72R135XF

POLY-FUSE® Resettable PTCs Radial Leaded > 72R Series 72R Series RoHS Description The 72R Series is designed to provide overcurrent protection to 72Vdc maximum voltage with a maximum 40A short circuit rating. Features • 72Vdc max voltage w/max • Resettable feature 40A short circuit rating • Ideal for a broad range of • RoHS-compliant, Lead-Free general electronics using a and Halogen Free* low voltage power supply Applications • Load protection on wide • Computer peripherals range of low voltage power • General electronics supplies Agency Approvals Agency Agency File Number • Computers E183209 R50119318 Additional Information Datasheet Samples Resources Electrical Characteristics Part Number I hold (A) I trip (A) V max (Vdc) I max (A) Pd typ. (W) Maximum Time To Trip Current Time (A) (Sec.) Resistance R min R 1max (Ω) (Ω) Agency Approvals 72R020X 0.20 0.40 72 40 0.41 1.00 2.20 1.830 4.400 X X 72R030X 0.30 0.60 72 40 0.49 1.50 3.00 0.880 2.100 X X 72R040X 0.40 0.80 72 40 0.56 2.00 3.80 0.550 1.290 X X 72R050X 0.50 1.00 72 40 0.77 2.50 4.00 0.500 1.170 X X 72R065X 0.65 1.30 72 40 0.88 3.25 5.30 0.310 0.720 X X 72R075X 0.75 1.50 72 40 0.92 3.75 6.30 0.250 0.600 X X 72R090X 0.90 1.80 72 40 0.99 4.50 7.20 0.200 0.470 X X 72R110X 1.10 2.20 72 40 1.50 5.50 8.20 0.150 0.380 X X 72R135X 1.35 2.70 72 40 1.70 6.75 9.60 0.120 0.300 X X 72R160X 1.60 3.20 72 40 1.90 8.00 11.40 0.090 0.220 X X 72R185X 1.85 3.70 72 40 2.10 9.25 12.60 0.080 0.190 X X 72R250X 2.50 5.00 72 40 2.50 12.50 15.60 0.050 0.130 X X 72R375X 3.75 7.50 72 40 3.20 18.75 24.00 0.030 0.080 X X CAUTION: Operation beyond the specified rating may result in damage and possible arcing and flame. I hold = Hold current: maximum current device will pass without tripping in 20°C still air. I trip = Trip current: minimum current at which the device will trip in 20°C still air. Vint = Maximum voltage the device can withstand without damage at rated current (I max) Vop = The device regular operation voltage I max = Maximum fault current device can withstand without damage at rated voltage (Vmax) P d = Power dissipated from device when in the tripped state at 20°C still air. R min = Minimum resistance of device in initial (un-soldered) state. R typ = Typical resistance of device in initial (un-soldered) state. R 1max = Maximum resistance of device at 20°C measured one hour after tripping. * Effective February 11, 2010 onward, all 600R PTC products will be manufactured Halogen Free (HF). Existing Non-Halogen Free 600R PTC products may continue to be sold, until supplies are depleted. This change will have no effect on 600R product specifications or performance. WARNING • Users shall independently assess the suitability of these devices for each of their applications • Operation of these devices beyond the stated maximum ratings could result in damage to the devices and lead to electrical arcing and/or fire • These devices are intended to protect against the effects of temporary over-current or over-temperature conditions and are not intended to perform as protective devices where such conditions are expected to be repetitive or prolonged in duration • Exposure to silicon-based oils, solvents, electrolytes, acids, and similar materials can adversely affect the performance of these PPTC devices • These devices undergo thermal expansion under fault conditions, and thus shall be provided with adequate space and be protected against mechanical stresses • Circuits with inductance may generate a voltage (L di/dt) above the rated voltage of the PPTC device. © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: BO.12/07/20 POLY-FUSE® Resettable PTCs Radial Leaded > 72R Series Temperature Rerating Ambient Operation Temperature -40°C -20°C 0°C 20°C Part Number 40°C 50°C 60°C 70°C 85°C 0.08 Hold Current (A) 72R020X 0.31 0.27 0.24 0.20 0.16 0.14 0.13 0.11 72R030X 0.47 0.41 0.36 0.30 0.24 0.22 0.19 0.16 0.12 72R040X 0.62 0.54 0.48 0.40 0.32 0.29 0.25 0.22 0.16 72R050X 0.78 0.68 0.60 0.50 0.41 0.36 0.32 0.27 0.20 72R065X 1.01 0.88 0.77 0.65 0.53 0.47 0.41 0.35 0.26 72R075X 1.16 1.02 0.89 0.75 0.61 0.54 0.47 0.41 0.30 72R090X 1.40 1.22 1.07 0.90 0.73 0.65 0.57 0.49 0.36 72R110X 1.71 1.50 1.31 1.10 0.89 0.79 