30KPA258A

Transient Voltage Suppression Diodes Axial Leaded – 30000W > 30KPA series RoHS 30KPA Series Description The 30KPA Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features t
-PX
JODSFNFOUBM
TVSHF
resistance t
5ZQJDBM
*R less than 2μA above 73V ΔVBR = 0.1% x VBR@25°C x ΔT t
)JHI
UFNQFSBUVSF
soldering guaranteed: t
(MBTT
QBTTJWBUFE
DIJQ
260°C/40 seconds / junction in P600 package 0.375”,(9.5mm) lead t
8
QFBL
QVMTF
length, 5 lbs., (2.3kg) capability at 10×1000μs tension waveform, repetition rate t
1MBTUJD
QBDLBHF
IBT
(duty cycles):0.01% Underwriters Laboratory t
'BTU
SFTQPOTF
UJNF
Flammability classification typically less than 1.0ps 94V-O from 0 Volts to BV min t
.BUUF
5JO
-FBEoGSFF
QMBUFE t
&YDFMMFOU
DMBNQJOH
capability Agency Approvals AGENCY AGENCY FILE NUMBER E230531 Maximum Ratings and Thermal Characteristics (TA=25OC unless otherwise noted) Parameter Symbol Value Unit PPPM 30000 W Applications Steady State Power Dissipation on inifinite heat sink at TL=75ºC (Fig. 5) PD 8.0 W Peak Forward Surge Current, 8.3ms Single Half Sine Wave Unidirectional only (Note 2) TVS devices are ideal for the protection of I/O interfaces, VCC bus and other vulnerable circuits used in telecom, computer, industrial and consumer electronic applications. IFSM 400 A TJ , TSTG -55 to 175 °C Typical Thermal Resistance Junction to Lead RuJL 8.0 °C/W Typical Thermal Resistance Junction to Ambient RuJA 40 °C/W Peak Pulse Power Dissipation by 10x1000μs test waveform (Fig.1) (Note 1) Operating Junction and Storage Temperature Range Notes: 1. Non-repetitive current pulse , per Fig. 3 and derated above TA = 25OC per Fig. 2. 2. Measured on 8.3ms single half sine wave or equivalent square wave, duty cycle=4 per minute maximum. ©2009 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to http://www.Littelfuse.com/series/30KPA.html for current information. 123 Revision: January 09, 2009 30KPA Series 30KPA Series t
)BMPHFO'SFF t
3P)4
DPNQMJBOU t
5ZQJDBM
NBYJNVN
temperature coefficient Transient Voltage Suppression Diodes Axial Leaded – 30000W > 30KPA series Electrical Characteristics MIN Test Current IT (mA) Maximum Peak Pulse Current Ipp (A) Maximum Reverse Leakage IR @VR (μ A) Maximum Clamping Voltage VC @ IPP (V) 31.28 33.51 36.90 40.20 43.60 46.90 48.00 50.30 53.60 57.00 60.30 64.80 67.00 71.50 73.70 78.20 79.30 80.40 83.80 87.10 93.80 100.50 107.20 113.90 120.60 134.00 147.40 160.80 167.60 174.30 178.70 187.70 189.90 201.10 221.20 50 50 50 50 20 10 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 606.0 548.9 517.9 490.3 450.9 420.8 415.1 391.5 371.3 350.7 331.5 327.9 297.1 291.3 283.2 278.0 271.7 265.8 253.8 234.9 217.7 207.0 194.2 183.0 172.9 155.9 142.3 135.8 129.8 123.7 120.0 111.2 110.2 104.3 94.7 5000 5000 5000 5000 2000 1000 1000 250 150 50 20 20 15 10 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 50.0 55.2 58.5 61.8 67.2 72.0 73.0 77.4 81.6 86.4 91.4 92.4 102.0 104.0 107.0 109.0 111.5 114.0 119.4 129.0 139.2 146.4 156.0 165.6 175.2 194.4 213.0 223.2 233.4 245.0 252.6 272.4 275.0 290.4 319.8 241.30 268.10 288.20 290.40 301.60 312.80 321.70 5 5 5 5 5 5 5 86.9 78.3 72.8 72.8 69.5 65.3 64.5 2 2 2 2 2 2 2 348.6 387.0 416.4 416.0 436.2 464.0 469.9 Part Number (Uni) Part Number (Bi) Reverse Stand off Voltage VR (Volts) Breakdown Voltage VBR (Volts) @ IT 30KPA28A 30KPA30A 30KPA33A 30KPA36A 30KPA39A 30KPA42A 30KPA43A 30KPA45A 30KPA48A 30KPA51A 30KPA54A 30KPA58A 30KPA60A 30KPA64A 30KPA66A 30KPA70A 30KPA71A 30KPA72A 30KPA75A 30KPA78A 30KPA84A 30KPA90A 30KPA96A 30KPA102A 30KPA108A 30KPA120A 30KPA132A 30KPA144A 30KPA150A 30KPA156A 30KPA160A 30KPA168A 30KPA170A 30KPA180A 30KPA198A 30KPA216A 30KPA240A 30KPA258A 30KPA260A 30KPA270A 30KPA280A 30KPA288A 30KPA28CA 30KPA30CA 30KPA33CA 30KPA36CA 30KPA39CA 30KPA42CA 30KPA43CA 30KPA45CA 30KPA48CA 30KPA51CA 30KPA54CA 30KPA58CA 30KPA60CA 30KPA64CA 30KPA66CA 30KPA70CA 30KPA71CA 30KPA72CA 30KPA75CA 30KPA78CA 30KPA84CA 30KPA90CA 30KPA96CA 30KPA102CA 30KPA108CA 30KPA120CA 30KPA132CA 30KPA144CA 30KPA150CA 30KPA156CA 30KPA160CA 30KPA168CA 30KPA170CA 30KPA180CA 30KPA198CA 28 30 33 36 39 42 43 45 48 51 54 58 60 64 66 70 71 72 75 78 84 90 96 102 108 120 132 144 150 156 160 168 170 180 198 30KPA216CA 30KPA240CA 30KPA258CA 30KPA260CA 30KPA270CA 30KPA280CA 30KPA288CA 216 240 258 260 270 280 288 Agency Approval X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X For bidirectional type having VRWM of 60 volts and less, the IR limit is double. For parts without A , the VBR is ± 10%. 30KPA Series 124 Revision: January 09, 2009 ©2009 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to http://www.Littelfuse.com/series/30KPA.html for current information. Transient Voltage Suppression Diodes Axial Leaded – 30000W > 30KPA series Ratings and Characteristic Curves (T =25°C unless otherwise noted) A Figure 1 - Peak Pulse Power Rating Curve Figure 2 - Pulse Derating Curve 100 Peak Pulse Power (PPP) or Current (IPP) Derating in Percentage % Pppm-Peak Pulse Power (KW) 1000 100 10 1 0.1 0.000001 0.00001 0.0001 0.001 80 60 40 20 0 0 25 50 75 100 125 150 175 200 TA-Ambient temperature (ºC) td-Pulse Width (Sec.) Figure 3 - Pulse Waveform Figure 4 - Typical Junction Capacitance TJ=25°C Pulse Width(td) is defined as the point where the peak current decays to 50% of IPPM Peak Value IPPM 100 Bi-directional V= OV Half Value IPPM IPPM ( ) 2 50 10/1000μsec. Waveform as defined by R.E.A td 0 Uni-directional V= OV Uni-directional @ VR 100 Bi-directional @ VR Tj=25C f=1.0MHz Vsig=50mVp-p 1 1.0 0 10000 2.0 3.0 0 4.0 t-Time (ms) 50 100 150 200 250 VBR - Reverse Breakdown Voltage (V) 300 Figure 6 - Maximum Non-Repetitive Peak Forward Surge Current Figure 5 - Steady State Power Derating Curve 450 8 IFSM, Peak Forward Surge Current (A) Steady State Power Dissipation (W) 9 7 6 5 4 3 L = 0.375” (9.5mm) Lead Lengths 2 1 0 0 25 50 75 300 250 200 150 100 50 1 TL- Lead Temperature (ºC) Specifications are subject to change without notice. Please refer to http://www.Littelfuse.com/series/30KPA.html for current information. 350 0 100 125 150 175 200 ©2009 Littelfuse, Inc. 400 10 100 Number of Cycles at 60 Hz 125 Revision: January 09, 2009 30KPA Series 30KPA Series tr=10μsec Cj, Junction Capacitance (pf) IPPM- Peak Pulse Current, % IRSM 150 Transient Voltage Suppression Diodes Axial Leaded – 30000W > 30KPA series Soldering Parameters Reflow Condition Ramp-up - Temperature Min (Ts(min)) 150°C - Temperature Max (Ts(max)) 200°C - Time (min to max) (ts) 
o

