AQ36C-01FTG

TVS Diode Array (SPA® Diodes) General Purpose ESD Protection - AQxxC-01FTG Series AQxxC-01FTG Series 450W Bidirectional TVS Diode RoHS Pb GREEN Description The bidirectional AQxxC-01FTG Series is designed to replace multilayer varistors (MLVs) in electronic equipment for low speed and DC applications. It will protect any sensitive equipment from damage due to electrostatic discharge (ESD) and other transient events. The AQxxC-01FTG series can safely absorb repetitive ESD strikes of ±30 kV (contact and air discharge as defined in IEC 61000-4-2) without any performance degradation. Additionally, the AQ05C can safely conduct a 30A 8/20 surge event as defined in IEC 61000-4-5 2nd Edition. Pinout and Functional Block Diagram 1 Features • ESD, IEC 61000-4-2, ±30kV contact, ±30kV air • PPAP capable • EFT, IEC 61000-4-4, 40A (5/50ns) • Small SOD323 package fits 0805 footprints • Lightning, 30A (8/20 as defined in IEC 610004-5 2nd edition) for the AQ05C • AEC-Q101 qualified • Low clamping voltage 2 • Test Equipment / Instrumentation Not Intended for Use in Life Support or Life Saving Applications The products shown herein are not designed for use in life sustaining or life saving applications unless otherwise expressly indicated. ©2018 Littelfuse, Inc. Specifications are subject to change without notice. Revision: 09/21/18 • Moisture Sensitivity Level(MSL -1) • Halogen free, lead free and RoHS compliant Applications • Switches / Buttons Life Support Note: • Low leakage current • Notebooks / Desktops / Servers • Computer Peripherals • Point-of-Sale Terminals • CAN Bus protection • Medical Equipment • Automotive applications TVS Diode Array (SPA® Diodes) General Purpose ESD Protection - AQxxC-01FTG Series Absolute Maximum Ratings Symbol Parameter Value Units Ppk Peak Pulse Power (tp=8/20μs) 450 W TOP Operating Temperature -40 to 150 °C TSTOR Storage Temperature -55 to 150 °C Notes: CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the component. This is a stress only rating and operation of the component at these or any other conditions above those indicated in the operational sections of this specification is not implied. AQ05C Electrical Characteristics (TOP=25ºC) Parameter Symbol Test Conditions Reverse Standoff Voltage VRWM IR=1μA Breakdown Voltage VBR IR=1mA Reverse Leakage Current ILEAK VR=5V 1.0 μA IPP=1A, tp=8/20µs, Fwd 10.0 V IPP=10A, tP=8/20μs, Fwd 14.5 V Clamp Voltage1 VC Dynamic Resistance 2 Peak Pulse Current ESD Withstand Voltage1 Diode Capacitance 1 RDYN TLP, tp=100ns, I/O to Ground Ipp tp=8/20µs VESD CI/O-I/O Min Typ Max Units 5.0 V 6.0 V 0.31 Ω 30.0 A IEC 61000-4-2 (Contact Discharge) ±30 kV IEC 61000-4-2 (Air Discharge) ±30 kV Reverse Bias=0V, f=1MHz 200 pF Max Units 12.0 V AQ12C Electrical Characteristics (TOP=25ºC) Parameter Symbol Test Conditions Reverse Standoff Voltage VRWM IR=1μA Breakdown Voltage VBR IR=1mA Reverse Leakage Current ILEAK Clamp Voltage1 VC Dynamic Resistance2 Peak Pulse Current ESD Withstand Voltage1 Diode Capacitance 1 Revision: 09/21/18 V 1.0 μA 18.5 V IPP=10A, tP=8/20μs, Fwd 23.0 V Ipp tp=8/20µs ©2018 Littelfuse, Inc. Specifications are subject to change without notice. 