5.0SMDJ7.5CASHRAT7

TVS Diode Datasheet 5.0SMDJxxS-HRA Surface Mount – 5000W – DO-214AB RoHS Pb e3 Description Uni-directional Bi-directional The 5.0SMDJxxS-HRA High Reliability series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. These are available with a variety of upscreening options for enhanced reliability. Features ■ High reliability devices with fabrication and assembly lots traceability Agency Approvals Agency Agency File Number E230531 Maximum Ratings and Thermal Characteristics (TA=25°C unless otherwise noted) Parameter Value Unit Peak Pulse Power Dissipation by 10/1000μs Waveform (Fig.1)(Note 1), (Note 2) PPPM 5000 W Power dissipation on infinite heatsink at TA = 50 °C PM(AV) 6.5 W IFSM 300 A Peak Forward Surge Current, 8.3ms Single Half Sine Wave (Note 3) Maximum Instantaneous Forward Voltage at 100A for Unidirectional only Operating Junction and Storage Temperature Range VF 3.5 V TJ, TSTG -65 to 150 °C Typical Thermal Resistance Junction to Lead RθJL 15 °C/W Typical Thermal Resistance Junction to Ambient RθJA 75 °C/W Notes: 1. Non-repetitive current pulse , per Fig. 4 and derated above TJ (initial) =25OC per Fig. 3. 2. Voltage of 6.0V~60V products’s peak pulse power dissipation is 5000W, and 64V and 70V is 4500W. Bidirectional products 33V~58V are also 4500W. 3. Measured on 8.3ms single half sine wave or equivalent square wave for unidirectional components only,duty cycle=4 per minute maximum. 4. Mounted on copper pad area of 0.31x0.31” (8.0 x 8.0mm) to each terminal. ■ Low incremental surge resistance ■ Enhanced reliability screening ■ Typical I less than 2μA above R options are available in 12V reference to MIL-PRF-19500. Refer to screen process table ■ High Temperature soldering guaranteed: 260°C/40 for more detail on screening seconds at terminals options ■ Plastic package has ■ For surface mounted Underwriters laboratory applications in order to flammability 94V-O optimize board space ■ Low profile package ■ Built-in strain relief Symbol ■ Excellent clamping capability ■ VBR @TJ= VBR@25°C x (1+αT x (TJ - 25)) (αT:Temperature Coefficient) ■ Meet MSL level1, per J-STD-020, LF maximun peak of 260°C ■ Matte tin lead–free plated ■ Halogen free and RoHS compliant ■ Glass passivated chip junction ■ 2nd level interconnect is Pb■ 5000W peak pulse power free per IPC/JEDEC J-STDcapability at 10/1000μs 609A.01 waveform, repetition rate ■ Recognized to UL 497B (duty cycles):0.01% as an Isolated Loop Circuit ■ Fast response time: typically less than 1.0ps from 0V to VBR min Protector Applications 5.0SMDJxxS-HRA components are ideal for the high reliability protection of I/O Interfaces, VCC bus and other vulnerable circuits. Functional Diagram Bi-directional Cathode Anode Uni-directional © 2022 Littelfuse, Inc. Specifications are subject to change without notice. Revised: F.W.06/28/22 TVS Diode Datasheet 5.0SMDJxxS-HRA Surface Mount – 5000W – DO-214AB Electrical Characteristics (T =25°C unless otherwise noted) A Part Number (Uni) 5.0SMDJ6.0AS-HRA 5.0SMDJ6.5AS-HRA 5.0SMDJ7.0AS-HRA 5.0SMDJ7.5AS-HRA 5.0SMDJ8.0AS-HRA 5.0SMDJ8.5AS-HRA 5.0SMDJ9.0AS-HRA 5.0SMDJ10AS-HRA 5.0SMDJ11AS-HRA 5.0SMDJ12AS-HRA 5.0SMDJ13AS-HRA 5.0SMDJ14AS-HRA 5.0SMDJ15AS-HRA 5.0SMDJ16AS-HRA 5.0SMDJ17AS-HRA 5.0SMDJ18AS-HRA 5.0SMDJ20AS-HRA 5.0SMDJ22AS-HRA 5.0SMDJ24AS-HRA 5.0SMDJ26AS-HRA 5.0SMDJ28AS-HRA 5.0SMDJ30AS-HRA 5.0SMDJ33AS-HRA 5.0SMDJ36AS-HRA 5.0SMDJ40AS-HRA 5.0SMDJ43AS-HRA 5.0SMDJ45AS-HRA 5.0SMDJ48AS-HRA 5.0SMDJ51AS-HRA 5.0SMDJ54AS-HRA 5.0SMDJ58AS-HRA 5.0SMDJ60AS-HRA Part Number (Bi) 5.0SMDJ6.0CAS-HRA 5.0SMDJ6.5CAS-HRA 5.0SMDJ7.0CAS-HRA 5.0SMDJ7.5CAS-HRA 5.0SMDJ8.0CAS-HRA 5.0SMDJ8.5CAS-HRA 5.0SMDJ9.0CAS-HRA 5.0SMDJ10CAS-HRA 5.0SMDJ11CAS-HRA 5.0SMDJ12CAS-HRA 5.0SMDJ13CAS-HRA 5.0SMDJ14CAS-HRA 5.0SMDJ15CAS-HRA 5.0SMDJ16CAS-HRA 5.0SMDJ17CAS-HRA 5.0SMDJ18CAS-HRA 5.0SMDJ20CAS-HRA 5.0SMDJ22CAS-HRA 5.0SMDJ24CAS-HRA 5.0SMDJ26CAS-HRA 5.0SMDJ28CAS-HRA 5.0SMDJ30CAS-HRA 5.0SMDJ33CAS-HRA 5.0SMDJ36CAS-HRA 5.0SMDJ40CAS-HRA 5.0SMDJ43CAS-HRA 5.0SMDJ45CAS-HRA 5.0SMDJ48CAS-HRA 5.0SMDJ51CAS-HRA 5.0SMDJ54CAS-HRA 5.0SMDJ58CAS-HRA - Marking UNI BI 5PABH 5PAEH 5PAFH 5PAGH 5PAKH 5PAMH 5PAPH 5PARH 5PATH 5PAVH 5PAXH 5PAZH 5PBEH 5PBGH 5PBKH 5PBMH 5PBPH 5PBRH 5PBTH 5PBVH 5PBXH 5PBZH 5PCBH 5PCEH 5PCFH 5PCGH 5PCKH 5PCMH 5PCPH 5PCRH 5PCTH 5PCVH 5BABH 5BAEH 5BAFH 5BAGH 5BAKH 5BAMH 5BAPH 5BARH 5BATH 5BAVH 5BAXH 5BAZH 5BBEH 5BBGH 5BBKH 5BBMH 5BBPH 5BBRH 5BBTH 5BBVH 5BBXH 5BBZH 5BCBH 5BCEH 5BCFH 5BCGH 5BCKH 5BCMH 5BCPH 5BCRH 5BCTH - Reverse Stand off Voltage VR (Volts) 6.0 6.5 7.0 7.5 8.0 8.5 9.0 10.0 11.0 12.0 13.0 14.0 15.0 16.0 17.0 18.0 20.0 22.0 24.0 26.0 28.0 30.0 33.0 33.0 36.0 36.0 40.0 40.0 43.0 43.0 45.0 45.0 48.0 48.0 51.0 51.0 54.0 54.0 58.0 58.0 60.0 MIN MAX (mA) Maximum Clamping Voltage VC @ Ipp (V) 6.67 7.22 7.78 8.33 8.89 9.44 10.0 11.1 12.2 13.3 14.4 15.6 16.7 17.8 18.9 20.0 22.2 24.4 26.7 28.9 31.1 33.3 36.7 36.7 40.0 40.0 44.4 44.4 47.8 47.8 50.0 50.0 53.3 53.3 56.7 56.7 60.0 60.0 64.4 64.4 66.7 7.37 7.98 8.60 9.21 9.83 10.4 11.1 12.3 13.5 14.7 15.9 17.2 18.5 19.7 20.9 22.1 24.5 26.9 29.5 31.9 34.4 36.8 40.6 40.6 44.2 44.2 49.1 49.1 52.8 52.8 55.3 55.3 58.9 58.9 62.7 62.7 66.3 66.3 71.2 71.2 73.7 10 10 10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 10.3 11.2 12.0 12.9 13.6 14.4 15.4 17.0 18.2 19.9 21.5 23.2 24.4 26.0 27.6 29.2 32.4 35.5 38.9 42.1 45.4 48.4 53.3 53.3 58.1 58.1 64.5 64.5 69.4 69.4 72.7 72.7 77.4 77.4 82.4 82.4 87.1 87.1 93.6 93.6 96.8 Breakdown Voltage VBR (Volts) @ IT Test Current IT Maximum Peak Pulse Current Ipp (A) Maximum Reverse Leakage IR @ VR (µA) 485.4 446.4 416.7 387.6 367.6 347.2 324.7 294.1 274.7 251.3 232.6 215.5 204.9 192.3 181.2 171.2 154.3 140.8 128.5 118.8 110.1 103.3 93.9 84.4 86.1 77.5 77.6 69.8 72.1 64.8 68.8 61.9 64.7 58.1 60.7 54.6 57.5 51.7 53.5 48.1 51.7 800.0 500.0 200.0 100.0 50.0 20.0 10.0 5.