38314000000

Radial Lead Fuses TR5® > Time-Lag Fuse > 383 Series 383 Series, TR5® Time-Lag Fuse RoHS Pb PS E Description The 383 series are TR5® time-lag 300V rated fuses and designed in accordance to IEC 60127-3. Features • Halogen free, Lead-free and RoHS compliant Agency Approvals Agency Agency File Number Ampere Range 40022712 4A - 5A JET1896-31007-2001 JET1896-31007-1006 1A - 5A 6.3A - 10A E67006 1A - 10A N/A 1A - 10A PS E • Reduced PCB space requirements • Recognized to UL/CSA/ NMX 248-1 and UL/CSA/ NMX 248-14 • Direct solderable or plug-in versions • Conforms to EN/J601271 and EN/J60127-3 • Internationally approved • CE Mark indicates compliance with LowVoltage and RoHS Directives • Low internal resistance • Shock safe casing Applications • Electronic Ballast Electrical Characteristics for Series % of Ampere Rating 150% 210% 275% 400% 1000% • Vibration resistant Additional Information Opening Time 1A - 6.3A 8A - 10A 1 Hour, Min. 2 Minutes, Max. 400 ms, Min.; 10 s, Max. 150 ms, Min.; 3 s, Max. 20 ms, Min. ; 150 ms, Max. 1 Hour, Min. 300 s, Max. 1 s, Min.; 20 s, Max. 150 ms, Min.; 3 s, Max. 20 ms, Min. ; 150 ms, Max. Datasheet Samples Resources Electrical Characteristics Specifications by Item Amp Code Rated Current 1100 1125 1160 1200 1250 1315 1400 1500 1630 1800 2100 1.00 A 1.25 A 1.60 A 2.00 A 2.50 A 3.15 A 4.00 A 5.00 A 6.30 A 8.00 A 10.00 A Max Voltage Rating 300 V 300 V 300 V 300 V 300 V 300 V 300 V 300 V 300 V 300 V 300 V Breaking Capacity 100A@300VAC 50A@320VAC 50A@320VAC 100A@250VAC Nominal Cold Resistance (Ohms) Voltage Drop 1.0×IN max. (mV) Power Dissipation 1.5×IN max. (mW) Melting Integral 10×IN max. (A2s) 0.0625 0.0500 0.0377 0.0280 0.0215 0.0176 0.0138 0.0108 0.0076 0.0059 0.0042 100 95 90 85 80 75 70 65 65 63 57 400 465 490 670 750 900 1200 1250 1400 1600 1600 4.85 6.88 12.67 17.80 29.69 45.35 72.00 121.25 148.84 233.60 365.00 Agency Approvals PS E X X - X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 02/20/20 Radial Lead Fuses TR5® > Time-Lag Fuse > 383 Series Temperature Re-rating Curve Average Time Current Curves 10A 8A 6.3A 5A 4A 3.15A 2.5A 2A 1.6A 1.25A 1A 140 100000 140 120 10000 100 80 80 60 1000 60 40 23°C 23°C 40 20 100 20 0 -40°C 0 -40 -20°C 0°C 20°C 40°C 60°C 80°C -20 0 20 40 60 80 Ambient Temperature Time in Seconds Percent of Rating PERCENT OF RATING 120 100 AMBIENT TEMPERATURE (°C) Note: 1. Rerating depicted in this curve is in addition to the standard derating of 25% for continuous operation. 10 1 0.1 0.01 0.001 0.1 1 10 100 1000 Current in Ampers Soldering Parameters - Wave Soldering Recommended Process Parameters: 280 Wave Parameter 260 Lead-Free Recommendation 240 Preheat: 220 (Depends on Flux Activation Temperature) 200 (Typical Industry Recommendation) 180 Temperature Minimum: 100°C 160 Temperature Maximum: 150°C 140 Preheat Time: 60-180 seconds 120 100 80 60 Solder Pot Temperature: 260°C Maximum Solder Dwell Time: 2-5 seconds Recommended Hand-Solder Parameters: 40 Time (Seconds) Cooling Time Preheat Time Dwell Time 240 230 220 210 200 190 180 170 160 150 140 130 120 110 90 100 80 70 60 50 40 30 0 0 20 20 10 Temperature (°C) - Measured on bottom side of board 300 Solder Iron Temperature: 350°C +/- 5°C Heating Time: 5 seconds max. Note: These devices are not recommended for IR or Convection Reflow process. © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 02/20/20 Radial Lead Fuses TR5® > Time-Lag Fuse > 383 Series Product Characteristics Base/Cap: Brown Thermoplastic  Polyamide PA 6.6, UL 94 V-0 Round Pins: Copper, Tin-plated 10 N (IEC 60068-2-21) 260ºC, ≤ 3s. (Wave) 350ºC, ≤ 1s. (Soldering Iron) 260ºC, 10s. (IEC 60068-2-20) 350ºC, 3s. (Soldering Iron) Materials Lead Pull Strength Solderability Soldering Heat Resistance -40ºC to +85ºC (consider re-rating) -40ºC to +85ºC /21 days (IEC 60068-1,-2-1,-2-2,-2-78) +10ºC to +60ºC RH ≤ 75% yearly average, without dew, maximum value for 30 days–95% 24 cycles at 15 min. each (IEC 60068-2-6) 10 - 60 Hz at 0.75 mm amplitude 60 - 2000 Hz at 10 g acceleration Operating Temperature Climatic Category Stock Conditions Vibration Resistance Dimensions Part Numbering System 8.5 383 xxxx 0000 max. 8 Series Amp Code Refer to Amp Code column of Electrical Characteristics Table 5.08 0.5 min Packaging Code 0000 Tape/Ammopack (1,000pcs.) 0410 Short Leads - Bulk (1,000pcs.) 1 + 0.1 L 0.6 Holes in PCB Long Leads (L=18.8mm) Short Leads (L=4.3mm) Packing Packaging Option Packaging Specification Quantity Quantity & Packaging Code Taping Width 383 Series Tape & Ammopack N/A 1,000 0000 N/A Short Leads N/A 1,000 0410 N/A Disclaimer Notice - Littelfuse products are not designed for, and shall not be used for, any purpose (including, without limitation, automotive, military, aerospace, medical, life-saving, life-sustaining or nuclear facility applications, devices intended for surgical implant into the body, or any other application in which the failure or lack of desired operation of the product may result in personal injury, death, or property damage) other than those expressly set forth in applicable Littelfuse product documentation. Warranties granted by Littelfuse shall be deemed void for products used for any purpose not expressly set forth in applicable Littelfuse documentation. Littelfuse shall not be liable for any claims or damages arising out of products used in applications not expressly intended by Littelfuse as set forth in applicable Littelfuse documentation. The sale and use of Littelfuse products is subject to Littelfuse Terms and Conditions of Sale, unless otherwise agreed by Littelfuse. Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at www.littelfuse.com/disclaimer-electronics. © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 02/20/20