55140-3L-04-C

www.hamlin.com 55140 Flange Mount Hall Effect Sensor Features and Benefits Features • Magnetically operated position sensor • Digital, latching or programmable analogue types available • Medium, high or programmable sensitivities • 3 wire (voltage output) or 2 wire (current output) versions • Vibration 50g max. @ 50-2,000Hz • Shock 150g max. @ 11ms 1/2 Sine • EMC to DIN 40839 (Consult Hamlin) • Reverse/Over Voltage Protection • Built in temperature compensation Benefits • • • • • High switching speed up to 10kHz Long life; up to 20 billion operations Unaffected by harsh environments Operates in static or dynamic magnetic field Customer selection of cable length and connector type Applications • • • • • • Position and limit sensing RPM measurement Flow metering Commutation of brushless dc motors Angle sensing Magnetic encoders DIMENSIONS (in) mm BLOCK DIAGRAMS Notes 1) Add capacitor Cn as shown, close to the sensor, for transient suppression if required 2) Add resistor Rpu as shown for sinking output CUSTOMER OPTIONS - Switching Specifications SPECIFICATIONS Hall Type Absolute Ratings Operate Overvoltage Protection Vdc Vdc Vdc-max Vdc Vdc-max mA-max Low High Operating Storage mA mA kHz-max O O Digital Switch or Digital Latch 3 Wire (Voltage output) -15 to +28 +3.8 to +24 32 sinking output 0.4 @ 20mA 20 1.6 - 5.2 1.6 - 5.2 10 -40 to +100 -65 to +105 2 Wire (Current Output) -15 to +28 +3.75 to +24 32 N/A N/A N/A 5-6.9 12-17 10 -40 to +100 -65 to +105 A - Analogue (Programmable Only) (Note 2) 8.5 4.5-5.5 19.5 4.65 0.35 -1.0 to +1.0 2 - 10 2 - 10 2 -40 to +100 -65 to +150 Supply Voltage (Note 1) Output High Voltage Output Low Voltage Output Current (continuously on) Current Consumption over Temperature Range Switching Speed Temperature C C Note 1 - As long as Tj (Junction Temperature) max. is not exceeded Note 2 - Preprogrammed by Hamlin or Customer pending agreement CUSTOMER OPTIONS - Sensitivity, Cable Length and Termination Specification TABLE 1 HALL OPTIONS ACTIVATE DISTANCES ARE APPROXIMATE USING NEFEB MAGNET TABLE 2 NS Sensitivity Gauss (Typ.) 120 57 40 130 59 86 Programmable d Cable Length:(Cable Type 24 AWG 7/32 PVC 105oC UL1430/UL1569) TABLE 3 Termination Options:SELECT OPTION DESCRIPTION (2 WIRE VERSION ILLUSTRATED) (.827L X HAMLIN P/N .276W X .185H) 21 5812334000 X 7 X 4.7 Standard Lengths Activate - d (in) mm (.531) 13.5 (.728) 18.5 (.827) 21.0 (.492) 12.5 (.709) 18.0 (.394) 10.0 Consult Hamlin SELECT OPTION CABLE LENGTH A B C D E Tinned leads Crimped terminals 6.35mm fastons AMP MTE 2.54mm pitch JST XHP 2.5mm pitch Select Hall Option 2M 2H 2L 3M 3H 3L AP Hall Type 2 Wire Switch 2 Wire Switch 2 Wire Latch 3 Wire Switch 3 Wire Switch 3 Wire Latch Analogue (in) 01 02 03 04 05 mm (3.94) 100 (11.81) 300 (19.69) 500 (29.53) 750 (39.37) 1000 ORDERING INFORMATION 55140 Series 55140 Hall option Cable Length Termination Table 1 Table 2 Table 3 XX XX X Hamlin USA Hamlin UK Hamlin Germany Hamectrol France Tel: Tel: Tel: Tel: +1 920 648 3000 • Fax: +1 920 648 3001 • Email: sales.us@hamlin.com +44 (0)1379 649700 • Fax: +44 (0)1379 649702 • Email: sales.uk@hamlin.com +49 (0) 6142 923920 • Fax: +49 (0) 6142 923921 • Email: sales.de@hamlin.com +33 (0) 1 4687 0202 • Fax: +33 (0) 1 4686 6786 • Email: sales.fr@hamlin.com INFORMATION PROVIDED ON THIS DATA SHEET IS PROVIDED FOR INFORMATION PURPOSES ONLY AND SHOULD NOT BE RELIED UPON AS BEING ACCURATE FOR ANY PARTICULAR PURPOSE. Product performance may be affected by the application to which the product is put. Upon request, HAMLIN will assist purchasers by providing information specific to any particular application. HAMLIN disclaims any and all liability whatsoever for any purchaser’s reliance upon the information contained on this data sheet without further consultation with authorised representatives of HAMLIN. Issue No: AD Date: 05/02/09 DCR B6092