5.0SMDJ11CAS

TVS Diodes Datasheet 5.0SMDJxxS Series Single Chip Design RoHS Pb e3 Description The 5.0SMDJxxS series, single chip design is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features ■ Excellent clamping capability ■ 5000W peak pulse power capability at 10/1000μs ■ Low incremental surge waveform, repetition rate (duty resistance cycles):0.01% ■ Typical IR less than 2μA when ■ Recognized to UL 497B as an VBR min>12V Isolated Loop Circuit Protector ■ High temperature to reflow ■ DO214AB SMT package for soldering guaranteed: minimized board space 260°C/10sec ■ Low profile package ■ VBR @ TJ= VBR@25°C x (1+αT ■ Typical failure mode is short from over-specified voltage or current Additional Information ■ Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c Resources Accessories ■ UL Recognized compound meeting flammability rating V-0 ■ Meet MSL level1, per J-STD-020, LF maximun peak of 260°C ■ ESD protection of data lines in accordance with IEC 61000■ Matte tin lead–free plated 4-2, ESD 30kV (Air), 30kV ■ Halogen free and RoHS (Contact) compliant ■ EFT protection of data lines in ■ Pb-free E3 means 2nd level accordance with IEC 61000interconnect is Pb-free and 4-4 the terminal finish material is ■ Built-in strain relief tin(Sn) (IPC/JEDEC J-STD609A.01) ■ Glass passivated chip junction Samples Agency Approvals Agency x (TJ - 25))(αT:Temperature Coefficient) Agency File Number E230531 ■ Very fast response time Maximum Ratings and Thermal Characteristics (TA=25OC unless otherwise noted) Parameter Symbol Value Unit Maximum Peak Pulse Power Dissipation at TL=25OC by 10/1000µs Waveform (Fig.2)(Note 1)(Note 2) PPPM 5000 W Power Dissipation on Infinite Heat Sink at TL=50OC (Note 4) PD 6.5 W Peak Forward Surge Current, 8.3ms Single Half Sine Wave (Note 3) IFSM 300 A Maximum Instantaneous Forward Voltage at 100A for Unidirectional Only VF 3.5 V Operating Temperature Range TJ -65 to 150 °C Storage Temperature Range TSTG -65 to 175 °C Typical Thermal Resistance Junction to Lead RθJL 15 °C/W Typical Thermal Resistance Junction to Ambient RθJA 75 °C/W Applications TVS components are ideal for the protection of I/O Interfaces, VCC bus and other vulnerable circuits used in Telecom, Computer, Industrial and Consumer electronic applications. Functional Diagram Bi-directional Cathode Anode Uni-directional Notes: 1. Non-repetitive current pulse , per Fig. 4 and derated above TJ (initial) =25OC per Fig. 3. 2. Voltage of 6.0V~60V products’s peak pulse power dissipation is 5000W, and 64V and 70V is 4500W. Bidirectional products 33V~58V are also 4500W. 3. Measured on 8.3ms single half sine wave or equivalent square wave for unidirectional components only,duty cycle=4 per minute maximum. 4. Mounted on copper pad area of 0.31x0.31” (8.0 x 8.0mm) to each terminal. 