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 Agency Approval X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X Notes: 1. 5.0SMDJxxS-HRA voltage binning can be specified by customer’s request via contacting Littlefuse service 2. For bidirectional type having VR of 10 volts and less, the IR limit is double. © 2022 Littelfuse, Inc. Specifications are subject to change without notice. Revised: F.W.06/28/22 TVS Diode Datasheet 5.0SMDJxxS-HRA Surface Mount – 5000W – DO-214AB Screen Process 100% Vision Inspection MIL-STD-750 method 2074 100% High Temperature Storage Life (168hrs,175°C) MIL-STD-750 method 1031 100% X-RAY inspection MIL-STD-750 method 2076 100% Temperature Cycle Test (-55 to150°C, 20 cycles, dwell time 15 min) MIL-STD-750 method 1051 100% Reflow (2X) JEDEC J-STD-020 100% Surge Test (2x) MIL-STD-750 method 4066 100% HTRB 150°C Bias=VR (80% breakdown voltage, 96hrs, and each direction 96hrs for Bi-directional products) MIL–STD–750 method 1038 Final Electrical Test( 100% 3 sigma limit, 100% dynamic test and PAT limit) MIL-STD-750 method 4016.4021.4011 Note: Up-screen program can be specified by customer’s request via contacting Littlefuse service I-V Curve Characteristics Uni-directional I I Bi-directional Ipp Vc VBR VR IR VF IT Vc VBR VR V IT IR IR IT Ipp PPPM VR VBR VC IR VF VR VBR Vc V Ipp Peak Pulse Power Dissipation -- Max power dissipation Stand-off Voltage -- Maximum voltage that can be applied to the TVS without operation Breakdown Voltage -- Maximum voltage that flows though the TVS at a specified test current (IT) Clamping Voltage -- Peak voltage measured across the TVS at a specified Ippm (peak impulse current) Reverse Leakage Current -- Current measured at VR Forward Voltage Drop for Uni-directional Ratings and Characteristic Curves (T =25°C unless otherwise noted) A Figure 2: Peak Pulse Power Rating Figure 1: TVS Transients Clamping Waveform Voltage Transients PPPM-Peak Pulse Power (KW) 1000 Voltage or Current Voltage Across TVS Current Through TVS TJ initial = Tamb 100 5kW at 10/1000µs, 25°C 10 1 0.001 Time 0.01 0.1 1 10 td-Pulse Width (ms) © 2022 Littelfuse, Inc. Specifications are subject to change without notice. Revised: F.W.06/28/22 TVS Diode Datasheet 5.0SMDJxxS-HRA Surface Mount – 5000W – DO-214AB Figure 3: Peak Pulse Power Derating Curve Figure 4: Pulse Waveform 150 IPPM- Peak Pulse Current, % IRSM Peak Pulse Power (PPP) or Current (IPP) Derating in Percentage % 100 80 60 40 20 0 0 25 50 75 100 125 150 TJ - Initial Junction Temperature (ºC) tr=10µsec TJ=25°C Pulse Width(td) is defined as the point where the peak current decays to 50% of IPPM Peak Value IPPM 100 Half Value IPPM IPPM ( ) 2 50 175 0 10/1000µsec. Waveform as defined by R.E.A td 1.0 0 2.0 3.0 4.0 t-Time (ms) Figure 5: Typical Junction Capacitance Figure 6: Typical Transient Thermal Impedance Transient Thermal Impedance ( °C/W) 1000000 Uni-direconal V=0V Cj(pF) 100000 Bi - direconal V=0V 10000 Uni - direconal V=VR 1000 Bi-direconal