0.69 0.59 0.44 72R135X 2.09 1.84 1.61 1.35 1.09 0.97 0.85 0.73 0.54 0.64 72R160X 2.48 2.18 1.90 1.60 1.30 1.15 1.01 0.86 72R185X 2.87 2.52 2.20 1.85 1.50 1.33 1.17 1.00 0.74 72R250X 3.88 3.40 2.98 2.50 2.03 1.80 1.58 1.35 1.00 72R375X 5.81 5.10 4.46 3.75 3.04 2.70 2.36 2.03 1.50 170% 72R 130% 90% 1000 70% 50% 30% 1 10000 110% 10% Time in Seconds Time in Seconds 10 250R 100000 150% Percentage of Rated Current 3.75A 0.30A 0.40A 0.50A 0.65A 0.75A 0.90A 1.10A 1.35A 1.60A 1.85A 2.50A 0.20A 100 0.080A 0.120A 0.145A 0.180A Temperature Rerating Curve Average Time Current Curves -40 -30 -20 100 10 -10 0 10 20 30 40 Temperature (°C) 50 60 70 80 1 0.1 Note: Typical Temperature rerating curve, refer to table for derating data 0.1 0.01 0.01 0.1 1 10 100 Current in Amperes 0.1 1 10 Current in Amperes The average time current curves and Temperature Rerating curve performance is affected by a number or variables, and these curves provided as guidance only. Customer must verify the performance in their application. © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: BO.12/07/20 100 POLY-FUSE® Resettable PTCs Radial Leaded > 72R Series Soldering Parameters - Wave Soldering Refer to the condition recommended by the flux manufacturer. Max. ramping rate should not exceed 4°C/Sec. Soldering Zone Max. solder temperature should not exceed 260°C. Time within 5°C of actual Max. solder temperature within 3 - 5 seconds. Total time from 25°C room to Max. solder temperature within 5 minutes including Pre-Heating time. Cooling Zone Cooling by natural convection in air. Max. ramping down rate should not exceed 6°C/Sec. Soldering 260 Cooling 220 Temperature (°C) Pre-Heating Zone 190 160 Preheating 0 60 min. 5 max. Time(s) Physical Specifications Lead Material 0.20-0.40A: Tin-plated Copper clad steel 0.50-3.75A: Tin-plated Copper Soldering Characteristics Solderability per MIL–STD–202, Method 208 Insulating Material Lead Solderability Cured, flame retardant epoxy polymer meets UL 94V0 requirements. Marked with ‘LF’, voltage, current rating, and date code. Environmental Specifications Operating/Storage Temperature Maximum Device Surface Temperature in Tripped State -40°C to +85°C 125°C Solvent Resistance +85°C, 1000 hours -/+5% typical resistance change +85°C, 85% R.H. 1000 hours -/+5% typical resistance change +85°C to -40°C 10 times -/+5% typical resistance change MIL–STD–202, Method 215 Moistrue Sesitivity Level Level 1, J–STD–020 Passive Aging Humidity Aging Thermal Shock © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: BO.12/07/20 POLY-FUSE® Resettable PTCs Radial Leaded > 72R Series Dimensions Part Marking System E A Single Sided Marking Littelfuse Trademark Voltage Rating Current Rating 72 020X XXXX Littelfuse Trademark Date Code (Contact Littelfuse for additional information) B D F C Part Number 72R020X 72R030X 72R040X 72R050X 72R065X 72R075X 72R090X 72R110X 72R135X 72R160X 72R185X 72R250X 72R375X A B C D E F Physical Characteristics Inches mm Inches mm Inches mm Inches mm Inches mm Inches mm Max. 0.29 0.29 0.30 0.31 0.37 0.40 0.44 0.51 0.53 0.60 0.66 0.78 1.04 Max. 7.4 7.4 7.6 7.9 9.4 10.2 11.2 13.0 13.58 15.36 16.76 19.93 26.3 Max. 0.46 0.50 0.53 0.54 0.57 0.60 0.62 0.72 0.78 0.85 0.91 1.03 1.22 Max. 11.7 12.7 13.5 13.7 14.5 15.2 15.8 18.2 19.8 21.6 23.0 26.2 31.1 Typ. 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.40 0.40 Typ. 5.1 5.1 5.1 5.1 5.1 5.1 5.1 5.1 5.1 5.1 5.1 10.2 10.2 Min. 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 Min. 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 Max. 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 Max. 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 Typ. 0.047 0.047 0.047 0.047 0.047 0.047 0.047 0.055 0.055 0.055 0.055 0.055 0.055 Typ. 