BD280-1130-15/16

PolySwitch® PTC Devices PRODUCT: BD280-1130-15/16 Overcurrent Protection Device DOCUMENT: SCD26434 REV LETTER: I REV DATE: JULY 26, 2014 PAGE: 1 of 2 Specification Status: Released Electrical Rating Voltage: 14 Vdc MAX Current: 100 A MAX Terminal Material: Brass H65 Thickness: 0.8mm Tin plating thickness: 5μm Insulating Material: Black& Light Blue color PBT, Meets UL94V-0 Requirements Marking: - Manufacturer’s Mark 14VDC - Voltage Rating BD280-1130-10 - Part ID - Lot Number TABLE I. DIMENSIONS : A mm: in*: MIN 30.0 1.181 B MAX 30.6 1.205 MIN 8.7 0.343 C MAX 9.3 0.366 MIN 10.75 0.423 D MAX 11.25 0.443 G H I MIN MAX MIN MAX MIN MAX 3.4 4 1.7 2.3 10.9 11.5 0.134 0.157 0.067 0.091 0.429 0.453 *Rounded off approximation MIN 6.05 0.238 MAX 6.65 0.262 J MIN 0.8 0.031 E(x2) MIN MAX 2.55 3.05 0.1 0.12 F MIN 3.3 0.13 MAX 3.9 0.154 K MAX 1.2 0.047 MIN 0.6 0.024 MAX 1.0 0.039 TABLE II: PERFORMANCE RATINGS: INITIAL RESISTANCE VALUES TIME TO TRIP AT 60AMPS TRIP R1max HOLD TRIPPEDCURRENT AT ONE-HOUR CURRENT AT STATE Rmin POST-TRIP R1max POWER RESISTANCE DISSIPATION OHMS SECONDS AMPS OHMS AMPS WATTS AT AT 25°C AT 25°C AT 25°C AT 25°C AT 25°C 20°C, 14V MIN │MAX MAX MAX MAX MIN TYP 0.0050│0.0070 8.0 20.0 0.010 12.0 4.5 Reference Documents: PS300, PS400 & SAE-J2685 Precedence: This specification takes precedence over documents referenced herein. Effectivity: Reference documents shall be the issue in effect on the date of invitation or bid. CAUTION: Operation beyond the rated voltage or current may result in rupture, electrical arcing or flame. When using a test probe to probe either of the two test points on the top of the device, care should be taken to avoid puncturing through the insulating material of the device, as this can result in shorting out the terminals which can cause electrical arcing or flame. Materials Information ROHS Compliant © 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised July 26, 2016 ELV Compliant Pb-Free littelfuse.com PolySwitch® PTC Devices Overcurrent Protection Device PRODUCT: BD280-1130-15/16 DOCUMENT: SCD26434 REV LETTER: I REV DATE: JULY 26, 2014 PAGE: 2 of 2 Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their Own applications. Littelfuse products are not designed for, and shall not be used for, any purpose (including, without limitation, military, aerospace, medical, lifesaving, life-sustaining or nuclear facility applications, devices intended for surgical implant into the body, or any other application in which the failure or lack of desired operation of the product may result in personal injury, death, or property damage) other than those expressly set forth in applicable Littelfuse product documentation. Warranties granted by Littelfuse shall be deemed void for products used for any purpose not expressly set forth in applicable Littelfuse documentation. Littelfuse shall not be liable for any claims or damages arising out of products used in applications not expressly intended by Littelfuse as set forth in applicable Littelfuse documentation. The sale and use of Littelfuse products is subject to Littelfuse Terms and Conditions of Sale, unless otherwise agreed by Littelfuse. © 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised July 26, 2016 littelfuse.com