1 © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: JC.06/02/21 TVS Diodes Datasheet 5.0SMDJxxS Series Single Chip Design Electrical Characteristics (TA=25°C unless otherwise noted) Part Number (Uni) Part Number (Bi) Marking UNI 5.0SMDJ6.0AS 5.0SMDJ6.5AS 5.0SMDJ7.0AS 5.0SMDJ7.5AS 5.0SMDJ8.0AS 5.0SMDJ8.5AS 5.0SMDJ9.0AS 5.0SMDJ10AS 5.0SMDJ11AS 5.0SMDJ12AS 5.0SMDJ13AS 5.0SMDJ14AS 5.0SMDJ15AS 5.0SMDJ16AS 5.0SMDJ17AS 5.0SMDJ18AS 5.0SMDJ20AS 5.0SMDJ22AS 5.0SMDJ24AS 5.0SMDJ26AS 5.0SMDJ28AS 5.0SMDJ30AS 5.0SMDJ33AS 5.0SMDJ36AS 5.0SMDJ40AS 5.0SMDJ43AS 5.0SMDJ45AS 5.0SMDJ48AS 5.0SMDJ51AS 5.0SMDJ54AS 5.0SMDJ58AS 5.0SMDJ60AS 5.0SMDJ64AS 5.0SMDJ70AS 5.0SMDJ6.0CAS 5.0SMDJ6.5CAS 5.0SMDJ7.0CAS 5.0SMDJ7.5CAS 5.0SMDJ8.0CAS 5.0SMDJ8.5CAS 5.0SMDJ9.0CAS 5.0SMDJ10CAS 5.0SMDJ11CAS 5.0SMDJ12CAS 5.0SMDJ13CAS 5.0SMDJ14CAS 5.0SMDJ15CAS 5.0SMDJ16CAS 5.0SMDJ17CAS 5.0SMDJ18CAS 5.0SMDJ20CAS 5.0SMDJ22CAS 5.0SMDJ24CAS 5.0SMDJ26CAS 5.0SMDJ28CAS 5.0SMDJ30CAS 5.0SMDJ33CAS 5.0SMDJ36CAS 5.0SMDJ40CAS 5.0SMDJ43CAS 5.0SMDJ45CAS 5.0SMDJ48CAS 5.0SMDJ51CAS 5.0SMDJ54CAS 5.0SMDJ58CAS - BI 5PAB 5BAB 5PAE 5BAE 5PAF 5BAF 5PAG 5BAG 5PAK 5BAK 5PAM 5BAM 5PAP 5BAP 5PAR 5BAR 5PAT 5BAT 5PAV 5BAV 5PAX 5BAX 5PAZ 5BAZ 5PBE 5BBE 5PBG 5BBG 5PBK 5BBK 5PBM 5BBM 5PBP 5BBP 5PBR 5BBR 5PBT 5BBT 5PBV 5BBV 5PBX 5BBX 5PBZ 5BBZ 5PCB 5BCB 5PCE 5BCE 5PCF 5BCF 5PCG - 5BCG 5PCK 5BCK 5PCM - 5BCM 5PCP 5BCP 5PCR 5BCR 5PCT 5BCT 5PCV 5PCX 5PCZ - Reverse Stand off Voltage VR (Volts) 6.0 6.5 7.0 7.5 8.0 8.5 9.0 10.0 11.0 12.0 13.0 14.0 15.0 16.0 17.0 18.0 20.0 22.0 24.0 26.0 28.0 30.0 33.0 33.0 36.0 36.0 40.0 40.0 43.0 43.0 45.0 45.0 48.0 48.0 51.0 51.0 54.0 54.0 58.0 58.0 60.0 64.0 70.0 Breakdown Voltage VBR (Volts) @ IT Test Current IT (mA) Min Max 6.67 7.22 7.78 8.33 8.89 9.44 10.0 11.1 12.2 13.3 14.4 15.6 16.7 17.8 18.9 20.0 22.2 24.4 26.7 28.9 31.1 33.3 36.7 36.7 40.0 40.0 44.4 44.4 47.8 47.8 50.0 50.0 53.3 53.3 56.7 56.7 60.0 60.0 64.4 64.4 66.7 71.1 77.8 7.37 7.98 8.60 9.21 9.83 10.4 11.1 12.3 13.5 14.7 15.9 17.2 18.5 19.7 20.9 22.1 24.5 26.9 29.5 31.9 34.4 36.8 40.6 40.6 44.2 44.2 49.1 49.1 52.8 52.8 55.3 55.3 58.9 58.9 62.7 62.7 66.3 66.3 71.2 71.2 73.7 78.6 86.0 10 10 10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Maximum Maximum Clamping Peak Pulse Voltage VC Current IPP @IPP (10/1000μs) (10/1000μs) (A) (V) 10.3 11.2 12.0 12.9 13.6 14.4 15.4 17.0 18.2 19.9 21.5 23.2 24.4 26.0 27.6 29.2 32.4 35.5 38.9 42.1 45.4 48.4 53.3 53.3 58.1 58.1 64.5 64.5 69.4 69.4 72.7 72.7 77.4 77.4 82.4 82.4 87.1 87.1 93.6 93.6 96.8 103.0 113.0 485.4 446.4 416.7 387.6 367.6 347.2 324.7 294.1 274.7 251.3 232.6 215.5 204.9 192.3 181.2 171.2 154.3 140.8 128.5 118.8 110.1 103.3 93.9 84.4 86.1 77.5 77.6 69.8 72.1 64.8 68.8 61.9 64.7 58.1 60.7 54.6 57.5 51.7 53.5 48.1 51.7 43.7 39.9 MaxiMaximum mum ClampPeak ing Pulse Voltage Current VC IPP @ IPP (8/20μs) (8/20μs) (A) (V) 13.3 14.5 15.5 16.7 17.6 18.6 19.9 22.0 23.5 25.7 27.8 30.0 31.5 33.6 35.7 37.7 41.9 45.9 50.3 54.4 58.7 62.5 68.9 68.9 75.1 75.1 83.3 83.3 89.7 89.7 93.9 93.9 100.0 100.0 106.5 106.5 112.5 112.5 120.9 120.9 125.1 133.1 146.0 2669.7 2455.2 2291.9 2131.8 2021.8 1909.6 1785.9 1617.6 1510.9 1382.2 1279.3 1185.3 1127.0 1057.7 996.6 941.6 848.7 774.4 706.8 653.4 605.6 568.2 516.5 516.5 430.5 430.5 388.0 388.0 360.5 360.5 344.0 344.0 323.5 323.5 303.5 303.5 287.5 287.5 267.5 267.5 258.5 243.0 221.5 Maximum Reverse Leakage IR@ VR (μA) Maximum Temperature coefficient of VBR (%/C) 800.0 500.0 200.0 100.0 50.0 20.0 10.0 5.