Radial Lead Fuses
TE5® Fuse > Time-Lag Fuse > 400 Series
400 Series, TE5® Fuse, Time-Lag
RoHS Pb
PS
E
Description
The 400 Series TE5® Fuse is a Time-Lag type subminiature
fuse that is designed for overcurrent protection. It is rated
250V and meets the requirements of IEC 60127-3.
Features
• Halogen free, Lead-free
and RoHS compliant
• High Breaking Capacity
up to 130A at 250VAC
• Reduced PCB space
requirements
• Internationally approved
• Direct solderable or plugin versions
Agency Approvals
• Low internal resistance
Agency
Agency File Number
Ampere Range
E67006
0.50A – 6.3A
PS
E
JET1896-31007-2001
JET1896-31007-1006
1A – 5A
6.3A
40026355
0.50A – 6.3A
N/A
0.5A - 6.3A
2020970207000059
0.50A – 6.3A
SU05024-9004
SU05024-9003
SU05024-9001
SU05024-10003
SU05024-9002
0.50A – 0.80A
1A – 2.5A
3.15A
4A – 5A
6.3A
• Conforms to IEC/EN/J/K
60127-1 and EC/EN/J/K
60127-3
• Shock safe casing
• Vibration resistant
Applications
• Battery chargers
• Power supplies
• Consumer electronics
• Industrial controllers
Electrical Characteristics
Additional Information
% of Ampere Rating
Datasheet
• Recognized to UL/CSA/
NMX 248-1 and UL/CSA/
NMX 248-14
Resources
Samples
Opening Time
150%
1 Hour, Minimum
210%
120 Secs., Maximum
275%
400 ms, Minimum; 10 Secs., Maximum
400%
150 ms, Minimum; 3 Secs., Maximum
1000%
20 ms, Minimum; 150 ms, Maximum
Electrical Characteristics
Amp
Code
Rated
Current
Rated
Voltage
(V)
Breaking
Capacity
Nominal Cold
Resistance
(Ohms)
Voltage
Drop
1.0×IN
max. (mV)
Power
Dissipation
1.0×IN
max. (mW)
Agency Approvals
Melting
Integral
10×IN
max. (A2s)
PS
E
0.5
0.5A
250
0.1950
165
297
2.170
x
-
x
x
x
x
0800
0.8A
250
0.1003
116
387
6.720
x
-
x
x
x
x
1100
1.00A
250
0.0808
89
432
10.70
x
x
x
x
x
x
1125
1.25A
250
0.0562
76
411
14.44
x
x
x
x
x
x
1160
1.60A
250
0.0384
76
601
21.75
x
x
x
x
x
x
1200
2.00A
250
0.0292
75
758
46.00
x
x
x
x
x
x
1250
2.50A
250
0.0216
61
683
61.94
x
x
x
x
x
x
1315
3.15A
250
0.0167
55
921
101.61
x
x
x
x
x
x
1400
4.00A
250
0.0124
65
936
133.40
x
x
x
x
x
x
1500
5.00A
250
0.0098
56
948
216.50
x
x
x
x
x
x
1630
6.30A
250
0.0072
48
926
323.08
x
x
x
x
x
x
130A
@250VAC
* Per VDE, approved breaking capacity is at 100A, 250VAC
© 2020 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: BA.08/18/20
Radial Lead Fuses
TE5® Fuse > Time-Lag Fuse > 400 Series
Average Time Current Curves
0.5A
0.8A
1A
1.25A
1.6A
2A
2.5A
3.15A
4A
5A
6.3A
Temperature Re-rating Curve
DE-RATING CURVE
140
100
100
80
60
10
23°C
40
TIME IN SECONDS
PERCENT OF RATING
120
20
0
-40
-20
0
20
40
60
80
1
AMBIENT TEMPERATURE (°C)
