CA-945

Accessories Terminations, Adapters terminations and adapters Terminations AND ADAPTERS Product 1N5339B Termination Device SE-TA6-SM Stud-Mount Termination Assembly SE-TA6 Termination Assembly SE-TA6A (PGA-0T6A) Termination Assembly SE-TA6A-WL Termination Assembly SE-TA6ASF-WL Small-Format Termination Assembly with Wire Leads SE-TA12A Termination Assembly SE-TA12ASF-WL Small-Format Termination Assembly with Wire Leads SE-TA12A-WL Termination Assembly SE-TA12A SE-TA12B Termination Assemblies PPI-600V Parallel Path Isolator RK-13 Relay Interface Module SE-485-DIN Industrial RS-485 to RS-232 Converter SE-485-PP Port-Powered Serial Converter CA-945 Serial Connector Adapter Kit SE-ICUSB232 USB to RS-232 Converter www.littelfuse.com/relayscontrols Features Accessory For 5 W axial-lead ground-check termination. Included with SE-105 and SE-107. SE-105 SE-107 50 W ground-check termination that is robust and compact for submersible pumps. Wire lead simplifies installation. (Replacement for 1N4553B) SE-105 SE-107 50 W ground-check termination with convenient mounting holes and screw terminals. SE-105 SE-107 Temperature compensated 50 W ground-check termination with convenient mounting holes and screw terminals. SE-105 SE-107 SE-134C Temperature compensated 50 W ground-check termination with convenient mounting holes and screw terminals. SE-105 SE-107 SE-134C Temperature compensated 12 W ground-check termination, ideal for use in cable-coupler end caps and submersible pumps. Mounting holes and wire leads. SE-105 SE-107 SE-134C Temperature compensated 50 W ground-check termination with convenient mounting holes and screw terminals. SE-135 SE-145 Temperature compensated 12 W ground-check termination, ideal for use in cable-coupler end caps and submersible pumps. Mounting holes and wire leads. SE-135 SE-145 Temperature compensated 50 W ground-check termination with convenient mounting holes and screw terminals. SE-135 SE-145 Used together to allow an SE-134C to monitor a splitter box and two cables. SE-134C Parallel ground-path rejection for ground-check monitors. Eliminates intermachine arcing and prevents stray DC currents from flowing in a monitored ground wire. SE-105 SE-107 SE-134C SE-135 Separate ground-fault and ground-check indication contacts for the SE-105, and separate ground-fault and resistor-fault contacts for the SE-325. Used to provide output to a PLC and operate standard pilot lights. Complete with conformally coated circuit boards. SE-105 SE-107 SE-325 MPS FPS Industrial network quality RS-485 to RS-233 serial converter. DIN-rail mounted, 24 Vdc required. Converts an RS-485 signal to an RS-232 signal. Used for set-point programming and updating flash memory. 115.2 kbit/s maximum transfer rate. Connects an RJ45 to a 9-pin serial connector. Includes 1.5 m cable and plug-in adapter. Connects a 9-pin serial cable to a USB port. MPU-32 FPU-32 MPS FPS MPU-32 FPU-32 SE-330 SE-330AU SE-485-PP CA-945 SE-330HV SE-485-DIN © May 2012 Littelfuse Protection Relays & Controls Accessories Terminations, Adapters terminations and adapters Terminations AND ADAPTERS Product A0033 Features Accessory For Extension cable for the A0200 and A0300 sensors. D0900 AC700-CUA Optical network-interface and firmware-upgrade communication adapter. Field-installed. EL731 D0400 Junction box without indication, for parallel connection of more than 2 sensors for one relay. Designed to connect up to 8 sensors. D0900 D0500 Junction box with indication, for parallel connection of more than 2 sensors for one relay. Designed to connect up to 8 sensors. D0900 USB Cable with A/Mini-B plug (2 m). E5000 Detector Cable Communications Adapter Junction Box (No Indication) Junction Box (Indication) E5540 USB Cable G0100 Programming Kit K 3452 &K3450 RS232 Cable K1025 USB A-B Cable T4910 Potentiometer with Cable www.littelfuse.com/relayscontrols Connects to RS232 port. Includes blank front-plate labels and permanent pen for texting scales. G2000 G3000 G3300 For configuration from PC. M2000 USB A to B cable. M2500 For external power factor setting. External contact between terminals 12 (COM) and 28 (PF ON). Included. T4900 © May 2012 Littelfuse Protection Relays & Controls