GTCR38-151M-R10

GTCR38-151M-R10

  • 厂商:

    HAMLIN

  • 封装:

    Radial Cylinder,3 Lead

  • 描述:

    GDT 150V 20% 10KA THROUGH HOLE

  • 详情介绍
  • 数据手册
  • 价格&库存
GTCR38-151M-R10 数据手册
Gas Discharge Tubes GTCX38-XXXM-R10 Series Littelfuse Circuit Protection 8mm 3Pole GDTs (ceramic gas discharge tubes), are commonly used to help protect sensitive telecom equipment such as communication lines, signal lines and data transmission lines from damage caused by transient surge voltages that typically result from lightning strikes and equipment switching operations. Littelfuse Circuit Protection GDTs offer a high level of surge protection, low capacitance and a broad array of breakover voltage levels, making them suitable for applications such as MDF (Main Distribution Frame) modules, high data-rate telecom applications (e.g. ADSL, VDSL), and surge protection on power lines. Littelfuse Circuit Protection GDTs can help equipment meet the most stringent regulatory standards. Benefits: Features:  Helps provide overvoltage fault protection against high energy surges  3Pole, 8mm devices  Suitable for high-frequency applications  Various form factors: surface-mount, leaded, no leads  Broad voltage range from 75V-600V  Optional fail-short mechanism on some devices  Low capacitance and insertion loss  Crowbar overvoltage protection  UL 497B recognized  RoHS compliant  Devices tested per ITU K.12 recommendations  Non-radioactive materials  Applications:  Telecommunications • Industrial and consumer electronics, such as - MDF modules, xDSL equipment, RF system - Surge protectors protection, antenna, base station - Alarm system   Telecommunications © 2016 Littelfuse,Inc. Specifications subject to changexDSL withoutequipment, notice.  are MDF modules, RF sytem Revised July 26,2016  Protection, antenna, pase station • Industrial and consumer electronics, such as 1 Document: SCD27381 Status: Released Rev: D Date: JULY 26, 2016 Gas Discharge Tubes GTCX35-XXX-R05 Series GTCX38-XXXM-R10 Series Device Voltage Ratings and Part Marking Part Number Impulse Sparkover DC Sparkover DC Holdover Voltage On-State Voltage @100V/s ±20% Tolerance (V) @100 Vµs (V) @1000 Vµs (V) GTCX38-750M-R10 75 450 550
GTCR38-151M-R10
物料型号:GTCX38-XXXM-R10系列

器件简介:气体放电管(Gas Discharge Tubes,GDTs),用于提供过压故障保护,防止高能量浪涌,适用于高频应用。

引脚分配:3极,8毫米设备,有多种封装形式,包括表面贴装、有引线和无引线。

参数特性: - 工作电压范围从75V至600V - 电容值低,插入损耗低 - 符合UL 497B标准 - 符合RoHS指令 - 根据ITU K.12建议进行测试 - 使用非放射性材料

功能详解: - 用于保护通信线路、信号线和数据传输线免受瞬态浪涌电压的损害 - 提供高级别的浪涌保护 - 适用于MDF模块、高速数据传输应用(如ADSL、VDSL)和电源线上的浪涌保护

应用信息: - 电信 - 工业和消费电子,如MDF模块、xDSL设备、RF系统保护、天线、基站、报警系统

封装信息: - 轴向引线(GTCA38-XXXM-R10)、径向引线(GTCR38-XXXM-R10)、表面贴装(GTCS38-XXXM-R10)和无引线(GTCN38-XXXM-R10) - 包装信息包括托盘/卷轴标准包装,例如无引线:100pcs(托盘)1,000pcs,有引线:100pcs(托盘)1,000pcs,表面贴装:100pcs(托盘)1,000pcs
GTCR38-151M-R10 价格&库存

很抱歉,暂时无法提供与“GTCR38-151M-R10”相匹配的价格&库存,您可以联系我们找货

免费人工找货