81500000005

Cartridge Fuse Holders Enclosed Fuseholders > Circuit Board Mounted 810/811/813/814 Series Circuit Board Mount Enclosed Fuse Holders RoHS Pb Product Characteristics Compatible Fuse Types 810 Series Holder 815 Cap 810 Series 811 Series 813 Series 814 Series 5×20mm 6.3×32mm 5×20mm 6.3×32mm 5×20mm 6.3×32mm 5×20mm 6.3×32mm Holder/Cap: Black Thermoplastic, UL94 V-0 For 5×20mm Fuses 811 Series Holder Materials Metal Parts: Copper alloy, corrosion protected Terminals: Solderable, tinned Rated Voltage: 250V 813 Series Holder Electrical Data (23ºC) 816 Cap For 6.3×32mm Fuses 814 Series Holder Dimensions 810 Series 811 Series Bayonet-joint Fuse carrier inserted ∅15 m a x . 0 ,2 45,7 max. 0,2 Mounting Bayonet joint ø 12,7 15 5,5 ø 12,7 12,7 Fuse ca rrier i nserted 0,5 27,94 46,3 1 2 ,7 1,9 7,62 Printed circuit board 5 2 -0,05 0 ,6 ø 3 5 Stud 12,7 1 ,6 5 Printed circuit board 1,1 15 5,08 Stud 27,94 5 ,0 8 1 ,3 + 0 ,1 0,5 4,45 1,1 7,62 Holes in the printed circuit board: 1,3 +0,1 5 ,0 8 2 + 0 ,1 7,62 Holes in the printed circuit board: 1,3 +0,1 813 Series Fuse carrier inserted 814 Series m a x .0 , 2 45,7 Soldering Heat Resistance Min Cross Section ø15 Bayonet-joint ø12,7 4 6 ,3 body flange 5 12,7 10 ±0,1 10 1 ,,3 + 0 17,8 7,9 15 Marking 10 ±0,1 1 2 ,7 0,5 2 -0,05 Stud 0,5 1,1 Printed circuit board 5,7 board (4) Solder pins 0.5mm × 1.1mm The pins spaced at 5.08mm form a common connection. (2) Solder pins (2) Solder pins 0.5mm × 1.1mm 0.5mm × and plastic stud 1.1mm IP 40 (IEC 60529) PC2 (IEC 60127-6) -25 °C to 70 °C -25ºC/+70ºC/21 days (IEC 60068-2-1...3) +10ºC to +60ºC relative humidity ≤ 75% yearly average, without dew, maximum value for 30 days - 95% 24 cycles at 15 min. each (IEC 60068-2-6) 10 - 60Hz at 0.75mm amplitude  60 - 2000Hz at 10g acceleration ≤ 5mΩ > 1.5 kV 4 kV, 50 Hz, 1 min., dry > 103 MΩ (500 VDC, 1 min.) Unit Weight 260ºC, 5 sec. (IEC 60068-2-20) Conducting path - 0.2mm2 810, 250V, Approvals 5.4g(Holder) / 2.5g (Cap) 811, 250V, Approvals 5.2g(Holder) / 2.5g (Cap) 813, 250V, Approvals 5.8g (Holder) / 2.5g (Cap) 814, 250V, Approvals 4.6g (Holder) 25g (Cap) Note: Refer to Fuseology for information on proper fuseholder re-rating 13,8 Holes in the printed circuit board: 1,3 +0,1 1,1 +0,1 815/816 Series 0,5 Stud Dimensions Slot for screwdriver Bayonet-connector-nose 10 Part Number 1,3 +0,1 Agency 810 118611 1,5 max. 34 max. 33,2 1,2 Cap 815 Cap 816 811 813 814 Agency File Number 7 17,8 Holes in the printed circuit board: 1,3 +0,1 9 ,2 2 +0,1 ø Printed circuit 0,6 1 ,6 5 3 5,5 (3) Solder pins 0.5mm × 1.1mm and plastic stud. The pins spaced at 5.08mm form a common connection. Rated Power:  1.6W (814+815VDE) 2.5W (814+816VDE) Solderability 235ºC, 3 sec. (Wave) 350ºC, 1 sec. (Soldering Iron) Fuse carrier inserted Bayonet-joint max. 0,2 Protection Class & Category Operating Temperature Climatic Test Stock Conditions Vibration Resistance Contact Resistance Dielectric Strength Impulse Voltage Insulation Resistance Rated Current: 6  .3A (VDE) 16A (UL/CSA) RatedPower:  1.6W (813+815Rated Power:  VDE) 2.5W (VDE) 2.5W (813+816 -VDE) 120642 118349 118347 E70164 47574 © 2019 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 12/19/19 Cartridge Fuse Holders Enclosed Fuseholders > Circuit Board Mounted Ordering Information Additional Information Description Ordering Number Packaging Bulk 100 Cap, 5×20 mm 81500000005 Cap, 6.3×32 mm 81600000005 Bulk 100 810 Series Holder 81000000005 Bulk 100 811 Series Holder 81100000005 Bulk 100 813 Series Holder 81300000005 Bulk 100 814 Series Holder 81400000005 Bulk 100 Datasheet 810 Series Resources 810 Series Samples 810 Series Datasheet 811 Series Resources 811 Series Samples 811 Series Datasheet 813 Series Resources 813 Series Samples 813 Series Datasheet 814 Series Resources 814 Series Samples 814 Series Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at: www.littelfuse.com/disclaimer-electronics. © 2019 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 12/19/19