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 0.046 0.052 0.058 0.061 0.064 0.066 0.069 0.071 0.074 0.075 0.076 0.080 0.083 0.084 0.085 0.088 0.091 0.092 0.092 0.093 0.094 0.096 0.097 0.097 0.098 0.098 0.099 0.099 0.100 0.100 0.101 0.101 0.101 0.101 0.101 0.101 0.102 0.102 0.103 0.103 0.103 0.104 0.105 Agency Approval X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X For bidirectional type having VR of 10 volts and less, the IR limit is double. 2 © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: JC.06/02/21 TVS Diodes Datasheet 5.0SMDJxxS Series Single Chip Design I-V Curve Characteristics Uni-directional Bi-Directional IPP Vc VBR VR IR VF IT Vc VBR VR V IT IR IR IT IPP PPPM VR VBR VC IR VF V VR VBR VC IPP Peak Pulse Power Dissipation -- Max power dissipation Stand-off Voltage -- Maximum voltage that can be applied to the TVS without operation Breakdown Voltage -- Maximum voltage that flows though the TVS at a specified test current (IT) Clamping Voltage -- Peak voltage measured across the TVS at a specified Ippm (peak impulse current) Reverse Leakage Current -- Current measured at VR Forward Voltage Drop for Uni-directional Ratings and Characteristic Curves (TA= 25°C unless otherwise noted) Figure 1: TVS Transients Clamping Waveform Figure 2: Peak Pulse Power Rating Voltage Transients PPPM-Peak Pulse Power (KW) 1000 Voltage or Current Voltage Across TVS Current Through TVS TJ initial = Tamb 100 5kW at 10/1000µs, 25°C 10 4.5kW at 10/1000µs, 25°C 1 0.001 0.01 0.1 1 10 td-Pulse Width (ms) Time 3 © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: JC.06/02/21 TVS Diodes Datasheet 5.0SMDJxxS Series Single Chip Design Figure 3: Peak Pulse Power Derating Curve Figure 4: Pulse Waveform 150 IPPM- Peak Pulse Current, % IRSM Peak Pulse Power (PPP) or Current (IPP) Derating in Percentage % 100 80 60 40 20 0 0 25 50 75 100 125 150 TJ - Initial Junction Temperature (ºC) 175 tr=10µsec TJ=25°C Pulse Width(td) is defined as the point where the peak current decays to 50% of IPPM Peak Value IPPM 100 Half Value IPPM IPPM ( ) 2 50 0 10/1000µsec. Waveform as defined by R.E.A td 1.0 0 2.0 3.0 4.0 t-Time (ms) Figure 5: Typical Junction Capacitance Figure 6: Typical Transient Thermal Impedance 100 Uni -direconal 100000 Cj(pF) Transient Thermal Impedance (ºC/W) 1000000 Bi - direconal V=0V 10000 Uni - direconal V=VR 1000 Bi - direconal V=0V 100 10 1 10 VBR - Reverse Breakdown Voltage(V) 10 1 0.1 0.01 0.001 100 0.01 0.1 1 10 100 1000 TP - Pulse Duration (s) Figure 7: Maximum Non-Repetitive Peak Forward Surge Current Uni-Directional Only Figure 8: Peak Forward Voltage Drop vs Peak Forward