V=VR 100 10 100 10 1 0.1 0.01 1 10 VBR - Reverse Breakdown Voltage(V) 100 0.001 0.01 0.1 1 10 100 1000 T P - Pulse Duraon (s) © 2022 Littelfuse, Inc. Specifications are subject to change without notice. Revised: F.W.06/28/22 TVS Diode Datasheet 5.0SMDJxxS-HRA Surface Mount – 5000W – DO-214AB Soldering Parameters Lead–free assembly Pre Heat - Temperature Min (Ts(min)) 150°C - Temperature Max (Ts(max)) 200°C - Time (min to max) (ts) 60 – 120 secs Average ramp up rate (Liquidus Temp (TL) to peak 3°C/second max 3°C/second max TS(max) to TA - Ramp-up Rate Reflow - Temperature (TL) (Liquidus) 217°C - Time (min to max) (TS) 60 – 150 seconds Peak Temperature (TP) 260+0/-5 °C Time within 5°C of actual peak Temperature (tp) 30 seconds Ramp-down Rate 6°C/second max Time 25°C to peak Temperature (TP) 8 minutes Max. Do not exceed 260°C Physical Specifications tP TP Temperature Reflow Condition Critical Zone TL to TP Ramp-up TL TS(max) tL Ramp-do Ramp-down Preheat TS(min) 25 tS time to peak temperature Time Environmental Specifications Weight 0.007 ounce, 0.21 grams High Temp. Storage JESD22-A103 Case JEDEC DO214AB. Molded plastic body over glass passivated junction HTRB JESD22-A108 Terminal Matte Tin-plated leads, Solderable per JESD22-B102 Temperature Cycling JESD22-A104 MSL JEDEC-J-STD-020, LEVEL 1 H3TRB JESD22-A101 RSH JESD22-A111 Dimensions DO-214AB (SMC J-Bend) Dimensions C A B H D E Inches Millimeters Min Max Min Max A 0.114 0.126 2.900 3.200 B 0.260 0.280 6.600 7.110 C 0.220 0.245 5.590 6.220 D 0.079 0.103 2.060 2.620 E 0.030 0.060 0.760 1.520 F - 0.008 - 0.203 G 0.305 0.320 7.750 8.130 H 0.006 0.012 0.152 0.305 F I 0.129 - 3.300 - J 0.094 - 2.400 - K J Dimensions in inches and L (millimeters) K - 0.165 - 4.200 L 0.094 - 2.400 - G I Solder Pads (all dimensions in mm) © 2022 Littelfuse, Inc. Specifications are subject to change without notice. Revised: F.W.06/28/22 TVS Diode Datasheet 5.0SMDJxxS-HRA Surface Mount – 5000W – DO-214AB Part Numbering System Part Marking System 5.0SMDJ xx C A S -HR A Cathode Band F Without Group B Test High Reliability DESIGN CODE XXXX YMXXX 5% VBR VOLTAGE TOLERANCE BI-DIRECTIONAL VR VOLTAGE Littelfuse Logo Marking Code Trace Code Marking Y:Year Code M: Month Code XXX: Lot Code SERIES Packing Options Part Number Component Package Quantity Packaging Option Packaging Specification 5.0SMDJxxS-HRA 5.0SMDJxxSHRAT7 DO-214AB DO-214AB 3000 500 Tape & Reel - 16mm tape/13” reel Tape & Reel - 16mm tape/7” reel EIA STD RS-481 EIA STD RS-481 Tape and Reel Specification 0.157 (4.0) Cathode 0.63 (16.0) 0.315 (8.0) Optional 7” 7.0 (187) 13” 13.0 (330) 0.80 (20.2) Arbor Hole Dia. 0.65 (16.4) 0.059 DIA (1.5) Cover tape Dimensions are in inches (and millimeters). Direction of Feed Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at http://www.littelfuse.com/disclaimer-electronics. © 2022 Littelfuse, Inc. Specifications are subject to change without notice. Revised: F.W.06/28/22