AK3-076C

TVS Diodes Datasheet AK3 Series Axial Leaded – 3kA RoHS Pb e4 Description The AK3 series of high power TVS diode is specially designed for meeting severe surge test environment of both AC and DC line protection applications. It features a very fast response and ultra low clamping characteristics over traditional metal oxide varistor ( MOV ) solutions. They can be connected in series and / or parallel to create a very high surge current protection solution. Features & Benefits ■ Very low clamping voltage ■ Ultra compact: less than onetenth the size of traditional discrete solutions ■ Sharp breakdown voltage ■ Low slope resistance Additional Information ■ RoHS compliant ■ Glass passivated junction ■ Symmetric in leads width for easier soldering during assembly. Accessories ■ IEC 61000-4-2 ESD 15kV(Air), 8kV (Contact) Samples Maximum Ratings and Thermal Characteristics (TA=25OC unless otherwise noted) Parameter ■ EFT protection of data lines in accordance with IEC 610004-4 ■ Halogen-free ■ Bi-directional ■ FoldbakTM technology for superior clamping factor Resources ■ ESD protection of data lines in accordance with IEC 61000-4-2 ■ Pb-free E4 means 2nd level interconnect is Pb-free and the terminal finish material is Silver Agency Approvals Symbol Value Unit Operating Storage Temperature Range TSTG -55 to 150 °C Operating Junction Temperature Range TJ -55 to 125 ºC Current Rating1 IPP 3 kA Agency Agency File Number E128662 Functional Diagram Note: 1. Rated IPP measured with 8/20μs pulse. Bi-direcctional Electrical Characteristics (TA=25°C unless otherwise noted) Part Numbers AK3 - 015C AK3 - 030C AK3 - 038C AK3 - 058C AK3 - 066C AK3 - 076C AK3 - 150C AK3 - 170C AK3 - 190C AK3 - 208C AK3 - 380C AK3 - 430C Part Marking 3 - 015C 3 - 030C 3 - 038C 3 - 058C 3 - 066C 3 - 076C 3 - 150C 3 - 170C 3 - 190C 3 - 208C 3 - 380C 3 - 430C Standoff Voltage (VSO) Volts 15 30 38 58 66 76 150 170 190 208 380 430 Max. Reverse Leakage (IR) @VSO µA Typical IR @ 85OC (µA) 10 10 10 10 10 10 10 10 10 10 10 10 15 15 15 15 15 15 15 15 15 15 15 15 Reverse Breakdown Voltage (VBR) @ IT Test Max. Clamping Voltage Max. Temp Current VCL @ Ipp Peak Pulse Coefficient Current (IPP) (Note 1) IT OF VBR Max. Capacitance 0 Bias 10kHz Min Volts Max Volts (mA) VCL Volts IPP Amps (%/OC) (nF) 16 32 40 64 72 85 158 179 200 223 401 440 19 37 46 70 80 95 194 220 245 246 443 490 10 10 10 10 10 10 10 10 10 10 10 10 28 90 95 110 120 140 230 260 290 306 520 625 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 12.0 11.0 10.0 6.0 6.0 6.0 2.6 2.4 2.4 2.4 2.0 2.0 Agency Approval X X X X X X X X X X X Note: 1. Using 8/20µS wave shape as defined in IEC 61000-4-5. 1 © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 06/22/21 TVS Diodes Datasheet AK3 Series Axial Leaded – 3kA Flow/Wave Soldering (Solder Dipping) Physical Specifications Weight Contact manufacturer Peak Temperature : 265OC Case Epoxy encapsulated Dipping Time : 10 seconds Terminal Silver plated leads, solderable per MIL-STD-750 Method 2026 Soldering : 1 time Wave Solder Profile Figure 2: Lead-free Profile Figure 1: Non Lead-free Profile 300 300 Maximum Wave 240C Maximum Wave 260C 250 200 Temperature (ºC) Temperature (ºC) 250 150 100 50 200 150 100 50 0 0 0. 5 1 1. 5 2 2. 5 3 3. 