13.3 VR=12V TLP, tp=100ns, I/O to Ground CI/O-I/O Typ IPP=1A, tp=8/20µs, Fwd RDYN VESD Min 0.41 Ω 17.0 A IEC 61000-4-2 (Contact Discharge) ±30 kV IEC 61000-4-2 (Air Discharge) ±30 kV Reverse Bias=0V, f=1MHz 100 pF TVS Diode Array (SPA® Diodes) General Purpose ESD Protection - AQxxC-01FTG Series AQ15C Electrical Characteristics (TOP=25ºC) Parameter Symbol Test Conditions VRWM IR=1μA Breakdown Voltage VBR IR=1mA Reverse Leakage Current ILEAK Reverse Standoff Voltage VC Clamp Voltage1 Dynamic Resistance2 Peak Pulse Current ESD Withstand Voltage1 Diode Capacitance1 Typ Max 15.0 16.7 Units V V VR=15V 1.0 μA IPP=1A, tp=8/20µs, Fwd 24.0 V IPP=10A, tp=8/20µs, Fwd RDYN TLP, tp=100ns, I/O to Ground Ipp tp=8/20µs VESD Min 31.0 0.46 V Ω 12.0 A IEC 61000-4-2 (Contact Discharge) ±30 kV IEC 61000-4-2 (Air Discharge) ±30 kV CI/O-I/O Reverse Bias=0V, f=1MHz 75 pF Max Units 24.0 V AQ24C Electrical Characteristics (TOP=25ºC) Parameter Symbol Test Conditions VRWM IR=1μA Breakdown Voltage VBR IR=1mA Reverse Leakage Current ILEAK Reverse Standoff Voltage VC Clamp Voltage1 Dynamic Resistance2 Peak Pulse Current ESD Withstand Voltage1 Diode Capacitance1 Typ 26.7 V VR=24V 1.0 μA IPP=1A, tp=8/20µs, Fwd 36.0 V IPP=5A, tp=8/20µs, Fwd RDYN TLP, tp=100ns, I/O to Ground Ipp tp=8/20µs VESD Min 42.0 0.62 7.0 IEC 61000-4-2 (Contact Discharge) ±30 IEC 61000-4-2 (Air Discharge) ±30 CI/O-I/O V Ω A kV kV Reverse Bias=0V, f=1MHz 50 pF Max Units 36.0 V AQ36C Electrical Characteristics (TOP=25ºC) Parameter Symbol Test Conditions VRWM IR=1μA Breakdown Voltage VBR IR=1mA Reverse Leakage Current ILEAK Reverse Standoff Voltage VC Clamp Voltage1 Dynamic Resistance2 Peak Pulse Current ESD Withstand Voltage1 Diode Capacitance 1 1.0 μA V IPP=5A, tp=8/20µs, Fwd Ipp tp=8/20µs 62.0 0.68 V Ω 5.0 A IEC 61000-4-2 (Contact Discharge) ±30 kV IEC 61000-4-2 (Air Discharge) ±30 kV Reverse Bias=0V, f=1MHz 1. Parameter is guaranteed by design and/or component characterization. 2.Transmission Line Pulse (TLP) with 100ns width, 2ns rise time, and average window t1=70ns to t2= 90ns Revision: 09/21/18 V 52.0 Note: ©2018 Littelfuse, Inc. Specifications are subject to change without notice. 40.0 VR=36V TLP, tp=100ns, I/O to Ground CI/O-I/O Typ IPP=1A, tp=8/20µs, Fwd RDYN VESD Min 30 pF TVS Diode Array (SPA® Diodes) General Purpose ESD Protection - AQxxC-01FTG Series Capacitance vs. Bias 160 Capacitance (pF 140 120 SD05C AQ05C 100 80 60 SD12C AQ12C 40 AQ15C SD15C SD24C AQ24C 20 0 0 3 6 9 12 15 18 21 24 AQ36C SD36C 27 30 33 36 Bias Voltage (V 8/20μs Pulse Waveform 110 110% 100 100% 90 90% 80 80% 70 Percent of IPP % of Rated Power I PP Power Derating Curve 60 50 40 30 50% 40% 30% 20 20% 10 0 70% 60% 10% 0 25 50 75 100 125 150 0% 0.0 5.0 10.0 (o Ambient Temperature - TA C) 20.0 25.0 30.0 AQ12C Transmission Line Pulsing(TLP) Plot 22 22 20 20 18 18 16 16 TLP Current (A) TLP Current (A) AQ05C Transmission Line Pulsing(TLP) Plot 14 12 10 14 12 10 8 8 6 6 4 4 2 2 0 0 0 2 4 6 8 10 TLP Voltage (V) ©2018 Littelfuse, Inc. Specifications are subject to change without notice. Revision: 09/21/18 15.0 Time (μs) 12 14 16 18 0 2 4 6 8 10 12 14 16 TLP Voltage (V) 18 20 22 24 26 TVS Diode Array (SPA® Diodes) General Purpose