TFDT Critical Zone TL to TP TL Average ramp up rate (Liquidus Temp (TL) to peak 3°C/second max TS(max) to TL - Ramp-up Rate 3°C/second max Reflow tp TP Temperature (T) Pre Heat -FBEoGSFF
BTTFNCMZ tL Ts(max) Ramp-down Ts(min) ts Preheat 25˚C - Temperature (TL) (Liquidus) 217°C - Time (min to max) (ts) 
o

TFDPOET t 25˚C to Peak Time (t) Peak Temperature (TP) 260+0/-5 °C Time within 5°C of actual peak Temperature (tp) 
o

TFDPOET Flow/Wave Soldering (Solder Dipping) Ramp-down Rate 6°C/second max Peak Temperature : 265OC Time 25°C to peak Temperature (TP) 8 minutes Max. Dipping Time : 10 seconds Do not exceed 280°C Soldering : 1 time Physical Specifications Environmental Specifications Weight 0.07oz., 2.5g Temperature Cycle JESD22-A104 Case P600 molded plastic body over passivated junction. Pressure Cooker JESD 22-A102 Polarity Color band denotes the cathode except Bipolar. High Temp. Storage JESD22-A103 Terminal Matte Tin axial leads, solderable per JESD22-B102D. HTRB JESD22-A108 Thermal Shock JESD22-A106 Dimensions D Dimensions C A A B Inches Millimeters Min Max Min Max A 1.000 - 25.40 - B 0.340 0.360 8.60 9.10 C 0.048 0.052 1.22 1.32 D 0.340 0.360 8.60 9.10 P600 30KPA Series 126 Revision: January 09, 2009 ©2009 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to http://www.Littelfuse.com/series/30KPA.html for current information. Transient Voltage Suppression Diodes Axial Leaded – 30000W > 30KPA series Part Numbering System Part Marking System 30KPA xxx XX X Cathode Band 30KPAXXX OPTION CODE: BLANK Reel Tape -B Bulk Packaging TYPE CODE: A Uni-Directional (5% Voltage Tolerance) CA Bi-Directional F VOLTAGE CODE (Refer to the Electrical Characteristics table) Littelfuse Logo Product Type SERIES CODE Packaging Component Package Quantity Packaging Option 30KPAxxxXX P600 800 Tape & Reel 30KPAxxxXX-B P600 500 BULK Packaging Specification EIA STD RS-296E Littelfuse Concord Packing Spec. DM-0016 30KPA Series Part Number ©2009 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to http://www.Littelfuse.com/series/30KPA.html for current information. 127 Revision: January 09, 2009 30KPA Series