CL102J72S205DQA

CL Series Single Pole Power Rocker Switches Features/Benefits • Illuminated versions available • Positive detent • Snap-in mounting Typical Applications • Floor care products • Power outlet strips • HVAC units • RoHS compliant Specifications Materials CONTACT RATING: 16 AMPS @ 125 VAC, 1/3 HP; 10 AMPS @ 250 VAC, 1/2 HP. ELECTRICAL LIFE: 10,000 make and break cycles at full load. INSULATION RESISTANCE: 108 Ω min. HOUSING AND ACTUATOR: 6/6 nylon (UL94V-2), black, matte finish. ILLUMINATED ACTUATOR: Polycarbonate, matte finish. CENTER CONTACTS: Silver plated, copper alloy. END CONTACTS: Silver plated. ALL TERMINALS: Silver plated, copper alloy. DIELECTRIC STRENGTH: 1,500 VRMS @ sea level. OPERATING TEMPERATURE: -20ºC to +80ºC NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages G–91 through G–93. For additional options not shown in catalog, consult Customer Service Center. Switch Function CL101 SPDT On-None-On CL102 SPST On-None-Off CL12 * SPST On-None-Off Actuator J7 Rocker J9 Illuminated rocker Actuator Color 2 Black 1 White 3 Red R Red, illuminated A Amber, illuminated G Green, illuminated Mounting Style/Color S2 Snap-in, black S1 Snap-in, white Termination 05 .250” quick connect Actuator Marking (NONE) No marking D ON-OFF H ”O l” - international ON-OFF P ”O -” international ON-OFF Contact Rating QA Silver Rocker Lamp Rating (NONE) No lamp 7 125 VAC neon 8 250 VAC neon * CL12 - for switches with both marking and illumination Dimensions are shown: Inches (mm) Specifications and dimensions subject to change G–87 www.ckswitches.com G CL Series Single Pole Power Rocker Switches SWITCH FUNCTION CONNECTED TERMINALS SWITCH FUNCTION Pos. 1 NO. POLES Pos. 1 Pos. 3 ON NONE Pos. 2 Pos. 3 SCHEMATIC C&K marking on opposite side C&K marking on opposite side MODEL NO. CL101 Pos. 2 ON 2-3 2-1 N/A SP CL102 ON NONE OPEN OFF 2-1 CL12 * ON NONE OR For Illuminated Version OFF * CL12 - for switches with both marking and illumination Shown in Pos. 1 ACTUATOR J7 ROCKER J9 ILLUMINATED ROCKER NOTE: J9 actuator available with CL102 & CL12 switch function only. Rocker ACTUATOR COLOR G OPTION CODE ACTUATOR COLOR 2 BLACK 1 WHITE 3 RED R RED, ILLUMINATED A G AMBER, ILLUMINATED GREEN, ILLUMINATED Dimensions are shown: Inches (mm) Specifications and dimensions subject to change G–88 www.ckswitches.com CL Series Single Pole Power Rocker Switches MOUNTING STYLE/COLOR S2 S1 SNAP-IN, BLACK SNAP-IN, WHITE PANEL MOUNTING “X” “Y” 0.030-0.049 (0,75-1,25) 0.049-0.079 (1,25-2,0) PANEL THICKNESS 1.126-.004 (28,6-0,1) 1.134-.004 (28,8-0,1) 0.551+.004 (14,0+0,1) 0.551+.004 (14,0+0,1) 1.150-.004 (29,2-0,1) 0.551+.004 (14,0+0,1) 0.079-0.118 (2,0-3,0) Shown in Pos. 1 TERMINATION 05 .250” QUICK CONNECT Shown in Pos. 1 ACTUATOR MARKING NONE H Ol NO MARKING D ON-OFF P O- Rocker NOTE: Orientation of actuator marking and terminals. Shown in Pos. 1 Dimensions are shown: Inches (mm) Specifications and dimensions subject to change G–89 www.ckswitches.com G CL Series Single Pole Power Rocker Switches CONTACT MATERIAL OPTION CODE CONTACT AND  TERMINAL MATERIAL QA SILVER RATINGS 16 AMPS @ 125 VAC; 1/3 HP; POWER 10 AMPS @ 250 VAC, 1/2 HP * Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications. LAMP RATING (NONE) NO LAMP 7 125 VAC 33kΩ NEON 8 250 VAC 150kΩ NEON Rocker NOTE: Lamp rating for J9 actuator option. G Dimensions are shown: Inches (mm) Specifications and dimensions subject to change G–90 www.ckswitches.com