GTCS25-750M-R02-2

Gas Discharge Tubes GTCX25-XXXM-R02 Series Littelfuse Circuit Protection 5mm 2Pole GDTs (ceramic gas discharge tubes), are commonly used to help protect sensitive telecom equipment such as communication lines, signal lines and data transmission lines from damage caused by transient surge voltages that typically result from lightning strikes and equipment switching operations. Littelfuse Circuit Protection GDTs offer a high level of surge protection, low capacitance and a broad array of breakover voltage levels, making them suitable for applications such as MDF (Main Distribution Frame) modules, high data-rate telecom applications (e.g. ADSL, VDSL), and surge protection on power lines. Littelfuse Circuit Protection GDTs, can help equipment meet the most stringent regulatory standards. Benefits: Features:  Compact, small form factor suitable for efficient assembly  2Pole, 5mm devices  Broad voltage range from 75V-600V  Helps provide overvoltage fault protection against high energy surges  Various form factors: surface mount, axial leads, no leads  Suitable for high-frequency applications  Low capacitance and insertion loss  UL 497B recognized  RoHS compliant  Devices tested per ITU K.12 recommendations  Non-radioactive materials Applications:  Telecommunications • Industrial and consumer electronics, such as - MDF modules, xDSL equipment, RF system - Surge protectors protection, antenna, base station - Alarm system   Telecommunications © 2016 Littelfuse,Inc. Specifications subject to changexDSL withoutequipment, notice.  are MDF modules, RF sytem Revised July 26,2016  Protection, antenna, pase station • Industrial and consumer electronics, such as 1 Document: SCD27304 Status: Released Rev: B Date: JULY 26, 2016 Gas Discharge Tubes GTCX25-XXXM-R02 Series Device Voltage Ratings and Part Marking Part Number Impulse Sparkover DC Sparkover DC Holdover Voltage On-State Voltage @100V/s ±20% Tolerance (V) @100 V/µs (V) @1000 V/µs (V) GTCX25-750M-R02 75 450 550