55110-3H-02-C

www.hamlin.com 55110 L.E.D. Flange Mount Hall Effect Sensor Features and Benefits Features • Magnetically operated position sensor • Digital or latching types available • Integral LED • Medium or high senstivities • 3 wire (voltage output) • Vibration 50g max. @ 50-2,000Hz • Shock 150g max. @ 11ms 1/2 Sine • EMC to DIN 40839 (Consult Hamlin) • Reverse/Over Voltage Protection • Built in temperature compensation Benefits • • • • • • High switching speed up to 10kHz Long life; up to 20 billion operations Visual indication of operation Unaffected by harsh environments Operates in static or dynamic magnetic field Customer selection of cable length and connector type Applications • • • • • • Position and limit sensing RPM measurement Flow metering Commutation of brushless dc motors Angle sensing Magnetic encoders DIMENSIONS (in) mm BLOCK DIAGRAMS Note Add capacitor Cn as shown, close for the sensor, for transient suppression if required CUSTOMER OPTIONS - Switching Specifications SPECIFICATIONS Hall Type Absolute Ratings Operate Overvoltage Protection Vdc Vdc Vdc-max Vdc-min Vdc-max mA-max kHz-max Operating Storage O O Digital Switch or Digital Latch 3 Wire (Voltage output) -15 to +28 +3.8 to +24 32 Vdd-2 @ 0.1mA (sinking output with internal pull-up) 0.4 @ 20mA 20 10 -40 to +85 -65 to +85 Supply Voltage (Note 1) Output High Voltage Output Low Voltage Output Current (continuously on) Switching Speed Temperature C C Note 1 - As long as Tj (Junction Temperature) max. is not exceeded CUSTOMER OPTIONS - Sensitivity, Cable Length and Termination Specification TABLE 1 HALL OPTIONS ACTIVATE DISTANCES ARE APPROXIMATE USING NEFEB MAGNET TABLE 2 N S d Cable Length:(Cable type 24 AWG 7/32 PVC 105oC Double Insulated) SELECT OPTION LENGTH TABLE 3 Termination Options:SELECT OPTION DESCRIPTION (.827L X HAMLIN P/N .276W X .185H) 21 5812334000 X 7 X 4.7 (in) mm A B C D E Tinned leads Crimped terminals 6.35mm fastons AMP MTE 2.54mm pitch JST XHP 2.5mm pitch Select Hall Option 3M Hall Type 3 Wire Switch Sensitivity Gauss (Typ.) 130 Activate - d (in) mm (.492) 12.5 01 02 03 (3.94) 100 (11.81) 300 (19.69) 500 (29.53) 750 (39.37) 1000 3H 3 Wire Switch 59 (.709) 18.0 04 05 3L 3 Wire Latch 86 (.394) 10.0 ORDERING INFORMATION 55110 Series 55110 Hall option Cable Length Termination Table 1 Table 2 Table 3 XX XX X Hamlin USA Hamlin UK Hamlin Germany Hamectrol France Tel: Tel: Tel: Tel: +1 920 648 3000 • Fax: +1 920 648 3001 • Email: sales.us@hamlin.com +44 (0)1379 649700 • Fax: +44 (0)1379 649702 • Email: sales.uk@hamlin.com +49 (0) 6142 923920 • Fax: +49 (0) 6142 923921 • Email: sales.de@hamlin.com +33 (0) 1 4687 0202 • Fax: +33 (0) 1 4686 6786 • Email: sales.fr@hamlin.com INFORMATION PROVIDED ON THIS DATA SHEET IS PROVIDED FOR INFORMATION PURPOSES ONLY AND SHOULD NOT BE RELIED UPON AS BEING ACCURATE FOR ANY PARTICULAR PURPOSE. Product performance may be affected by the application to which the product is put. Upon request, HAMLIN will assist purchasers by providing information specific to any particular application. HAMLIN disclaims any and all liability whatsoever for any purchaser’s reliance upon the information contained on this data sheet without further consultation with authorised representatives of HAMLIN. Issue No: AC Date:05/02/09 DCR B6092