5KP160A

Transient Voltage Suppression Diodes Axial Leaded – 5000W > 5KP series RoHS 5KP Series Description The 5KP Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features t
-PX
JODSFNFOUBM
TVSHF
resistance t
5ZQJDBM
*R less than 2μA above 12V ΔVBR = 0.1% x VBR@25°C x ΔT t
)JHI
UFNQFSBUVSF
soldering guaranteed: t
(MBTT
QBTTJWBUFE
DIJQ
260°C/40 seconds / 0.375”, junction in P600 package (9.5mm) lead length, 5 t
8
QFBL
QVMTF
lbs., (2.3kg) tension capability at 10×1000μs t
1MBTUJD
QBDLBHF
IBT
waveform, repetition rate Underwriters Laboratory (duty cycles):0.01% Flammability classification t
'BTU
SFTQPOTF
UJNF
94V-O typically less than 1.0ps t
.BUUF
5JO
-FBEoGSFF
QMBUFE from 0 Volts to BV min t
&YDFMMFOU
DMBNQJOH
capability Agency Approvals AGENCY AGENCY FILE NUMBER E128662/E230531 Maximum Ratings and Thermal Characteristics (TA=25OC unless otherwise noted) Parameter Symbol Value Unit PPPM 5000 W PD 8.0 W IFSM 400 A VF 3.5/5.0 V TJ , TSTG -55 to 175 °C Typical Thermal Resistance Junction to Lead RuJL 8.0 °C/W Typical Thermal Resistance Junction to Ambient RuJA 40 °C/W Peak Pulse Power Dissipation by 10x1000μs test waveform (Fig.1) (Note 1) Steady State Power Dissipation on inifinite heat sink at TL=75ºC (Fig. 5) Peak Forward Surge Current, 8.3ms Single Half Sine Wave Unidirectional only (Note 2) Maximum Instantaneous Forward Voltage at 100A for Unidirectional only (Note 3) Operating Junction and Storage Temperature Range Applications TVS devices are ideal for the protection of I/O interfaces, VCC bus and other vulnerable circuits used in telecom, computer, industrial and consumer electronic applications. Notes: 1. Non-repetitive current pulse , per Fig. 3 and derated above TA = 25OC per Fig. 2. 2. Measured on 8.3ms single half sine wave or equivalent square wave, duty cycle=4 per minute maximum. 3. VF