ESD Protection - AQxxC-01FTG Series AQ24C Transmission Line Pulsing(TLP) Plot 22 22 20 20 18 18 16 16 TLP Current (A) TLP Current (A) AQ15C Transmission Line Pulsing(TLP) Plot 14 12 10 14 12 10 8 8 6 6 4 4 2 2 0 0 0 2 4 6 8 0 10 12 14 16 18 20 22 24 26 28 30 32 5 10 15 AQ36C Transmission Line Pulsing(TLP) Plot 25 30 35 40 45 50 Product Characteristics 22 20 18 16 TLP Current (A) 20 TLP Voltage (V) TLP Voltage (V) 14 12 10 Lead Plating Matte Tin Lead Material Copper Alloy Lead Coplanarity 0.0004 inches (0.102mm) Substrate material Silicon Body Material Molded Compound Flammability UL Recognized compound meeting flammability rating V-0 8 6 4 2 0 0 5 10 15 20 25 30 35 40 45 50 55 60 65 TLP Voltage (V) Soldering Parameters Pre Heat Pb – Free assembly 150°C - Temperature Max (Ts(max)) 200°C - Time (min to max) (ts) 60 – 180 secs Average ramp up rate (Liquidus) Temp (TL) to peak 3°C/second max TS(max) to TL - Ramp-up Rate 3°C/second max Reflow - Temperature (TL) (Liquidus) 217°C - Temperature (tL) 60 – 150 seconds Peak Temperature (TP) 260 Time within 5°C of actual peak Temperature (tp) 20 – 40 seconds Ramp-down Rate 6°C/second max Time 25°C to peak Temperature (TP) 8 minutes Max. Do not exceed 260°C ©2018 Littelfuse, Inc. Specifications are subject to change without notice. Revision: 09/21/18 +0/-5 tP TP - Temperature Min (Ts(min)) °C Temperature Reflow Condition Critical Zone TL to TP Ramp-up TL TS(max) tL Ramp-do Ramp-down Preheat TS(min) 25 tS time to peak temperature Time TVS Diode Array (SPA® Diodes) General Purpose ESD Protection - AQxxC-01FTG Series Part Numbering System Automotive Grade TVS Diode Arrays (SPA® Diodes) Ordering Information AQ ** C – 01 F T G G= Green Voltage T= Tape & Reel Bidirectional Package Number of Channels F: SOD323 Part Number Package Min. Order Qty. AQ05C-01FTG SOD323 3000 AQ12C-01FTG SOD323 3000 AQ15C-01FTG SOD323 3000 AQ24C-01FTG SOD323 3000 AQ36C-01FTG SOD323 3000 Part Marking System G* 2 1 Blank: Blank:AQ05C-01FTG SD05C-01FTG 1: 1:AQ12C-01FTG SD12C-01FTG 2: 2:AQ15C-01FTG SD15C-01FTG 3: 3:AQ24C-01FTG SD24C-01FTG 4: 4:AQ36C-01FTG SD36C-01FTG Package Dimensions -SOD323 E A1 SOD323 A2 D b Symbol A L1 Recommended Solder Pad 1.80 c 0.45 0.2 E1 2.30 2.80 Unit: mm ©2018 Littelfuse, Inc. Specifications are subject to change without notice. Revision: 09/21/18 Millimeters Inches Min Max Min Max A - 1.00 - 0.039 A1 0.00 0.10 0.000 0.004 A2 0.80 0.90 0.031 0.035 b 0.25 0.35 0.010 0.014 c 0.08 0.15 0.003 0.006 D 1.20 1.40 0.047 0.055 E 1.60 1.80 0.063 0.071 E1 2.50 2.70 0.098 0.106 L1 0.25 0.40 0.010 0.016 TVS Diode Array (SPA® Diodes) General Purpose ESD Protection - AQxxC-01FTG Series Embossed Carrier Tape & Reel Specification — SOD323 ,Ref. Cpmponent Orientation in Tape Pin1 8mm TAPE AND REEL ,Ref. Symbol Millimeters A0 1.36min/1.62max B0 2.90+/-0.10 W 8.0+0.3/-0.10 D0 1.50+0.10 D1 ø1.00min/ø1.25max E 1.75+/-0.10 E2 - F 3.50+/-0.05 P0 4.00+/-0.10 P 4.00+/-0.10 P1 2.00+/-0.05 K0 1.15min/1.45max T 0.254+/-0.13 ,Ref. Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at http://www.littelfuse.com/disclaimer-electronics. ©2018 Littelfuse, Inc. Specifications are subject to change without notice. Revision: 09/21/18