0.1
Note
1. Rerating depicted in this curve is in addition to the standard derating of 25% for continuous operation.
0.01
0.001
0
1
10
100
1000
CURRENT IN AMPERES
Recommended Process Parameters:
300
280
260
Wave Parameter
240
220
Preheat:
200
(Depends on Flux Activation Temperature)
180
160
140
120
100
80
60
40
20
Time (Seconds)
Preheat Time
Cooling Time
240
230
220
210
200
190
180
170
160
150
140
130
110
120
90
100
80
70
60
50
40
30
20
10
0
0
Temperature ( ) - Measured on bottom side of board
Soldering Parameters - Wave Soldering
Lead-Free Recommendation
(Typical Industry Recommendation)
Temperature Minimum:
100°C
Temperature Maximum:
150°C
Preheat Time:
60-180 seconds
Solder Pot Temperature:
260°C Maximum
Solder Dwell Time:
2-5 seconds
Recommended Hand-Solder Parameters:
Solder Iron Temperature: 350°C +/- 5°C
Heating Time: 5 seconds max.
Note: These devices are not recommended for IR or Convection Reflow process.
Dwell Time
© 2020 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: BA.08/18/20
Radial Lead Fuses
TE5® Fuse > Time-Lag Fuse > 400 Series
Product Characteristics
Base/Cap: Brown Thermoplastic
Polyamide, UL 94 V-0
Round Pins: Copper, Tin-plated
10 N (IEC 60068-2-21)
260ºC, ≤ 3s. (Wave)
350ºC, ≤ 1s. (Soldering Iron)
260ºC, 10s. (IEC 60068-2-20)
350ºC, 3s. (Soldering Iron)
Materials
Lead Pull Strength
Solderability
Soldering Heat
Resistance
Operating Temperature –40ºC to +85ºC (Consider re-rating)
–40ºC to +85ºC/21 days
Climatic Category
(IEC 60068-1, -2-1, -2-2, -2-78)
+10ºC to +60ºC relative humidity 75% yearly
Stock Conditions
average, without dew, maximum value for 30
days – 95%
24 cycles at 15 min. each (IEC 60028-2-6)
10–60Hz at 0.75mm amplitude
20–2000Hz at 10g acceleration
Vibration Resistance
Dimensions
Part Numbering System
400 xxxx 0000
max. 4
8.5
max. 8
Series
1.5
Amp Code
4.0±0.5
7.5±0.3
Refer to Amp Code column of
Electrical Characteristics Table
1 +0.1
L
Ø 0.6
0.5 min
4.0±1.0
Packaging Code
Holes in PCB
7.5mm Pitch
1 +0.1
5.08
0000
0440
0075
Tape/Ammopack
Shortleads - Bulk
7.5mm pitch - Bulk
(1,400 pcs)
(1,400 pcs)
(1,400 pcs)
Holes in PCB
Long Leads (L=18.8±0.3mm)
Short Leads (L=4.3±0.3mm)
Packaging
Packaging Option
Packaging Specification
Quantity
Quantity &
Packaging Code
Taping Width
400 Series
Tape & Ammopack
N/A
1,400
0000
N/A
Short Leads
N/A
1,400
0440
N/A
7.5 mm Pitch
N/A
1,400
0075
N/A
Disclaimer Notice - Littelfuse products are not designed for, and shall not be used for, any purpose (including, without limitation, automotive, military, aerospace, medical, life-saving, life-sustaining or nuclear facility applications,
devices intended for surgical implant into the body, or any other application in which the failure or lack of desired operation of the product may result in personal injury, death, or property damage) other than those expressly set forth
in applicable Littelfuse product documentation. Warranties granted by Littelfuse shall be deemed void for products used for any purpose not expressly set forth in applicable Littelfuse documentation. Littelfuse shall not be liable
for any claims or damages arising out of products used in applications not expressly intended by Littelfuse as set forth in applicable Littelfuse documentation. The sale and use of Littelfuse products is subject to Littelfuse Terms and
Conditions of Sale, unless otherwise agreed by Littelfuse. Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own
applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at www.littelfuse.com/disclaimer-electronics.
© 2020 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: BA.08/18/20