Current (Typical Values) 450 100.0 350 IF - Peak Forward Current (A) IFSM - Peak Forward Surge Current (A) 400 300 250 200 150 10.0 1.0 100 50 0.1 0 0.0 1 10 100 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 VF - Peak Forward Voltage (V) Number of Cycles at 60Hz 4 © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: JC.06/02/21 TVS Diodes Datasheet 5.0SMDJxxS Series Single Chip Design Soldering Parameters Lead–free assembly Pre Heat - Temperature Min (Ts(min)) 150°C - Temperature Max (Ts(max)) 200°C - Time (min to max) (tL) 60 – 180 secs Average ramp up rate (Liquidus Temp (TL) to peak 3°C/second max TS(max) to TL - Ramp-up Rate 3°C/second max Reflow - Temperature (TL) (Liquidus) 217°C - Time (min to max) (tL) 60 – 150 seconds Peak Temperature (TP) 260+0/-5 °C Time within 5°C of actual peak Temperature (tp) 20 – 40 seconds Ramp-down Rate 6°C/second max Time 25°C to peak Temperature (TP) 8 minutes Max. Do not exceed 260°C Ramp-up TL Polarity Terminal Critical Zone TL to TP Ramp-down Ts(min) ts Preheat 25˚C t 25˚C to Peak Time (t) Environmental Specifications 0.007 ounce, 0.21 grams JEDEC DO214AB. Molded compound body over glass passivated junction Color band denotes positive end (cathode) except for bidirectional versions. Matte Tin-plated leads, Solderable per JESD22-B102 Case tL Ts(max) Physical Specifications Weight tp TP Temperature (T) Reflow Condition High Temp. Storage JESD22-A103 HTRB JESD22-A108 Temperature Cycling JESD22-A104 MSL JEDEC-J-STD-020, Level 1 H3TRB JESD22-A101 RSH JESD22-A111 Dimensions DO-214AB (SMC J-Bend) Dimensions Cathode Band (for Uni-directional products only) C A B J K L H D I E F G Solder Pads (all dimensions in mm) 5 Inches Millimeters Min Max Min Max A 0.114 0.126 2.900 3.200 B 0.260 0.280 6.600 7.110 C 0.220 0.245 5.590 6.220 D 0.079 0.103 2.060 2.620 E 0.030 0.060 0.760 1.520 F - 0.008 - 0.203 G 0.305 0.320 7.750 8.130 H 0.006 0.012 0.152 0.305 I 0.129 - 3.300 - J 0.094 - 2.400 - K - 0.165 - 4.200 L 0.094 - 2.400 - © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: JC.06/02/21 TVS Diodes Datasheet 5.0SMDJxxS Series Single Chip Design Packaging Options Part number Component Package Quantity Packaging Option Packaging Specification 5.0SMDJxxXXS DO-214AB 3000 Tape & Reel - 16mm tape/13” reel EIA STD RS-481 Part Marking System Part Numbering System 5.0SMDJ xx C A S Cathode Band F (for Uni-directional products only) Design Code 5% Vbr Voltage Tolerance XXX YMXXX Bi-directional Vr Voltage Series Littelfuse Logo Marking Code Trace Code Marking Y:Year Code M: Month Code XXX: Lot Code Tape and Reel Specification 0.157 (4.0) Cathode 0.63 (16.0) 0.315 (8.0) 0.059 DIA (1.5) Cover tape 13” 13.0 (330) 0.80 (20.2) Arbor Hole Dia. 0.65 (16.4) Dimensions are in inches (and millimeters). Direction of Feed Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at http://www.littelfuse.com/disclaimer-electronics. 6 © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: JC.06/02/21