55075-00-04-D

www.hamlin.com 55075 Geartooth Hall Effect Sensor Features and Benefits Features • Rotary position geartooth sensor • Stainless steel M12 threaded barrel • Electronic protection against severe and automotive environments • Self adjusting magnetic range • 3 wire (voltage output) • EMC protection (consult Hamlin) • Short circuit/reverse voltage protection • Zero speed detection Benefits • Long life; up to 20 billion operations • High speed operation • No chopper delay • Unaffected by harsh environments • Rotary orientation not critical • On-chip 10 bit A/D converter • Customer selection of cable length and connector type Applications • • • • Geartooth sensor Camshaft sensor Linear encoder Rotary encoder DIMENSIONS (in) mm BLOCK DIAGRAM SPECIFICATIONS Hall Type Supply Voltage (Note 1) Output High Voltage Output Low Voltage Output Current (continuously on) Current Consumption Switching Speed Temperature Operating Storage Maximum Operation Overvoltage Protection Vdc Vdc Vdc-max Vdc-min Vdc-max mA-max mA-min mA-max kHz-max O O Digital Switch 3 Wire ( Voltage Output) -25 to +25.2 4.75 to 25.2 27 VDD - 2 (sinking outputs with internal pull-up resistor) 0.6 @ 20mA 20 1 10.5 15 -40 to +85 -65 to +85 C C Note 1 - As long as Tj (Junction Temperature) is not exceeded APPLICATION EXAMPLE - Geartooth Sensor CUSTOMER OPTIONS - Cable Length and Termination TABLE 1 Cable Length Options:(Cable Type 24 AWG 7/32 PVC 105oC, Double Insulated) TABLE 2 Termination Options:SELECT OPTION DESCRIPTION (.059") 1.5mm Typical SELECT OPTION CABLE LENGTH A B C D Tinned leads Crimped terminals 6.35mm fastons AMP MTE 2.54mm pitch JST XHP 2.5mm pitch (in) 01 mm (3.94) 100 (11.81) 300 (19.69) 500 (29.53) 750 (39.37) 1000 E Typical Output 02 03 04 05 ORDERING INFORMATION 55075 Series 55075 Cable Length Termination Hamlin USA Hamlin UK Hamlin Germany Hamectrol France Tel: Tel: Tel: Tel: 00 XX X Table 1 Table 2 INFORMATION PROVIDED ON THIS DATA SHEET IS PROVIDED FOR INFORMATION PURPOSES ONLY AND SHOULD NOT BE RELIED UPON AS BEING ACCURATE FOR ANY PARTICULAR PURPOSE. Product performance may be affected by the application to which the product is put. Upon request, HAMLIN will assist purchasers by providing information specific to any particular application. HAMLIN disclaims any and all liability whatsoever for any purchaser’s reliance upon the information contained on this data sheet without further consultation with authorised representatives of HAMLIN. +1 920 648 3000 • Fax: +1 920 648 3001 • Email: sales.us@hamlin.com +44 (0)1379 649700 • Fax: +44 (0)1379 649702 • Email: sales.uk@hamlin.com +49 (0) 6142 923920 • Fax: +49 (0) 6142 923921 • Email: sales.de@hamlin.com +33(0) 1 6047 3000 • Fax: +33(0) 1 6015 9136 • Email: sales.fr@hamlin.com Issue No: AF Date: 05.02.09 DCR B6092