02/14/18