DSTF10200C

Schottky Barrier Rectifier DSTF10200C, 2x5A, 100V, ITO-220AB, Common Cathode DSTF10200C Pb Description Littelfuse DST series Ultra Low VF Schottky Barrier Rectifier is designed to meet the general requirements of commercial and industry applications by providing high temperature, low leakage and lower VF products. It is suitable for high frequency switching mode power supply, free-wheeling diodes and polarity protection diodes. Features 3 ode K de • U  ltra low forward voltage drop Pin out Heat sink on de • High frequency operation Common Cathode 1 2 • H  igh junction temperature capability 3 1 Anode Common Anode Cathode 2 Pinout 2 TO-220AB Common Cathode • C  ommon cathode configuration in ITO220AB package • S  witching mode power supply • Free-Wheeling diodes • Polarity Protection Diodes • DC/DC converters Pinout 3 ITO-220AB Common Cathode Parameters Heat sink Peak Inverse Voltage Symbol Test Conditions Max Unit V VRWM - 200 Average Forward Current IF(AV) 50% duty cycle @TC =90°C rectangular wave form 5 (per leg) 10 (total device) Peak One Cycle Non-Repetitive Surge Current (per leg) IFSM 8.3 ms, half Sine pulse 120 Cathode Cathode • G  uard ring for enhanced ruggedness and long term reliability Applications 3 Anode Common Anode Cathode Maximum Ratings 3 e RoHS Cathode Anode A A 1 2 Electrical Characteristics Pinout 5 TO-220AC Parameters Forward Voltage Drop (per leg) * Reverse Current (per leg) * Junction Capacitance (per leg) RSM Isolation Voltage (t = 1.0 second, R. H. < =30%, TA = 25 °C) Symbol Test Conditions Typ Max VF1 @5A, Pulse, TJ = 25 °C 0.81 0.90 VF2 @5A, Pulse, TJ = 125 °C 0.67 0.73 Unit V IR1 @VR = rated VR TJ = 25 °C 0.19 10 μA IR2 @VR = rated VR TJ = 125 °C 0.33 150 mA pF CT VISO @VR = 5V, TC = 25 °C, fSIG = 1MHz 106 - Clip mounting, the epoxy body away from the heatsink edge by more than 0.110” along the lead direction. - 4500 Clip mounting, the epoxy body is inside the heatsink. - 3500 Screw mounting, the epoxy body is inside the heatsink. - 1500 V * Pulse Width < 300μs, Duty Cycle