5 0 4 0 Time (Minutes) 0.5 1 1.5 2 2.5 3 3.5 4 Time (Minutes) Ratings and Characteristic Curves (TA=25°C unless otherwise noted) Figure 4: Surge Response Figure 3: Peak Power Derating 80 Current (kA) Percent of Rated Value 100 60 40 20 0 0 25 50 75 100 125 Voltage (V) T J -Initial Junction Temperature (ºC) 2 © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 06/22/21 TVS Diodes Datasheet AK3 Series Axial Leaded – 3kA Ratings and Characteristic Curves (TA=25°C unless otherwise noted) (Continued) Figure 6: Typical VBR Vs Junction Temperature Figure 5: Typical Peak Pulse Power Rating Curve 12 10 10000 8 AK3-430 1000 10/350µs AK3-380 100 6 Percent of VBR Change Pppm -Peak Pulse Power(kW) 8/20µs 10/1000µs AK3-076 4 2 0 -2 -4 10 -6 -8 1 0.00001 0.0001 td -Pulse Width(sec) -50 0.001 -25 0 25 50 75 100 125 Junction Temperature(Tj ) Figure 7: Surge Response (8/20 Surge current waveform) Figure 8: Pulse Waveform IPP – Peak Pulse Current – %IPP Voltage Current Peak Value 100 tr x td =8/20µs 50 Half Value 0 0 Time (µs) tr = rise time to peak value td = decay time to half value tr td t – Time (µs) Note: The power dissipation causes a change in avalanche voltage during the surge and the avalanche voltage eventually returns to the original value when the transient has passed. 3 © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 06/22/21 TVS Diodes Datasheet AK3 Series Axial Leaded – 3kA Part Marking System Part Marking Trace Code Marking Y:Year Code WW: Working Week Code 3-xxxx YWW YWW LF Littelfuse Logo LF 3-XXXX Littelfuse Logo Apply to P/N listed below: AK3-015C AK3-030C AK3-038C AK3-058C AK3-066C AK3-076C Y:Year Code WW: Working Week Code Type 1- Side View Type 2 - Top View Part Numbering System Packing Options AK3 - XXXX Series Type Part Marking Trace Code Marking Apply to P/N listed below: AK3-150C AK3-170C AK3-190C AK3-208C AK3-380C AK3-430C Part Number Stand Off Voltage Component Package Quantity Packaging Option AK3-XXXX AK Package 56pcs/Box Bulk AK3-XXXX-12 AK Package 12pcs/Box Bulk (Please Refer to Electrical Characteristics Chart) Dimensions Dimensions A G L2 A B F L1 C D C B C -208C D E F -015C E -030C/-038C/-066C G -058C/-076C -150C -170C/-190C -208C -380C -430C -208C L1 -208C L2 Inches Millimeters 0.951 +/- 0.040 0.094 +/- 0.024 0.236 +/- 0.039 0.145 +/- 0.040 0.433 max. 0.050 +/- 0.002 0.374 max. 0.093 +/- 0.039 24.15 +/- 1.00 2.40 +/- 0.60 6.00 +/- 1.00 3.68 +/- 1.00 11.0 max. 1.27 +/- 0.05 9.50 max. 2.36 +/- 1.00 0.130 +/- 0.047 3.30 +/- 1.20 0.168 +/- 0.047 4.27 +/- 1.20 0.383 +/- 0.047 9.72 +/- 1.20 0.420 +/- 0.047 10.67 +/- 1.20 0.358 +/- 0.047 9.10 +/- 1.20 0.547 +/- 0.047 13.90 +/- 1.20 0.583 +/- 0.047 14.80 +/- 1.20 0.296 +/- 0.047 7.52 +/- 1.20 L1= L2 tolerance +/- 0.047 inch (+/- 1.20 mm) = A - (G+L1) tolerance +/- 0.047 inch (+/1.20 mm) L1= L2 tolerance +/- 0.047 inch (+/- 1.20 mm) Disclaimer Notice - Littelfuse products are not designed for, and shall not be used for, any purpose (including, without limitation, automotive, military, aerospace, medical, life-saving, life-sustaining or nuclear facility applications, devices intended for surgical implant into the body, or any other application in which the failure or lack of desired operation of the product may result in personal injury, death, or property damage) other than those expressly set forth in applicable Littelfuse product documentation. Warranties granted by Littelfuse shall be deemed void for products used for any purpose not expressly set forth in applicable Littelfuse documentation. Littelfuse shall not be liable for any claims or damages arising out of products used in applications not expressly intended by Littelfuse as set forth in applicable Littelfuse documentation. The sale and use of Littelfuse products is subject to Littelfuse Terms and Conditions of Sale, unless otherwise agreed by Littelfuse. “Littelfuse” includes Littelfuse, Inc., and all of its affiliate entities. http://www.littelfuse.com/disclaimer-electronics 4 © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 06/22/21