AK1-076C

TVS Diodes Datasheet AK1 Series Axial Leaded – 1kA RoHS Pb e4 Description The AK1 series of high power TVS diode is specially designed for meeting severe surge test environment of both AC and DC line protection applications. It features a very fast response and ultra low clamping characteristics over traditional metal oxide varistor ( MOV ) solutions. They can be connected in series and / or parallel to create a very high surge current protection solution. Features ■ Very low clamping voltage ■ Ultra compact: less than onetenth the size of traditional discrete solutions ■ Sharp breakdown voltage Additional Information ■ Low slope resistance ■ Symmetric in leads width for easier soldering during assembly. Accessories ■ EFT protection of data lines in accordance with IEC 610004-4 ■ Halogen-free ■ Bi-directional ■ IEC 61000-4-2 ESD 15kV(Air), 8kV (Contact) Resources ■ ESD protection of data lines in accordance with IEC 61000-4-2 Samples ■ RoHS compliant ■ Glass passivated junction ■ Pb-free E4 means 2nd level interconnect is Pb-free and the terminal finish material is Silver Agency Approvals Maximum Ratings and Thermal Characteristics (TA=25OC unless otherwise noted) Parameter Agency Agency File/Certificate Number E128662 Symbol Value Unit Operating Storage Temperature Range TSTG -55 to 150 °C Operating Junction Temperature Range TJ -55 to 125 ºC Current Rating1 IPP 1 kA Functional Diagram Note: 1. Rated IPP measured with 8/20μs pulse. Bi-direcctional Electrical Characteristics (TA=25°C unless otherwise noted) Part Numbers Part Marking AK1 - 076C 1-076C Standoff Voltage (VSO) Volts Max. Reverse Leakage (IR) @VSO µA Typical IR @ 85OC (µA) 76 10 15 Reverse Breakdown Voltage (VBR) @ IT Test Current IT Max. Clamping Max. Temp Voltage Coefficient VCL @ Ipp Peak Pulse OF VBR Current (IPP) (Note 1) Max. Capacitance 0 Bias 10kHz Min Volts Max Volts (mA) VCL Volts IPP Amps (%/OC) (nF) 85 95 10 140 1,000 0.1 8.5 Agency Approval X Note: Using 8/20µS wave shape as defined in IEC 61000-4-5. 1 © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 05/26/21 TVS Diodes Datasheet AK1 Series Axial Leaded – 1kA Flow/Wave Soldering (Solder Dipping) Physical Specifications Weight Contact manufacturer Case Epoxy encapsulated Terminal Silver plated leads, solderable per MIL-STD-750 Method 2026 Peak Temperature : 265OC Dipping Time : 10 seconds Soldering : 1 time Wave Solder Profile Figure 1 Non Lead-free Profile Figure 2 Lead-free Profile 300 300 250 250 200 Temperature (ºC) Temperature (ºC) Maximum Wave 260C Maximum Wave 240C 150 100 50 200 150 100 50 0 0 0. 5 1 1. 5 2 2. 5 3 3. 5 0 4 0 Time (Minutes) 0.5 1 1.5 2 2.5 3 3.5 4 Time (Minutes) Ratings and Characteristic Curves (TA=25°C unless otherwise noted) Figure 3 Peak Power Derating Figure 4 Typical Peak Pulse Power Rating Curve 8/20µs 80 PPPM-Peak Pulse Power (kW) Percent of Rated Value 1000 100 60 40 20 0 0 25 50 75 100 100 10/350µs 10/1000µs 10 1 125 TJ - Initial Junction Temperature (°C) 0.00001 0.0001 0.001 td-Pulse Width (sec.) continues on next page. 2 © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 05/26/21 TVS Diodes Datasheet AK1 Series Axial Leaded – 1kA Ratings and Characteristic Curves (TA=25°C unless otherwise noted) (Continued) Figure 5 Typical VBR Vs Junction Temperature Figure 6 Pulse Waveform 8 IPP – Peak Pulse Current – %IPP Percent of VBR Change 12 10 6 4 2 0 -2 -4 -6 -8 -50 -25 0 25 50 75 100 Peak Value 100 tr = rise time to peak value td = decay time to half value tr x td =8/20µs 50 Half Value 0 125 0 Junction Temperature(Tj ) tr td t – Time (µs) Dimensions A L2 G Dimensions F L1 A B C D E F G L1/L2 D C B E C Part Marking System Inches Millimeters 0.950 +/- 0.040 24.15 +/- 1.00 0.095 +/- 0.024 2.4 +/- 0.60 0.236 +/- 0.039 6.00 +/- 1.00 0.570 max. 14.48 max. 0.050 +/- 0.002 1.270 +/- 0.05 0.500 max. 12.70 max. 0.096 +/- 0.040 2.44 +/- 1.00 L1= L2 tolerance +/- 0.04 inch (1.0 mm) Part Numbering System Marking Code AK1 - XXXX 1-XXXX Stand Off Voltage Series Type LF (Please Refer to Electrical Characteristics Chart) YWW Littelfuse Logo Packing Options Trace Code Marking Y:Year Code WW: Working Week Code Side View Part Number Component Package Quantity Packaging Option AK1-XXXX AK1-XXXX-12 AK Package AK Package 56pcs/Box 12pcs/Box Bulk Bulk Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at www.littelfuse.com/disclaimer-electronics. 3 © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 05/26/21