38212500430

Fuse Datasheet 382 Series TR5 ® Fuse, Time-Lag RoHS Pb PS E Description The 382 Series are TE5 Time-Lag type Fuses, 250V rated, with enhanced breaking capacity and designed in accordance to IEC 60127-3. Features & Benefits ■ Halogen free, Lead-free and RoHS compliant ■ Reduced PCB space requirements ■ Direct solderable or plug-in versions ■ 100A breaking capacity ■ nternationally approved ■ Low internal resistance Additional Information ■ Shock safe casing ■ Vibration resistant ■ UL Recognized to UL/CSA/ NMX 248-1 and UL/CSA/NMX 248-14 ■ Conforms to EN/IEC 60127-1 and EN/IEC 60127-3 ■ Conforms to J60127-1 and J60127-3 ■ Conforms to K60127-1 and K60127-3 ■ Conforms to GB/T9364.1 and GB/T9364.3 ■ Available from 1A to 10A Resources Accessories Applications Samples ■ Battery Chargers ■ Power supplies ■ Consumer Electronics ■ Industrial Controllers Agency Approvals Agency PS E Agency File Number 40018249 40018250 E67006 JET1896-31007-2001 JET1896-31007-1006 2020970207000057 SU05024-7003 SU05024-7002 SU05024-7001 SU05024-7004 SU05024-7005 Electrical Characteristics % of Ampere Rating Ampere Range 1A - 4A 5A - 6.3A 1A - 10A 1 - 5A 6.3 - 10A 1A - 6.3A 1-2.5A 3.15A 4A 5A 6.3A 150% 210% 275% 400% 1000% 1 Opening Time 1A - 6.3A 8A - 10A 1 Hour, Min. 2 Minutes, Max. 400 ms, Min. ; 10 Sec., Max. 150 ms, Min. ; 3 Sec., Max. 20 ms, Min. ; 150 ms, Max. 1 Hour, Min. 300 s, Max. 1 s, Min. ; 20 s, Max. 150 ms, Min. ; 3 Sec., Max. 20 ms, Min. ; 150 ms, Max. © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 06/15/21 Fuse Datasheet 382 Series TR5 ® Fuse, Time-Lag Electrical Characteristics Amp Code Rated Current Voltage Rating Nominal Cold Resistance (Ohms)2 Breaking Capacity3 Voltage Drop Melting Power 1.0×IN max. Integral 10×IN Dissipation (mV) 1.5×IN max. (mW) min. (A2s) Agency Approvals PS E 1100 1.00 A 250 V 0.0625 100 400 4.85 X X X X X 1125 1.25 A 250 V 0.0500 95 465 6.88 X X X X X 1160 1.60 A 250 V 0.0377 90 490 12.67 X X X X X 1200 2.00 A 250 V 0.0280 85 670 17.80 X X X X X 1250 2.50 A 250 V 0.0215 80 750 29.69 X X X X X 1315 3.15 A 250 V 0.0176 75 900 45.35 X X X X X 1400 4.00 A 250 V 0.0138 70 1200 72.00 X X X X X 1500 5.00 A 250 V 0.0108 65 1250 121.25 X X X X X 100A @250VAC 1630 6.30 A 250 V 0.0076 65 1400 148.84 X X X X X 1800 8.00 A 250 V 0.0059 63 1600 233.60 - X X - - 2100 10.00 A 250 V 0.0042 57 1600 365.00 - X X - - Notes: 1. 1.00 means the number one with two decimal places. 1,000 means the number one thousand. 2. Resistance is measured at 10% of rated current, 25°C. 3. Breaking Capacity may differ based on Agency Approval. See Agency Approval certificate for more details. Temperature Temperature Rerating Curve Rerating Curve Average Time Current Curves Average Time Current Curves 10A 8A 6.3A 5A 4A 3.15A 2.5A 2A 1.6A 1.25A 1A 140 100000 120 100 10000 100 80 80 60 1000 60 40 23°C 23°C 40 20 20 0 -40°C 0 -40 100 -20°C 0°C -20 0 20°C 40°C 60°C 80°C 20 40 60 80 TIME IN SECONDS PERCENT OF RATING PERCENT OF RATING 140 120 AMBIENT TEMPERATURE AMBIENT TEMPERATURE (°C) Note: 1. Rerating depicted in this curve is in addition to the standard derating of 25% for continuous operation. 10 1 0.1 0.01 0.001 0.1 1 10 100 1000 CURRENT IN AMPERES 2 © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 06/15/21 Fuse Datasheet 382 Series TR5 ® Fuse, Time-Lag Soldering Parameters - Wave Soldering Recommended Process Parameters: 300 Temperature (°C) - Measured on bottom side of board 280 Wave Parameter 260 240 Preheat: 220 200 180 160 140 120 100 80 60 40 240 230 220 210 200 190 180 170 160 150 140 130 120 110 90 100 80 70 60 50 40 30 20 0 10 (Depends on Flux Activation Temperature) (Typical Industry Recommendation) Temperature Minimum: Temperature Maximum: Preheat Time: Solder Pot Temperature: Solder Dwell Time: 100°C 150°C 60-180 seconds 260°C Maximum 2-5 seconds Recommended Hand-Solder Parameters: Solder Iron Temperature: 350°C +/- 5°C Heating Time: 5 seconds max. Note: These devices are not recommended for IR or Convection Reflow process. 20 0 Lead-Free Recommendation Time (Seconds) Cooling Time Preheat Time Dwell Time Product Characteristics Base/Cap: Brown Thermoplastic  Polyamide PA 6.6, UL 94 V-0 Round Pins: Copper, Tin-plated 10 N (IEC 60068-2-21) 260ºC, ≤ 3s. (Wave) 350ºC, ≤ 1s. (Soldering Iron) 260ºC, 10s. (IEC 60068-2-20) 350ºC, 3s. (Soldering Iron) Materials Lead Pull Strength Solderability Soldering Heat Resistance Operating Temperature Climatic Category Stock Conditions Vibration Resistance Dimensions (mm) -40ºC to +85ºC (consider re-rating) -40ºC to +85ºC /21 days (IEC 60068-1,-2-1,-2-2,-2-78) +10ºC to +60ºC RH ≤ 75% yearly average, without dew, maximum value for 30 days–95% 24 cycles at 15 min. each (IEC 60068-2-6) 10 - 60 Hz at 0.75 mm amplitude 60 - 2000 Hz at 10 g acceleration Part Numbering System ∅ 8.5 382 xxxx 0000 max. 8 Series 0.5 min L Amp Code ∅ 0.6 Refer to Amp Code column of Electrical Characteristics Table Long Leads (L=18.8mm) Short Leads (L=4.3mm) Packaging Code Holes in PCB 0000 Tape/Ammopack (1,000 pcs.) 0410 Short Leads - Bulk (1,000 pcs.) 0430 Short Leads - Bulk (200 pcs.) 1 +0.1 5.08 Packaging Holes in the printed circuit board Packaging Option Packaging Specification Tape & Ammopack Short Leads Short Leads N/A N/A N/A Quantity 382 Series 1,000 1,000 200 Quantity & Packaging Code Taping Width 0000 0410 0430 N/A N/A N/A Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at: www.littelfuse.com/disclaimer-electronics. 3 © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 06/15/21