C122J13S205PQA

C&K C Series Power Rocker Switches Features/Benefits • Positive detent • Attractive design • Snap-in mounting Typical Applications • Floor care products • Power outlet strips • Small appliances Models Available Specifications Materials CONTACT RATING: All Models: 15 AMPS @ 125 V AC; 10 AMPS @ 250 V AC . Models also available with see rating section. ELECTRICAL LIFE: 10,000 make-and-break cycles at full load. INSULATION RESISTANCE: 109 Ω min. DIELECTRIC STRENGTH: 2,500 Vrms min. @ sea level. HOUSING & ACTUATOR: 6/6 nylon (UL 94V-2), black (standard). MOVABLE CONTACTS: Copper, silver plated. STATIONARY CONTACT & TERMINALS: C121, C122 models with ‘QA’ rating: Copper, silver plated. C221, C222 models with ‘QA’ rating: Copper. All models with ‘QF’ rating: Copper, silver plated. CONTACT SPRING: Music wire or stainless steel. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service center. Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages G-69 and G-70. For additional options not shown in catalog, consult Customer Service Center. Switch Function C121 (STD.) SPDT, On-On C122 SPST, On-Off C221 (STD.) DPDT, On-On C222 DPST, On-Off Actuator J1 (STD.) Rocker Actuator Color 2 (STD.) Black 1 White 3 Red Mounting Style/Color S2 (STD.) Snap-in, black S1 Snap-in, white Terminations 05 (STD.) Quick connect WC Wire Wrap Rocker Actuator Markings NONE (STD.) No markings D ON-OFF H O| Contact Material K ON-OFF QA (STD.) Silver (UL/CSA) P O– QF (STD.) Silver (UL/CSA/VDE) G Dimensions are shown: IN (mm) Dimensions subject to change G-69 www.ittcannon.com C&K C Series Power Rocker Switches SWITCH FUNCTION SWITCH FUNCTION POS. 1 NO. POLES POS. 2 CONNECTED TERMINALS POS. 1 POS. 2 2-1 1-1A 2-3 1-1B SCHEMATIC MODEL NO. 2 C121 (STD.) ON ON SPDT SP C122 ON OFF 2-1 1-1A OPEN 1-1A, 2-2A 1-1B, 2-2B 1 1 3 1 2 SPDT SPST (STD.) ON ON DPDT DP ON OFF 1-1A, 2-2A 1A 1 1A 2 1B 2A 1 C222 1B SPST 1 C221 1A 1 2B DPDT 1A 2 1B 2 2A 1 2B 2 OPEN DPST 1A 2A DPST 1A 2A SPDT POS.1 POS.2 Part number shown: C121J12S205QF All models with all options. Only models with ‘QF’ rating meet international dimensional and electrical requirements . Contacts make on side opposite actuator thrown. ACTUATOR COLOR ACTUATOR Rocker J1 SP OPTION CODE DP ACTUATOR COLOR 2 (STD.) BLACK 1 WHITE 3 RED NOTE: Actuator finish: gloss (standard). Other colors available, consult Customer Service Center. MOUNTING STYLE/COLOR S1, S2 SNAP-IN OPTION CODE G ACTUATOR (STD.) ROCKER SP (STD.) BLACK S1 WHITE DP PANEL THICKNESS: .020 (0,51) TO .200 (5,08) HOUSING COLOR S2 PANEL MOUNTING NOTE: Frame finish on housing: gloss (standard). Other colors available, consult Customer Service Center. Third Angle Projection Dimensions are shown: IN (mm) Dimensions subject to change G-70 www.ittcannon.com C&K C Series Power Rocker Switches TERMINATIONS 05 WC (STD.) QUICK CONNECT WIRE WRAP Available with ‘QA’ contact material only, ( only) SP models only. Black wire standard, other colors and lengths available, consult Customer Service Center. UL style 1015. ACTUATOR MARKINGS NONE D (STD.) NO MARKING H ON-OFF O-I 1B 3 2 1 K P ON-OFF O– or 1 1A NOTE: Orientation of actuator markings and terminals. ‘D, H, K & P’ marking options: marking color white, standard for all actuator colors except white. Black, standard for white actuators. Consult Customer Service Center for other available markings and colors. CONTACT MATERIAL OPTION CODE QA (STD.) QF (STD.) CONTACT AND TERMINAL MATERIAL RATINGS 15 AMPS @ 125 V AC; 10 AMPS @ 250 V AC (UL/CSA). SILVER 1,2 POWER 15 AMPS @ 125 V AC; 10 AMPS @ 250 V AC (UL/CSA/VDE). CONTACT MATERIAL/APPLICATION RECOMMENDATIONS – SEE SECTION N. 1 STATIONARY CONTACT & TERMINALS: All models with ‘QA’ rating: Copper, silver plated. All models with ‘QF’ rating: Copper, silver top lay. 2 MOVABLE CONTACTS: Copper, silver plated. All models . and electrical requirements Rocker Only models with ‘QF’ rating meet international dimensional . NOTE: ‘QF’ rating available with ‘05’ terminations only. Third Angle Projection Dimensions are shown: IN (mm) Dimensions subject to change G-71 www.ittcannon.com G