DURF1060

Ultrafast Recovery Rectifier DURF1060, 10A, 600V, ITO-220AC DURF1060 RoHS Pb e3 Littelfuse DUR series Ultrafast Recovery Rectifier is designed to meet the general requirements of commercial applications by providing low Trr, high-temperature, lowleakage and low forward voltage drop products. It is suitable for output rectifier, free-wheeling or boost diode in high-frequency power switching application such as switch mode power supply and DC-DC converters. Features • Ultra-fast switching • L  ow reverse leakage current • H  igh surge current capability • Low forward voltage drop • Single die in two-leaded, • Pb-free E3 means 2nd level interconnect is Pb-free and the terminal finish material is tin(Sn) (IPC/JEDEC J-STD609A.01) Applications Circuit Diagram • O  utput rectifiers in switch mode power supplies (SMPS) and DC to DC converters 1 Cathode electrically isolated ITO220AC package • F  ree-wheeling diode or boost diode in converters and motor control circuits 2 Anode • U  ninterruptible Power Supplies (UPS) • Inductive heating and melting • U  ltrasonic cleaners and welders • A  nti-parallel diode for high frequency switching devices such as IGBT Maximum Ratings Characteristics Peak Inverse Voltage Symbol Conditions Max. Unit VRWM - 600 V 10 A 100 A Unit Average Forward Current IF(AV) 50% duty cycle @TC =105 °C, rectangular wave form Peak One Cycle NonRepetitive Surge Current ( Per Leg) IFSM 8.3 ms, half sine pulse Electrical Characteristics Characteristics Forward Voltage Drop1 Reverse Current1 Reverse Recovery Time Symbol Conditions Max. VF1 @10A, Pulse, TJ = 25 °C 2.2 V VF2 @10A, Pulse, TJ = 100 °C 2.0 V IR1 @VR = Rated VR , TJ = 25 °C 10 μA IR2 @VR = Rated VR , TJ = 125 °C 500 μA trr1 IF=500mA, IR=1A,and Irm=250mA 32 ns Footnote 1: Pulse Width < 300μs, Duty Cycle