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.4 1.4 1.4 1.4 1.4 1.4 Lead (dia) Inches 0.02 0.02 0.02 0.02 0.02 0.02 0.02 0.03 0.03 0.03 0.03 0.03 0.03 mm 0.51 0.51 0.51 0.51 0.51 0.51 0.51 0.81 0.81 0.81 0.81 0.81 0.81 Material Sn/CuFe Sn/CuFe Sn/CuFe Sn/Cu Sn/Cu Sn/Cu Sn/Cu Sn/Cu Sn/Cu Sn/Cu Sn/Cu Sn/Cu Sn/Cu Part Ordering Number System 72 R 090 X P R Packaging Style Blank: Bulk R: Tape & Ammo Series Quantity Code: F=200 H=100 M=1000 P=2000 U=500 Type: X (72VDC) IHOLD Current Code (Refer to Packaging or Electrical Characteristics tables) R: Radial Voltage Rating (Vdc) © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: BO.12/07/20 Littelfuse Trademark POLY-FUSE® Resettable PTCs Radial Leaded > 72R Series Packaging Ordering Part Number 72R020XPR 72R030XPR 72R040XPR 72R050XPR 72R065XPR 72R075XPR 72R090XPR 72R110XU 72R110XMR 72R135XF 72R135XMR 72R160XF 72R160XMR 72R185XMR 72R250XF 72R250XMR 72R375XH Part Number 72R020X 72R030X 72R040X 72R050X 72R065X 72R075X 72R090X 72R110X 72R135X 72R160X 72R185X 72R250X 72R375X I hold (A) 0.20 0.30 0.40 0.50 0.65 0.75 0.90 I hold Code Packaging Option Quantity Quantity & Packaging Codes 020 030 040 050 065 075 090 Tape and Ammo Tape and Ammo Tape and Ammo Tape and Ammo Tape and Ammo Tape and Ammo Tape and Ammo Bulk Tape and Ammo Bulk Tape and Ammo Bulk Tape and Ammo Tape and Ammo Bulk Tape and Ammo Bulk 2000 2000 2000 2000 2000 2000 2000 500 1000 200 1000 200 1000 1000 200 1000 100 PR PR PR PR PR PR PR U MR F MR F MR MR F MR H 1.10 110 1.35 135 1.60 160 1.85 185 2.50 250 3.75 375 Tape and Ammo Diagram Figure 1 ∆h ∆h ∆h ∆p Reference plane A1 H1 H1 C1 H C2 F A L B H0 W4 W5 W I2 L1 P0 D0 Direction of unreeling Cross section A - B t WARNING • Users shall independently assess the suitability of these devices for each of their applications • Operation of these devices beyond the stated maximum ratings could result in damage to the devices and lead to electrical arcing and/or fire • These devices are intended to protect against the effects of temporary over-current or over-temperature conditions and are not intended to perform as protective devices where such conditions are expected to be repetitive or prolonged in duration • Exposure to silicon-based oils, solvents, electrolytes, acids, and similar materials can adversely affect the performance of these PPTC devices • These devices undergo thermal expansion under fault conditions, and thus shall be provided with adequate space and be protected against mechanical stresses Reel • Circuits with inductance may generate a voltage (L di/dt) above the rated voltage of the PPTC device. Upper side Direction of unreeling Tape Lower side w1 w2 Cross section Optional shape: Circular or polygonal © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: BO.12/07/20 POLY-FUSE® Resettable PTCs Radial Leaded > 72R Series Tape and Ammo Specifications Devices taped using EIA468-B/IE286-2 standards. See table below and Figure 1 for details. Dimension Carrier tape width EIA Mark IEC Mark W Dimensions Dim. (mm) Tol. (mm) W 18 –0.5 / +1.0 Hold down tape width W4 W0 11 min. Top distance between tape edges W6 W2 3 max. Sprocket hole position W5 W1 9 –0.5 / +0.75 Sprocket hole diameter* D0 D0 4 –0.32 / +0.2 Abscissa to plane (straight lead) H H 18.5 –/+ 3.0 Abscissa to plane (kinked lead) H0 H0 16 –/+ 0.5 Abscissa to top 72R020X–72R090X H1 H1 32.2 max. Abscissa to top 72R110X–72R250X H1 - 47.5 max. Overall width without lead protrusion: 72R020X–72R090X C1 - 42.5 max. Overall width without lead protrusion: 72R110X– 72R250X - - 57 max. Overall width with lead protrusion: 72R020X–72R090X C2 - 43.2 Overall width with lead protrusion: 72R110X–72R250X - 58 - - Lead protrusion L1 l1 1.0 max. Protrusion of cut out L L 11 max. Protrusion beyond hold–down tape l2 l2 Not specified - Sprocket hole pitch: 72R020X–72R090X P0 P0 12.7 –/+ 0.3 Sprocket hole pitch: 72R110X–72R250X P0 P0 25.4 –/+ 0.5 Pitch tolerance - - 20 consecutive. –/+ 1 Device pitch: 72R020X–72R090X - - 12.7 - Device pitch: 72R110X–72R250X - - 25.4 - Tape thickness t t 0.9 max. Tape thickness with splice t1 - 2.0 max. Splice sprocket hole alignment - - 0 –/+ 0.3 Body lateral deviation Δh Δh 0 –/+ 1.0 Body tape plane deviation Δp Δp 0 –/+ 1.3 Ordinate to adjacent component lead*: 72R020X–72R090X P1 P1 3.81 –/+ 0.7 Ordinate to adjacent component lead*: 72R110X–72R250X - - 7.62 –/+ 0.7 Lead spacing: 72R020X–72R185X F F 5.08 –/+ 0.8 Lead spacing: 72R250X–72R250X F F 10.18 –/+ 0.8 *Differs from EIA Specification Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at www.littelfuse.com/disclaimer-electronics. © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: BO.12/07/20